BOTTOM-MOUNT REFRIGERATOR
Use&CareGuide
For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230
or visit our website at www.kitchenaid.com
In Canada, call: 1-800-807-6777 or visit our website at www.KitchenAid.ca
RÉFRIGÉRATEUR SUPERPOSÉ
Guided’utilisationetd’entretien
Au Canada, pour assistance, installation ou service composez le 1-800-807-6777 ou visitez notre site web à www.KitchenAid.ca
Table of Contents/Table des matières ............................................................................. |
2 |
12828135 / 2300263
TABLE OF CONTENTS
REFRIGERATOR SAFETY ............................................................. |
3 |
Proper Disposal of Your Old Refrigerator.................................... |
3 |
INSTALLATION INSTRUCTIONS .................................................. |
4 |
Unpack the Refrigerator............................................................... |
4 |
Location Requirements................................................................ |
4 |
Electrical Requirements ............................................................... |
5 |
Water Supply Requirements........................................................ |
5 |
Connect the Water Supply........................................................... |
5 |
Base Grille .................................................................................... |
6 |
Refrigerator Doors........................................................................ |
6 |
Freezer Drawer............................................................................. |
7 |
Adjust the Door ............................................................................ |
9 |
Water System Preparation........................................................... |
9 |
Normal Sounds .......................................................................... |
10 |
REFRIGERATOR USE .................................................................. |
10 |
Opening and Closing Doors....................................................... |
10 |
Ensuring Proper Air Circulation.................................................. |
11 |
Using the Controls ..................................................................... |
11 |
Water Dispenser......................................................................... |
13 |
Water Filter Status Light............................................................. |
13 |
Water Filtration System.............................................................. |
13 |
Ice Maker.................................................................................... |
13 |
REFRIGERATOR FEATURES ...................................................... |
14 |
Refrigerator Shelves................................................................... |
14 |
Crisper and Crisper Cover ......................................................... |
14 |
Crisper Humidity Control............................................................ |
15 |
Temperature-Controlled Drawer ................................................ |
15 |
Utility or Egg Bin......................................................................... |
15 |
FREEZER FEATURES .................................................................. |
16 |
Freezer Baskets.......................................................................... |
16 |
DOOR FEATURES ........................................................................ |
16 |
Door Retainer ............................................................................. |
16 |
Door Bins.................................................................................... |
16 |
Utility Compartment ................................................................... |
16 |
REFRIGERATOR CARE ............................................................... |
16 |
Cleaning...................................................................................... |
16 |
Changing the Light Bulb............................................................. |
17 |
Power Interruptions.................................................................... |
17 |
Vacation and Moving Care......................................................... |
18 |
TROUBLESHOOTING .................................................................. |
18 |
ASSISTANCE OR SERVICE ......................................................... |
20 |
In the U.S.A. ............................................................................... |
20 |
In Canada ................................................................................... |
21 |
Accessories ................................................................................ |
21 |
WATER FILTER CERTIFICATIONS............................................. |
21 |
PRODUCT DATA SHEETS........................................................... |
22 |
WARRANTY .................................................................................. |
23 |
TABLE DES MATIÈRES
SÉCURITÉ DU RÉFRIGÉRATEUR .............................................. |
24 |
Mise au rebut de votre vieux réfrigérateur................................. |
24 |
INSTRUCTIONS D’INSTALLATION ........................................... |
25 |
Déballage du réfrigérateur ......................................................... |
25 |
Emplacement d’installation........................................................ |
25 |
Spécifications électriques .......................................................... |
26 |
Spécifications de l’alimentation en eau ..................................... |
26 |
Raccordement de la canalisation d'eau .................................... |
26 |
Grille de la base.......................................................................... |
28 |
Portes du réfrigérateur ............................................................... |
28 |
Tiroir du congélateur .................................................................. |
29 |
Ajustement de la porte............................................................... |
