Kyocera FS-3040P, FS-3540, FS-3040, FS-3140P, FS-3640MFP Service Bulletin 2LW 014

...
Service Bulletin
SB Number:
Subject:
SB 2LW-014
Firmware upgrade (Engine v005.002/Scanner v003.001)
Creation Date: 06/12/2011
Item Contents
“Toner low“ message after installing the Toner container.
Firmware for the FS-3040MFP/3140MFP
Type Program No. Check SUM Version Status Date Applicable model(s)
ENGINE 2LW_1000005002 A1EC 005.002 19/10/2011 FS-3040MFP/3140MFP
MAIN 2LW_2F00008003 ---- 008.003 ---------- FS-3040MFP
MAIN 2LX_2F00008003 ---- 008.003 ---------- FS-3140MFP
SCANNER 2LW_1200002001 ---- 002.001 10/06/2011 FS-3040MFP/3140MFP
FAX BOOT/APL 2H9_5500008001 ---- 008.001 ---------- FS-3140MFP
Phenomenon The message “Toner low” may appear after installing the Toner container.
Cause “Toner low” may be incorrectly indicated if the toner inside the Developer unit is
unevenly distributed.
Solution The condition when the message “Toner low” is indicated, has been changed.
Note: Please upgrade all the rmware at the same time.
Firmware for the FS-3040MFP+/3140MFP+
Type Program No. Check SUM Version Status Date Applicable model(s)
ENGINE 2LW_1000005002 A1EC 005.002 19/10/2011 FS-3040MFP+/3140MFP+
MAIN 2MF_2F00003009 ---- 003.009 ---------- FS-3040MFP+
MAIN 2MG_2F00003009 ---- 003.009 ---------- FS-3140MFP+
SCANNER 2LW_1200002001 ---- 002.001 10/06/2011 FS-3040MFP+/3140MFP+
FAX BOOT/APL 2H9_5500008001 ---- 008.001 ---------- FS-3140MFP+
Note: Please upgrade all the rmware at the same time.
Firmware for the FS-3540MFP/3640MFP
Type Program No. Check SUM Version Status Date Applicable model(s)
ENGINE 2MC_1000003002 83E0 003.002 14/10/2011 FS-3540MFP/3640MFP
MAIN 2MC_2F00003024 ---- 003.024 ---------- FS-3540MFP
MAIN 2MD_2F00003024 ---- 003.024 ---------- FS-3640MFP
SCANNER 2MC_1200003001 A087 003.001 10/08/2011 FS-3540MFP/3640MFP
MMI 2MC_7000003020 ---- 003.020 ---------- FS-3540MFP/3640MFP
FAX BOOT/APL 2KX_5500007001 ---- 007.001 ---------- FS-3640MFP
Note: Please upgrade all the rmware at the same time.
KMIS Service Department, Kyocera Mita Europe B379-B409-B410 / SB 2LW-014
Page 1 of 2
Service Bulletin
Classication
Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest
Serial numbers of affected machines
Type Applicable rmware Serial number
FS-3040MFP/3140MFP/3040MFP+/3140MFP+ Engine November 2011 production.
FS-350MFP/3640MFP Engine October 2011 production.
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Entire stock rework
version.
In-eld modication at next visit
In-eld modication by case
X
No modication necessary
KMIS Service Department, Kyocera Mita Europe B379-B409-B410 / SB 2LW-014
Page 2 of 2
Loading...