Liebherr LHM 280 User Manual

Page 1
Mobile Harbour Crane
LHM 280
Page 2
Main dimensions
Bulk operation
Load diagram
90
80
70
60
50
40
Capacity (t)
30
20
10
0
on the ropes
motor grab
4-rope grab
5 10 15 20 25 300
35 40 45
2 LHM 280
28.3 m
Boom fulcrum 15.4 m
11 m
Eye level 20.8 m
Handymax Bulk Carrier
Above quay max. 48 m
(depending on grab)
Below quay 12 m
Page 3
Bulk operation
Maximum crane capacity 84 t
Hook operation Grab operation
Outreach on the ropes 4-rope grab motor grab
(m) (t) (t) (t)
10 84.0 45.0 52.0
11 84.0 45.0 52.0
12 84.0 45.0 52.0
13 84.0 45.0 52.0
14 84.0 45.0 52.0
15 84.0 45.0 52.0
16 81.8 45.0 52.0
17 76.5 45.0 52.0
18 72.8 45.0 51.7
19 68.3 45.0 48.5
20 65.1 45.0 46.3
21 62.2 44.2 44.2
22 58.6 41.7 41.7
23 55.0 39.1 39.1
24 51.4 36.5 36.5
25 48.5 34.5 34.5
26 45.6 32.4 32.4
28 40.7 29.0 29.0
30 36.6 26.0 26.0
32 33.1 23.5 23.5
34 30.1 21.4 21.4
36 27.4 19.5 19.5
38 25.1 17.9 17.9
40 22.6 16.1 16.1
Weight ramshorn hook 2.7 t Weight rotator 2.2 t
Maximum crane capacity 64 t
Hook operation Grab operation
Outreach on the ropes 4-rope grab motor grab
(m) (t) (t) (t)
10 64.0 35.0 42.0
11 64.0 35.0 42.0
12 64.0 35.0 42.0
13 64.0 35.0 42.0
14 64.0 35.0 42.0
15 64.0 35.0 42.0
16 64.0 35.0 42.0
17 64.0 35.0 42.0
18 64.0 35.0 42.0
19 64.0 35.0 42.0
20 64.0 35.0 42.0
21 62.2 35.0 42.0
22 58.6 35.0 41.7
23 55.0 35.0 39.1
24 51.4 35.0 36.5
25 48.5 34.5 34.5
26 45.6 32.4 32.4
28 40.7 29.0 29.0
30 36.6 26.0 26.0
32 33.1 23.5 23.5
34 30.1 21.4 21.4
36 27.4 19.5 19.5
38 25.1 17.9 17.9
40 22.6 16.1 16.1
Weight ramshorn hook 2.7 t Weight rotator 2.2 t
Professional bulk handling – Turnover up to 1000 t per hour
The powerful hydrostatic transmission and advanced Liebherr electronics ensure short, productive working cycles during bulk handling.
• During grab operation, hoisting, slewing, and luffing are driven simultaneously at maximized speed to achieve the highest (possible) turnover.
• During grab filling, features such as automatic lowering and hoisting guarantee the optimum filling level of the grab.
• The slack rope monitoring system ensures extended life­time of the ropes and increases operational safety.
• Reverse power is returned to the drive process through closed loop hydraulics which results in reduced fuel consumption.
®
• The Cycoptronic
anti-sway system automatically compensates for all rotational swing, transverse and longitudinal sway of the load at maximum speeds.
• To provide safe and stress-free working conditions for
®
the operator, Liebherr offers the Cycoptronic
®
Teach-In
feature, a semi-automatic system, which pilots
including
the crane from the vessel hatch to the quay without any sway. Especially for bulk operation into hoppers,
®
the Teach-In
system increases turnover and ensures
consistent turnover rates during the entire ship unloading.
• Liebherr technology is absolutely resistant to all types of dust and dirt due to the closed hydraulic system and an electronic system which is military proven and tested.