31 |
Préparation du système d’eau................................................... |
31 |
Sons normaux ............................................................................ |
32 |
UTILISATION DU RÉFRIGÉRATEUR.......................................... |
32 |
Ouverture et fermeture des portes ............................................ |
32 |
Pour s’assurer d’une circulation d’air appropriée ..................... |
33 |
Utilisation des commandes........................................................ |
33 |
Distributeur d’eau....................................................................... |
35 |
Témoins lumineux de l'état du filtre à eau................................. |
35 |
Système de filtration d’eau intérieur .......................................... |
36 |
Machine à glaçons ..................................................................... |
36 |
CARACTÉRISTIQUES DU RÉFRIGÉRATEUR ........................... |
37 |
Tablettes du réfrigérateur........................................................... |
37 |
Bac à légumes et couvercle....................................................... |
37 |
Réglage de l’humidité dans le bac à légumes........................... |
38 |
Tiroir à température contrôlée.................................................... |
38 |
Casier utilitaire ou oeufrier.......................................................... |
39 |
CARACTÉRISTIQUES DU CONGÉLATEUR............................... |
39 |
Paniers de congélateur .............................................................. |
39 |
CARACTÉRISTIQUES DE LA PORTE......................................... |
39 |
Dispositif de retenue de la porte................................................ |
39 |
Balconnets dans la porte ........................................................... |
39 |
Compartiment utilitaire............................................................... |
39 |
ENTRETIEN DU RÉFRIGÉRATEUR ............................................ |
40 |
Nettoyage ................................................................................... |
40 |
Remplacement de l’ampoule d’éclairage .................................. |
40 |
Pannes de courant ..................................................................... |
41 |
Entretien avant les vacances ou lors d’un déménagement....... |
41 |
DÉPANNAGE................................................................................. |
42 |
ASSISTANCE OU SERVICE......................................................... |
45 |
Accessoires ................................................................................ |
45 |
FEUILLES DE DONNÉES SUR LE PRODUIT............................. |
46 |
GARANTIE..................................................................................... |
47 |
2
REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
■ Use nonflammable cleaner.
■ Keep flammable materials and vapors, such as gasoline, away from refrigerator.
■ Use two or more people to move and install refrigerator.
■ Disconnect power before installing ice maker (on ice maker kit ready models only).
■ Use a sturdy glass when dispensing ice or water (on some models).
SAVE THESE INSTRUCTIONS
Proper Disposal ofYour Old Refrigerator
Before You Throw Away Your Old Refrigerator or Freezer:
■Take off the doors.
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous
– even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
■Leave the shelves in place so that children may not easily climb inside.
3
INSTALLATION INSTRUCTIONS
UnpacktheRefrigerator
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
■Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”
■Properly dispose of packaging.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.
Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.
Clean Before Using
After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.
LocationRequirements
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
■Your refrigerator is designed for indoor, household use only.
■To ensure proper ventilation for your refrigerator, allow for a ¹⁄ " (1.25 cm) space at the top and behind the refrigerator.
■If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
■When installing your refrigerator next to a fixed wall, leave 2¹⁄ " (5.4 cm) minimum on each side (depending on your model) to allow for the door to swing open.
NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).
¹⁄ " (1.25 cm)
2¹⁄ " (5.4 cm)
4
ElectricalRequirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.
Water Supply Requirements
Read all directions before you begin.
IMPORTANT:
■If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.
■All installations must meet local plumbing code requirements.
■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.
TOOLS NEEDED: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Flat-blade screwdriver, ⁄ " and ¹⁄ " open-end wrenches or two adjustable wrenches, ¹⁄ " nut driver and drill bit, hand drill or electric drill (properly grounded).
NOTE: Your refrigerator dealer has a kit available with a ¹⁄ " (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄ " (4.76 mm) saddle valve which reduces water flow and clogs more easily.
Water Pressure
A cold water supply with water pressure of between 35 and
100 psi (241689 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 100 psi (241689 kPa).
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 - 414 kPa).
If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 - 414 kPa):
■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
■Allow the storage tank on the reverse osmosis system to refill after heavy usage.
■If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”
If you have questions about your water pressure, call a licensed, qualified plumber.
ConnecttheWaterSupply
Connect to Water Line
1.Unplug refrigerator or disconnect power.
2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.
3.Find a ¹⁄ " to 1¹⁄ " (12.7 mm to 3.18 mm) vertical cold water pipe near the refrigerator.
