KitchenAid KBFS22ECWH, KBFS20ECMS, KBFS20ECBL, KBFS25ECWH, KBFS20ECWH Dimension Guide

	Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS		PRODUCT DIMENSIONS
KBFS20EC	KBFS25EC
KBFS22EC
Electrical: A 115-volt, 60-Hz, AC-only, 15or		H
20-amp fused, grounded electrical supply is
required. It is recommended that a separate		G
circuit serving only your refrigerator be		cabinet		I
provided. Use an outlet that cannot be turned
		F
off by a switch. Do not use an extension				C
		not incl.
cord.
		handle
NOTE: Before performing any type of
installation, cleaning, or removing a light		E	90˚	90˚
bulb, turn the control (Thermostat,		incl.	A
Refrigerator or Freezer Control depending on		handle	overall
the model) to OFF and then disconnect the		B
refrigerator from the electrical source. When		top of
you are finished, reconnect the refrigerator to		cabinet
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”

Water: A cold water supply with water

pressure between 35 and 120 psi (241 and D 827 kPa) is required to operate the ice maker

and water dispenser. If you have questions about your water pressure, call a licensed, qualified plumber.

IMPORTANT: The pressure of the water

coming out of a reverse osmosis system

going to the water inlet valve of the

Height -

Depth -

Depth -

Depth -

Depth -

Depth -

Width -

refrigerator needs to be between 35 and

Model

Height -

Top of

Doors Open

Drawer

With

Without

Cabinet

Width -

Door Open

120 psi (241 and 827 kPa).

Number/

Overall

Cabinet

90°

Open

Handles

Handles

Only

Cabinet

90°

Reverse Osmosis Water Supply: If a

Size

“A”

“B”

“C”

“D”

“E”

“F”

“G”

“H”

“I”

KBFS20EC

701⁄8"

68¹⁄ "

43"

44¹⁄ "

29³⁄ "

28"

24¹⁄ "

355⁄8"

39³⁄ "

reverse osmosis water filtration system is

connected to your cold water supply, the

20.0 cu. ft.

(178.1 cm)

(174.0 cm)

(109.2 cm)

(113 cm)

(74.6 cm)

(71.1 cm)

(61.3 cm)

(90.5 cm)

(100 cm)

water pressure to the reverse osmosis

KBFS22EC

701⁄8"

6813⁄16"

47¹⁄ "

52¹⁄ "

34 ⁄ "

31¹ ⁄ "

28¹⁄ "

32 ⁄ "

39³⁄ "

system needs to be a minimum of 40 to

(21.7 cu. ft.)

(178.1 cm)

(174.8 cm)

(119.5 cm)

(132.2 cm)

(87.5 cm)

(81.1 cm)

(71.4 cm)

(82.9 cm)

(100 cm)

60 psi (276 to 414 kPa).

KBFS25EC

701⁄8"

6813⁄16"

48¹⁄ "

53¹⁄ "

35 ⁄ "

32¹ ⁄ "

29¹⁄ "

35 ⁄ "

39³⁄ "

(24.8 cu. ft.)

(178.1 cm)

(174.8 cm)

(122.1 cm)

(135 cm)

(90 cm)

(83.7 cm)

(74 cm)

(90.5 cm)

(100 cm)

LOCATION REQUIREMENTS

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

If you are installing your refrigerator next to a fixed wall, leave 21⁄2" (6.3 cm)

¹⁄" (1.25 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

2¹⁄" (6.3 cm)

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10635370A
Instructions packed with product. Specifications subject to change without notice.	6/27/14