La Crosse Technology WS-9133 User Manual
WIRELESS 915 MHz WEATHER STATION
g
Contents
Language Pages
Instruction Manual
English 1
French 22
Spanish 43
TABLE OF CONTENTS
Topic Page
Inventory of Contents 2
Features 3
Setting Up 4
Battery Installation 5
Function keys6
LCD Screen and Settings8
Manual Settings9
Alarm setting and snooze 11
Weather forecast icons and tendency 11
Indoor temperature and MIN/MAX records 14
Outdoor temperature and MIN/MAX records 14
Resetting MIN/MAX records 14
915 MHz Reception 15
Mountin
Care and Maintenance 17
Specifications 18
Warranty Information 19
INVENTORY OF CONTENTS
1. Wireless Temperature Station
2. Wireless Temperature Sensor (TX37U-IT) and mounting bracket
3. Instruction Manual
16
This product offers:
FEATURES:
The Weather station
Battery
compartment
Function
keys
1
INSTANT TRANSMISSION is the state-of-the-art
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an im m ed iate
update (every 4 seconds!) of all your outdoor
data measured from the transmitters: follow
your climatic variations in real-time!
Foldout stand
Hanging hole
Battery
compartment
cover
Time display (hour and minutes)
12/24 hour display Alarm function with snooze
Temperature display in degree Farenheit (ºF) or Celsius (°C)
Indoor and outdoor temperature with MIN/MAX records
Manual reset of MIN/MAX records
Weather forecast with weather tendency indicator
Wireless transmission at 915 MHz
Signal reception intervals at 4 seconds
Low battery indicator
Wall mounting or table standing (foldout stand)
The Outdoor Temperature Transmitter
SETTING UP:
Note:
This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see “Install
and replace batteries in the Temperature transmitter“).
2. Immediately after and within 30 seconds, insert the batteries into
Weather station (see “Install and replace batteries in the Weather
station”). Once the batteries are in place, all segments of the LCD will
Remote transmission of outdoor temperature to
Rain resistant casing
Wall mounting and table-stan ding
2
Temperature Station by 915 MHz signals
3
4
light up briefly. Following the time as 12:00 and the weather icon will be
y
A
y
r
r
r
y
r
y
r
r
displayed. If these are not displayed after 60 seconds, remove the
batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data
from the transmitter. The outdoor temperature and the signal reception
icon should then be displayed on the Weather stat ion. If this does not
happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this should
under good conditions be a distance no more than 100 meters (330
feet) between the final position of the Weather Station and the
transmitter (see notes on “Mounting” and “915 MHz Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
STATION
The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries
will need to be replaced, the
low battery icon will appear on
the LCD. To install and replace
the batteries, please follow the
steps below:
1. Lift up the battery
compartment cove r.
2. Insert batteries observing
the correct polarity (see
marking).
3. Replace compartment
cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
Note:
In the event of changing batteries in any of the units, all units need to be reset
by following the setting up procedures. This is because a security code is
assigned by the transmitter at start-up and this code must be received and
stored by the Weather station in the first 3 minutes of po wer being supplied to
it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure
optimum accuracy of these units (Battery life See Specifications below).
FUNCTION KEYS:
Weather station:
The weather station has four easy to use function keys.
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
The Temperature Transmitter uses 2 x AA, IEC LR6,
1.5V battery. To install and replace the batteries,
please follow the steps below:
1. Remove the battery compartment cover at the
back of the transmitter.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery compartment cover on the
unit.
+ ke
5
LARM key
MIN/MAX RESET key
SET key
Press the key to enter manual setting modes: time, 12/24 hour ti me
Stop the alarm
+ key
To make adjustment for various settings
Stop the alarm
ALARM key
Enter the alarm setting mode
Switch the alarm ON/ OFF
Stop the alarm
MIN/MAX RESET key
Press and hold to reset the MIN/MAX temperature records
Activate the snooze
Exit manual setting modes
SET ke
display, and temperature unit (ºC/ºF) setting
LCD SCREEN AND SETTINGS:
Alarm icon
* When the outdoor signal is successfully received by the Weather Station,
this icon will be switched on. (If not successful, the icon will not be shown in
LCD) So user can easily see whether the last reception was successful (icon
on) or not (icon off).
For a better display clarity, the LCD screen is split int o 3 sections.
Section 1 - TIME AND ALARM
Display of time
Weathe
tendenc
indicato
Low batter
indicato
(weathe
station)
Indoo
Temperature
in °C/ °F
MIN/MAX indoo
temperature
6
Time
Weather
forecast icon
Low batter y
indicator
(transmitter)
Outdoor
Reception
Signal icon*
Outdoor
Temperature
in °C/ °F
MIN/MAX outdoor
temperature
7
8
Loading...