IMPORTANT:
■Make sure it is a cold water pipe.
■Horizontal pipe will work, but the following procedure must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.
4.To determine the length of copper tubing you will need, measure from connection on lower right rear of refrigerator to water pipe. Add 7 ft (2.1 m) to allow for moving refrigerator for cleaning. Use ¹⁄ " (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.
5.Using a grounded drill, drill a ¹⁄ " hole in the cold water pipe you have selected.
|
A |
|
B |
|
C |
|
D |
|
E |
|
F |
|
G |
A. Cold water pipe |
E. Compression sleeve |
B. Pipe clamp |
F. Shutoff valve |
C. Copper tubing |
G. Packing nut |
D. Compression nut |
|
5
6.Fasten shutoff valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the ¹⁄" drilled hole in the water pipe and that rubber washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws slowly and evenly so rubber washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.
7.Slip compression sleeve and compression nut on copper tubing as shown. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.
8.Place the free end of the tubing into a bucket or sink. Turn ON main water supply and flush out tubing until water is clear. Turn OFF shutoff valve on the water pipe. Check for leaks. Coil copper tubing.
Connect to Refrigerator
1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.
2.Create a service loop using extreme care to avoid kinks. Secure copper tubing to refrigerator cabinet with a “P” clamp.
A
B
C
D
E
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Plug in refrigerator or reconnect power.
BaseGrille
Remove the Base Grille
1.Grasp the grille with both hands.
2.Pull the grille toward you.
Replace the Base Grille
1.See the markings on the inside of the base grille for proper placement.
2.Align the grille mounting clips with the cabinet slots.
3.Push the grille firmly into the cabinet slots until it snaps into place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. Copper tubing |
D. Compression sleeve |
|||||
B. “P” clamp |
E. Water valve inlet port |
|||||
C.Compression nut
3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.
RefrigeratorDoors
Graphics are included later in this section.
Remove and Replace Handles
1.Using a ³⁄" Allen wrench, loosen the two set screws located on the side of each handle. See Graphics 1 and 2.
2.Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles.
3.To replace the handles, reverse the directions.
6
Remove Doors and Hinges
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
IMPORTANT:
■Remove food and any adjustable door or utility bins from doors.
■All graphics referenced in the following instructions are included later in this section after “Final Steps.”
TOOLS NEEDED: ⁄", ³⁄", ¹⁄" hex-head socket wrench, #2 Phillips screwdriver, and a flat-blade screwdriver.
1.Unplug refrigerator or disconnect power.
2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.
NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.
3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.
4.Remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.
5.Before removing the left-hand side door, disconnect the wire harness located on top of the top hinge by wedging a flatblade screwdriver or your fingernail between the two sections. See Wire Harness graphic.
NOTE: The green, ground wire remains attached to the hinge.
6.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.
7.Remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.
Replace Doors and Hinges
1.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten the screws completely.
2.Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door.
NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.
3.Align the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.
4.Reconnect the wire harness on top of the left-hand side refrigerator door.
5.Replace the top hinge covers.
FreezerDrawer
Graphics are included later in this section.
Remove Drawer
IMPORTANT: Two people may be required to complete this procedure.
1.Open the freezer drawer to full extension.
2.Remove all articles from baskets.
3.Pull the upper wire basket out to full extension and lift out to remove.
4.Lift lower basket straight up and out to remove.
5.Remove the basket cradles from the drawer rails. Push the snap attachments inward away from the drawer rails to unlatch the basket cradles. Lift the basket cradles off the drawer rails.
A
B
A.Cradle snap attachment
B.Basket cradle
6.Lift the top of the freezer drawer front to unhook supports from drawer rails. Lift drawer out.
Replace Drawer
IMPORTANT: Two people may be required to complete this procedure.
1.Pull both drawer rails out to full extension.
2.Locate the notches on the inside of each drawer rail. See Graphic 3-1.
3.While supporting the drawer front, hook the drawer supports into the notches on the inside of the drawer rails. Lower the drawer front into its final position. See Graphic 3-2.