• The airflow needed for cooling hydraulic and engine systems is routed external from the main machinery house. This helps keep the engine room clean and free of debris.
LHM 280 3
Page 4
Main dimensions
Container operation
Load diagram
90
80
70
60
50
40
Capacity (t)
30
20
10
0
on the ropes
s
e
m
i
-
a
u
t
o
m
a
t
i
c
s
p
r
e
a
d
e
automatic spreader
5 10 15 20 25 300
35 40 45
r
28.3 m
Boom fulcrum 15.4 m
1 2 3 4 5 6 7 8 9 10 11
Eye level 20.8 m
Above quay max. 48 m
Handy Sized Vessel
Below quay 12 m
11 m
4 LHM 280
Page 5
Container operation
Maximum crane capacity 84 t
Hook operation Capacity under 40´ spreader
Outreach on the ropes automatic semi-automatic
(m) (t) (t) (t)
10 84.0 41.0 36.0
11 84.0 41.0 36.0
12 84.0 41.0 36.0
13 84.0 41.0 36.0
14 84.0 41.0 36.0
15 84.0 41.0 36.0
16 81.8 41.0 36.0
17 76.5 41.0 36.0
18 72.8 41.0 36.0
19 68.3 41.0 36.0
20 65.1 41.0 36.0
21 62.2 41.0 36.0
22 58.6 41.0 36.0
23 55.0 41.0 36.0
24 51.4 40.2 36.0
25 48.5 37.3 36.0
26 45.6 34.4 36.0
28 40.7 29.5 35.9
30 36.6 25.4 31.8
32 33.1 21.9 28.3
34 30.1 18.9 25.3
36 27.4 16.2 22.6
38 25.1 13.9 20.3
40 22.6 11.4 17.8
Weight rotator 2.2 t Weight fully automatic (telescopic) spreader 9 t Weight semi-automatic spreader 1.3 t (20 f t), 2.6 t (40 ft)
Maximum crane capacity 64 t
Hook operation Capacity under 40´ spreader
Outreach on the ropes automatic semi-automatic
(m) (t) (t) (t)
10 64.0 41.0 36.0
11 64.0 41.0 36.0
12 64.0 41.0 36.0
13 64.0 41.0 36.0
14 64.0 41.0 36.0
15 64.0 41.0 36.0
16 64.0 41.0 36.0
17 64.0 41.0 36.0
18 64.0 41.0 36.0
19 64.0 41.0 36.0
20 64.0 41.0 36.0
21 62.2 41.0 36.0
22 58.6 41.0 36.0
23 55.0 41.0 36.0
24 51.4 40.2 36.0
25 48.5 37.3 36.0
26 45.6 34.4 36.0
28 40.7 29.5 35.9
30 36.6 25.4 31.8
32 33.1 21.9 28.3
34 30.1 18.9 25.3
36 27.4 16.2 22.6
38 25.1 13.9 20.3
40 22.6 11.4 17.8
Professional container handling – Turnover up to 35 cycles per hour
Precision to perfection: With incredibly short acceleration times for all crane motions, Liebherr is the top performer in container handling.
• The crane can be fitted with various types of spreaders (fixed or telescopic) connected to the rotator. Manual, semi or fully automatic telescopic spreaders are available for various container sizes.
®
• Liebherr Cycoptronic
is an accurate, sway-free load motion
control system that uses in-house designed software.
®
Cycoptronic
allows for direct load positioning and aids the crane driver in mastering his task. With Cycoptronic turnover, safety and the confidence of the operator will be improved.
• Safety: The luffing cylinder is positioned above the lattice boom. This eliminates the possibility of any damage to the cylinder through swinging loads or highly stowed rows of containers on board the vessel.
• The Liebherr hydrostatic drive is the most reliable and highest performing drive system for mobile harbour cranes. Independent closed loop hydraulic systems utilize
®
the minimum number of components to guarantee highly responsive, smooth and precise operation while maximizing operational safety.
