Kyocera FS-3040P, FS-3540, FS-3040, FS-3140P, FS-3640MFP Service Bulletin 2LW 016
...
Service Bulletin
SB Number:
Subject:
SB 2LW-016
Failure to install the Main charger unit at the Drum unit frame
Creation Date: 02/02/2012
Model: FS-3040MFP/3140MFP/3040MFP+/3140MFP+/3540MFP/3640MFP
Phenomenon The Service parts Main charger unit can not be installed at the Drum unit frame.
Cause The Hook of the Main charger unit may be deformed due to pressure in the Vacuum pack of
the Packing material.
Solution The Packing material has been changed as follows:
1. A part of the Cardboard has been removed.
2. A Spacer has been added to the inner side of the hook
Regular condition Deformed hook
Part of the Cardboard has been removed Spacer has been added to the inner side of the hook
KMIS Service Department, Kyocera Mita Europe B425 / SB 2LW-016
Page 1 of 2
Service Bulletin
Classication
Field measure When the above mentioned phenomenon occurs, please replace the Main charger unit with the
Parts
No. Old Parts
No.
1 302J093092
2J093092
Entire stock rework
latest type.
New Parts
No.
302J093093
2J093093
In-eld modication at next visit
Description Q’TY Interchange-
MC-320 1 1 X O
In-eld modication by case
X
No modication necessary
ability
Old New Old New
KMIS Service Department, Kyocera Mita Europe B425 / SB 2LW-016
Page 2 of 2
Loading...