4.Place the basket cradles back on the drawer rails. Align the snap attachments with the slots on the drawer rails, and press each snap toward the rail until it clicks.
5.With drawer rails pulled out to full extension, set the lower basket straight down into the basket cradles.
6.Slide the upper basket into the molded drawer rail. Make sure the rear of the basket hooks behind the drawer rail stop.
Final Steps
1.Plug in refrigerator or reconnect power.
2.Return all removable door parts to doors and food to refrigerator.
7
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Door Removal & Replacement
Top Hinges
A
B
C
D
A.Hinge Cover Screw
B.Top Hinge Cover
C.5/16" Hex-Head Hinge Screws
D.Top Hinge
Bottom Hinges |
|
A |
1 |
|
|
B |
|
C |
|
A. Shim |
|
B. Bottom Hinge |
|
C. Hinge Screws |
|
Wire Harness |
2 |
|
|
|
A |
|
A |
A. 3/32" Set Screw |
A. 3/32" Set Screw |
Drawer Removal & Replacement
3-1 |
3-2 |
8
AdjusttheDoor
Depending on your model, your refrigerator may have two (Style 1) or four (Style 2) adjustable rollers located at the base of the refrigerator. If your refrigerator seems unsteady or you want the door to close easier, adjust the refrigerator's tilt using the instructions below.
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
1.Move the refrigerator into its final location.
2.Remove the base grille. Grasp the grille firmly and pull it toward you.
3.Remove the bracket covers. Insert the eraser end of a pencil in the cover notch. Apply slight downward pressure to the notched side of the cover while swinging it off.
4.Using a screwdriver or ³⁄" hex driver, turn the roller adjustment screw(s) on each side to raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the refrigerator takes some weight off the adjustment screws and rollers. This makes it easier to turn the screws.
■To raise, turn the roller adjustment screw to the right.
■To lower, turn the roller adjustment screw to the left.
NOTE: It may take several turns of the roller adjustment screw to adjust the tilt of the refrigerator.
Style 1 - Front leveling
A 
B
A.Roller adjustment screw
B.Stabilizing foot
Style 2 - Front and rear leveling
A B B A
C C
A.Front adjustment screw
B.Rear adjustment screw
C.Stabilizing foot
5.Open the door again to make sure that it closes as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both front adjustment screws to the right. It may take several more turns, and you should turn both adjustment screws the same amount.
6.Lower the stabilizing foot by turning it clockwise until it is firmly against floor.
7.Turn the front adjustment screws counterclockwise to allow the full weight of the refrigerator to rest on the stabilizing feet.
8.Replace the bracket covers. Place each bracket cover into the outer edge, swing the cover toward the cabinet and snap it into place.
9.Replace the base grille.
WaterSystemPreparation
Please read before using the water system.
Immediately after installation, follow the steps below to make sure that the water system is properly flushed.
1.Turn off the ice maker by opening the freezer door and lifting up the wire shutoff arm as shown.
9
2.Install the interior water filter. The interior water filter mounting bracket is located on the left side wall of the refrigerator compartment.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
■Remove blue bypass cap and retain for later use.
■Carefully remove the interior water filter from its packaging. Remove the sealing label from the end of the filter and insert it into the filter head.
■Gently rotate the filter clockwise until it stops. Then snap the filter cover closed.
3.Flush the water system by dispensing and discarding 2 to 3 gal. (8 to 12 L) of water. Flushing the system will take approximately 6 to 7 minutes and will help clear air from the
line. Additional flushing may be required in some households.
NOTE: As air is cleared from the system, water may spurt out of the dispenser.
4.Inspect the filter system for water leaks. If you see water leaks, see the “Troubleshooting” section.
5.Turn on the ice maker by opening the freezer door and lowering the wire shutoff arm as shown. Please refer to the “Ice Maker” section for further instructions on the operation of your ice maker.
■Allow 24 hours to produce the first batch of ice.
■Discard the first three batches of ice produced.
NormalSounds
Your new refrigerator may make sounds that your old one didn’t make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, such as the floor, walls, and cabinets, can make the sounds seem louder. The following describes the kinds of sounds and what may be making them.