LHM 280 5
Page 6
Undercarriage
Mobility
• Outstanding mobility and manoeuvrability
• Curves at any possible radii and even slewing
on the spot
longitudinally
diagonally
Modular propping system
• Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay
• Modular system allows further reduction of quay loads by installing additional axle sets
• Easy adaptation to various sizes of support pads and bases
11 m
1.3 m
5.5 m
5.4 m
11 m
sideways
curves
slewing on the spot
Hydraulic load distribution
• Hydraulic suspension avoids overloading of individual wheel sets Standard trailer tyres making requisition of spares economical and time-saving Increased lifetime of tyres due to individually steerable wheel sets
Schematic diagram
6 LHM 280
Optimum pressure distribution and adaption of wheel sets on uneven surfaces
Page 7
Technical data
Capacity and Classification
Capacity Classification
Grab operation < 36 t A8
Grab operation < 45 t A7
Container < 55 t A6
Heavy lift 84 t A4
Main dimensions
Min. to max. outreach 10—4 0 m Height of boom fulcrum 15.4 m Tower cabin height (eye level) 20.8 m Overall height (top of tower) 28.3 m Overall length of undercarriage 16.2 m Overall width of undercarriage 5.4 m
Propping arrangements
Standard supporting base 11 m x 11 m Standard pad dimension 4 x 5.5 m x 1.3 m Standard supporting area of pads 7.15 m2 Optional size of supporting pads and bases on request
Quay load arrangements
Uniformly distributed load 1.12 t /m2 Max. load per tyre 5.02 t Due to a unique undercarriage design its parameters (pad sizes, supporting base and number of axle sets) can easily be adapted to comply with the most stringent quay load restrictions.
Weight
Total weight approx. 241 t
Working speeds
Hoisting / lowering 0 — 90 m/min Slewing 0 — 1.6 rpm Luffing 0 — 75 m/min Travelling 0 — 5.4 km/h
Optional equipment
1. Cycoptronic
2. Teach-In - semi-automatic point to point system
3. Sycratronic® - synchronizing crane control system
4. Vertical Line Finder - diagonal pull preventing system
5. Dynamic anti-collision system
®
- anti-sway system
Hoisting heights
Above quay at minimum radius 48 m Above quay at maximum radius Below quay level 12 m
11. Video monitoring system
12. Radio remote control
13. Autopropping undercarriage
14. Cyclone air-intake system for the engine
15. Low temperature package
22 m
6. Lidat® - basic package
7. Lidat® - tele service package
8. Lidat® - turnover package
9. SCULI - crane analyzer with various features
10. Economy software - for optimised fuel consumption
16. Customer-specific painting & logo
17. Additional (driven) axle sets
18. Axle sets equipped with foamed tyres
19. Different supporting bases and pad sizes
20. And many more as per customers´ requirements
LHM 280 7
Page 8
Practical solutions
Liebherr develops and produces special designs and solutions to meet customer-specific requirements
• The Liebherr Portal Crane, LPS, is an efficient combination of a space-saving portal (mounted on rails) and the proven mobile harbour crane concept. Particularly on narrow quays, individual portal solutions permit (railway) trains and (road) trucks to travel below the portal.
Liebherr-Werk Nenzing GmbH
P.O. Box 10, A-6710 Nenzing/Austria Tel.: +43 50809 41-725 Fax: +43 50809 41-447 mobile.harbour.crane@liebherr.com www.liebherr.com
• Liebherr Fixed Slewing Cranes (LFS) are an efficient combination of a mobile harbour crane upper carriage and a fixed pedestal. LFS cranes provide an economical and space­saving solution for the installation on quaysides and jetties, especially where room for manoeuvring is limited and low ground pressure is essential.
LHM 280 —10020138—06/2012—Subject to change without notice.
Loading...