Service Bulletin
SB Number:
Subject:
Model:
Phenomenon The image may appear faint on the print-out.
Cause Contact failure between the Developer bias terminal and the Developer unit may occur.
Solution The Spacer contact bias has been afxed to the Developer bias terminal.
Developer contact
SB 2LW-015
Faint image due to Developer bias failure
FS-3040MFP/3140MFP/3040MFP+/3140MFP/3540MFP/3640MFP
Creation Date: 16/12/2011
0.5mm
Added
spacer
No protrusion
No protrusion
0.5mm
Contact bias (302F902270)
Spacer contact bias specications
13mm
0.5mm
6.5mm
Serial numbers of affected machines
Type Serial number
FS-3040MFP/3140MFP/3040MFP+/3540MFP Not available
FS-3140MFP+ NNP1X04250
FS-3640MFP NNG1X03523
The above mentioned changes have been applied to machines produced after the above mentioned serial numbers.
KMIS Service Department, Kyocera Mita Europe B363 / SB 2LW-015
Page 1 of 1