■If your refrigerator is equipped with an ice maker, you will hear a buzzing sound when the water valve opens to fill the ice maker for each cycle.
■Your refrigerator is designed to run more efficiently, to keep your food items at the desired temperatures and to minimize energy usage. The high efficiency compressor and fans may cause your refrigerator to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.
■You may hear the evaporator fan motor circulating air through the refrigerator and freezer compartments. The fan speed may increase as you open the doors or add warm food.
■Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator.
■Water dripping on the defrost heater during a defrost cycle may cause a sizzling sound.
■As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator.
■Contraction and expansion of the inside walls may cause a popping noise.
■You may hear air being forced over the condenser by the condenser fan.
■You may hear water running into the drain pan during the defrost cycle.
REFRIGERATOR USE
OpeningandClosingDoors
There are two refrigerator compartment doors. The doors can be opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
■When the left side door is opened, the hinged seal automatically folds inward so that it is out of the way.
■When both doors are closed, the hinged seal automatically forms a seal between the two doors.
A
A. Hinged seal
10
EnsuringProperAirCirculation
In order to ensure proper temperatures, you need to permit airflow between the refrigerator and freezer sections. As shown in the illustration, cool air enters the freezer section through vents in the rear and top. The air flows forward through the freezer section and recirculates under the freezer floor. Cool air enters the refrigerator section through the top, flows down and across shelves to the doors and recirculates to return air vents at the bottom.
Do not block any of these vents with food packages. If the vents are blocked, airflow will be prevented and temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly.
UsingtheControls
The control center is located at the top front of the refrigerator compartment.
Temperature Controls
For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended set points as shown.
Recommended Settings
IMPORTANT:
■When the power is on, the temperature display shows the actual temperature of the compartment.
■Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature controls to a colder than recommended setting will not cool the compartments any faster.
■The recommended settings should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. See “Ensuring Proper Air Circulation.”
To Turn Your Refrigerator Off/On:
■Press the freezer (+) touch pad repeatedly until “OFF” appears in the freezer display. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool.
■Press either the refrigerator or freezer (-) touch pad to turn on the refrigerator.
Adjusting Controls
The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.
If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.
To Adjust Set Point Temperatures:
The first touch of the (+) or (-) touch pad displays the current temperature set point. The display will show the set point for approximately 3 seconds, and then return to the actual temperature.
■Press the (+) or (-) touch pads until the desired temperature set point is displayed.
NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours for the temperature to stabilize between adjustments.
|
|
|
|
|
|
|
|
CONDITION/REASON: |
ADJUSTMENT: |
||
|
|
|
|
REFRIGERATOR too warm |
Adjust REFRIGERATOR |
||
- Door opened often, large amount |
TEMPERATURE Control |
||
1° lower |
|||
of food added or room |
|||
|
|||
temperature very warm |
|
||
|
|
|
|
FREEZER too warm/ice not made |
Adjust FREEZER |
||
fast enough |
TEMPERATURE Control |
||
- Door opened often, or large |
1° lower |
||
|
|||
amount of food added or very cold |
|
||
room temperature (can’t cycle |
|
||
often enough) |
|
||
- Heavy ice usage |
|
||
|
|
|
|
REFRIGERATOR too cold |
Adjust REFRIGERATOR |
||
- Controls not set correctly for |
TEMPERATURE Control |
||
1° higher |
|||
your conditions |
|||
|
|||
|
|
|
|
FREEZER too cold |
Adjust FREEZER |
||
- Controls not set correctly for |
TEMPERATURE Control |
||
1° higher |
|||
your conditions |
|||
|
|||
|
|
|
|
11
Additional Control Center Features
Max Cool
The max cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.
■Press the Max Cool touch pad to set the freezer and refrigerator to the lowest temperature settings. Press the Max Cool touch pad again to return to the normal refrigerator set point.
NOTE: The Max Cool feature will automatically shut off in approximately 12 hours.
OptimIce® Feature
The OptimIce® feature assists with temporary periods of heavy ice use by increasing ice production.
■Press the OptimIce® feature touch pad to set the freezer to the lowest temperature setting. Press the OptimIce® feature touch pad again to return to the normal freezer set point.
