Kyocera FS-3040P, FS-3140P Service Bulletin 2MF 002

Service Bulletin

SB Number:

Subject:

SB 2MF-002

Firmware upgrade (Main v007.002)

Creation Date: 28/02/2012

Model: FS-3040MFP+/3140MFP+

Contents of changes

1 The Print speed has been improved.

2 If the Command Center message in an optional language is stored on the Hard disk, it may not be correctly

indicated during sleep mode.

3 The following KPDL errors may occur when printing PDF data directly from the Machine:

• /undenedresult, Offending Command: --show--

• /invalidrestore, Offending Command: --restore--

• /syntaxerror

4 Polish characters may appear garbled on the print-out, when printing PDF data directly from the Machine.

5 Characters may be partially skipped, when printing PDF data directly from the Machine.

6 Code39 barcodes may be skipped, when printing PDF data directly from the Machine.

7 Print-out may fail and “PDFConversionError” report may be printed, when printing PDF data directly from the

Machine.

8 Incorrect characters may be printed in a large font, when printing PDF data directly from the Machine.

9 Characters may appear garbled, when printing PDF data directly from the Machine.

10 KPDL error may occur, when printing KPDL or PDF data.

11 “Processing” lock-up may occur, when printing PDF data from the Mac OS 10.6 preview.

12 Error code CF248 may occur, when printing.

13 If the Character codes 0x21, 0x52 and 0x21 (!R!) exist in series in the PCL5 data, Prescribe mode is

unintentionally entered and no data is printed afterwards.

14 LF code may be ignored during SMB protocol printing.

15 The Image may appear incorrectly on the print-out, if the KYOmulticode CF card is inserted.

16 The Command Center settings may not be changed.

Firmware

Type Program No. Check SUM Version Status Date Applicable model(s)

MAIN 2MF_2F00004002 ---- 004.002 17/10/2011 FS-3040MFP+

MAIN 2MG_2F00004002 ---- 004.002 17/10/2011 FS-3140MFP+

ENGINE 2LW_1000005002 A1EC 005.002 ---------- FS-3140MFP+/3140MFP+

SCANNER 2MG_1200001015 ---- 001.015 ---------- FS-3040MFP+/3140MFP+

FAX BOOT/APL 2H9_5500007002 ---- 007.002 ---------- FS-3140MFP+

Note: Please upgrade all the rmware at the same time.

Classication

Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest

Serial numbers of affected machines

Type Serial number

FS-3040MFP+/3140MFP+ Planned from December 2011 production*.

The above is the plan at the present moment. Please note that there is a possibility of change after giving this

information.

KMIS Service Department, Kyocera Mita Europe B461 / SB 2MF-002

Entire stock rework

version.

In-eld modication at next visit

Page 1 of 1

In-eld modication by case

X

No modication necessary