WASHING
MACHINE
Please read this manual carefully before operating your washing machine and retain it for future reference.
FH496TDL23 FH2B8EDL21 FH0B8QDL2
FH496TDL24 FH296EDL24 FH296EDL23
FH4B8EDL21 FH0B8EDL2 FH0B8EDL21
FH0B8QDL22
MFL67584557
P/NO : MFL67584557 |
_ |
Rev. No.: 00
Drawer
(For detergent and fabric softener)
Door
Lower cover
Adjustable leg
Power Plug
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agents
order to avoid a hazard.
Control Panel
Drum
Drain Pump Filter
Drain Plug
Lower Cover Cap
59kg / 2100W
7.0kg : [FH0B8QDL2 / FH0B8QDL22]
7.5kg : [FH4B8EDL21 / FH2B8EDL21 / FH296EDL24] [FH0B8EDL2 / FH0B8EDL21 / FH296EDL23]
8.0kg : [FH496TDL23 / FH496TDL24]
No Spin/400/800/1000 [FH0B8QDL2 / FH0B8QDL22 / FH0B8EDL2 / FH0B8EDL21]
No Spin/400/800/1200 [FH2B8EDL21 / FH296EDL24 / FH296EDL23] No Spin/400/800/1400 [FH4B8EDL21 / FH496TDL23 / FH496TDL24]
o
carpeted floor.
subjected
in
caused
Machine.
5
adjustable legs
It is advisable to avoid, the usage of trolley & the movement of Washing Machine after installation. As it may disturb the levelling of washer, which can create excessive noise & vibration.
6
(1.0~10kgf/cm²)
Part can be different according to different models.
Tw o rubber seals are provided w ith inlet hose connectors.
These are used to prevent w ater leakage.
Make sure the connection to tap is sufficiently tight.
C heck rubber seals in inlet hose |
Screw the hose connector onto |
connectors. |
w ater supply tap. |
Hose |
|
Connector |
|
Rubber seal
Loading...