NOTE: The OptimIce® feature will automatically shut off in approximately 24 hours.
Holiday Mode
In Holiday Mode, the freezer will not automatically defrost as often to conserve energy.
■Press the Holiday Mode touch pad until the indicator light is lit to turn on this feature. Press the Holiday Mode touch pad again or open the refrigerator door to turn off this feature.
NOTE: The refrigerator door may be opened within 1 hour of setting Holiday Mode without turning off the feature.
Temp Alarm
The Temperature Alarm combines power outage and warm alarm features.
Power Outage
During a power outage, if the temperatures in the refrigerator and freezer compartments exceed normal operating temperatures, the highest temperature reached will be displayed.
■Press the Temp Alarm touch pad until the indicator light is lit, to turn on this feature. Press and hold Temp Alarm for
3 seconds until the indicator light goes off to turn off this feature.
Warm Alarm
An alarm will sound repeatedly if the freezer or refrigerator compartment temperatures exceed normal operating temperatures for an hour or more.
The temperature displays will alternately show the current temperatures and the highest temperatures the compartments reached when the power was out.
■Press the Temp Alarm touch pad once to stop the audible alarm and alternating temperature displays. The Temp Alarm light will continue to flash until the refrigerator temperature stabilizes.
Door Alarm
The Door Alarm feature sounds a chime every few seconds when the refrigerator door has been left open for 5 continuous minutes. The chime will sound until the door is closed or Door Alarm is turned off.
■Press the Door Alarm touch pad to turn this feature on or off. The indicator light will be lit when the Door Alarm feature is on.
Water Filter Status Lights and Filter Reset (on some models)
See “Water Filter Status Lights.”
User Preferences
The control center allows you to set user preferences, if desired.
Temperature Display (F_C)
This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
Sabbath Mode (SAB)
IMPORTANT: This preference does not disable interior lights.
ON - All control panel lights will be disabled.
OFF - All control panel lights will be enabled.
NOTE: Press any touch pad on the control panel to restore the control panel lights.
To Access the User Preferences Menu:
1.Press and hold the Door Alarm touch pad for 3 seconds. The preference name will appear in the Freezer display and the preference status (F or C) or (ON or OFF) will appear in the Refrigerator display.
2.Use the Freezer (+) or (-) touch pads to scroll through the preference names. When the desired preference name is displayed, press the Refrigerator (+) or (-) touch pads to change the preference status.
3.Set your preferences by pressing and holding the Door Alarm touch pad for 3 seconds, or by shutting the refrigerator compartment door.
12
WaterDispenser
(onsomemodels)
If you did not flush the water system when the refrigerator was first installed, dispense water into a container until you draw and discard 2 to 3 gal. (8 to 12 L) or for approximately 6 to 7 minutes after the water begins dispensing. The water you draw and discard rinses the pipes. Allow several hours for the refrigerator to cool down and chill water.
Dispensing Water
1.Hold a container under the dispenser while pressing the button.
2.Release the button to stop dispensing.
NOTE: Dispense enough water every week to maintain a fresh supply.
WaterFilterStatusLight
(onsomemodels)
The water filter status light will help you know when to change the water filter. When the yellow (Order) light is on, it is almost time to change the water filter. When the red (Replace) light is on, a new water filter should be installed. See “Water Filtration System.”
After replacing the water filter, press and hold FILTER RESET for 3 seconds until the Order or Replace light turns off.
WaterFiltrationSystem
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
IMPORTANT:
■The water filter should be replaced when the status light is red (Replace) or earlier if the flow of water to your water dispenser or ice maker decreases noticeably.
■Air trapped in the system may cause water and the water filter to eject. Dispense water for 2 minutes before removing the used water filter.
Replacing the Water Filter
The water filter mounting bracket is located on the right side of the refrigerator compartment.
1.Turn the used water filter counterclockwise until it releases from the filter mounting bracket.
2.Drain water from the water filter into the sink, and discard the used water filter. Wipe up the excess water in the filter cover.
3.Remove the sealing label from the end of the new water filter and insert the water filter into the filter mounting bracket. Gently rotate the water filter clockwise until it stops, and snap the filter cover closed.
4.Flush the water system by dispensing and discarding 2 to 3 gal. (8 to 12 L) of water. Cleaning the system will take approximately 6 to 7 minutes and will help clear air from the
line. Additional flushing may be required in some households.
5.Inspect the water filter system for leaks. If you see water leaks, see “Troubleshooting.”
Using the Dispenser Without a Water Filter
You can use the water dispenser without a water filter, but your water will not be filtered. If you choose this option, replace the water filter with the blue bypass cap.
IceMaker
Turning the Ice Maker On/Off
NOTE: Do not force the wire shutoff arm up or down.
■To turn the ice maker on, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.
■To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.
13
Ice Production Rate
■Normal Ice Production: The ice maker should produce a complete batch of ice every 3 hours. If ice is not being made fast enough, adjust the Freezer Control to a lower (colder) number in steps. Wait 24 hours. If necessary, gradually adjust the Freezer Control to the lowest setting, waiting 24 hours between each adjustment.
■OptimIce Production (on some models): The ice maker should produce approximately 16 to 20 batches of ice in a 24-hour period. If your refrigerator has the OptimIce production feature, press the OptimIce touchpad.
Remember
■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.
■Do not store anything on top of the ice maker or in the ice storage bin.
Shelves and Shelf Frames
To Remove and Replace a Shelf/Shelf Frame:
1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.
2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports.
3.Lower the front of the shelf and check to make sure that the shelf is securely in position.
CrisperandCrisperCover
To Remove and Replace the Crisper(s):
1.Slide crisper(s) straight out to the stop. Lift the front of the crisper(s) and slide out the rest of the way.
2.Replace the crisper(s) by sliding back in fully past the drawer stop.
REFRIGERATOR FEATURES
Your model may have some or all of these features.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.
To Remove the Crisper(s) Cover:
1.Remove crisper(s).
2.Holding the glass insert firmly with one hand, press up in center of glass insert until it rises above the plastic frame. Gently, slide the glass insert forward to remove.
3.Lift the cover frame up and remove it.
RefrigeratorShelves
The shelves in your refrigerator are adjustable to meet your individual storage needs.
Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy.
Slide-out Shelves
■To slide out shelf, gently pull front of shelf toward you.
■To slide in shelf, push shelf in until it stops.
To Replace Crisper(s) Cover:
NOTE: Before reinstalling the cover, make sure the
U-shaped reinforcement bar is reinstalled in the front edge of the crisper cover.
1.Fit back of cover frame into supports on side walls of the refrigerator and lower the front of the cover frame into place.
2.Slide rear of glass insert into cover frame and lower front into place.
14
CrisperHumidityControl
You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.
LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
■Fruit: Wash, let dry and store in refrigerator in plastic bag or crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper, or store in a loosely closed paper bag on a refrigerator shelf.
■Vegetables with skins: Place in plastic bags or plastic container and store in crisper.
HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
■Leafy vegetables: Wash in cold water, drain and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.
HIGH LOW
Temperature-ControlledDrawer
The full-width, temperature-controlled drawer can be used to store large party trays, deli items, or beverages. For storage flexibility the drawer features a divider and an adjustable temperature control.
NOTE: Do not place leafy vegetables in the temperaturecontrolled drawer. Colder temperatures could damage leafy produce.
Drawer Removal and Replacement
Depending on your model, your refrigerator may have one of two drawer styles. Follow the instructions for the appropriate drawer style.
Style 1 - Flat-lid Drawer
To remove the drawer:
1.Pull the drawer out to its full extension.
2.Tilt up the front of the drawer and pull it straight out.
To replace the drawer:
1.Push the metal glide rails to the rear of the refrigerator.
2.Place the drawer onto the glide rails and slide the drawer toward the rear of the refrigerator.
Style 2 - Lift-up-lid Drawer
To remove the drawer:
1.Lift the lid. Pull the drawer out to its full extension.
2.Tilt up the front of the drawer and pull it straight out.
To replace the drawer:
1.Push the metal glide rails to the rear of the refrigerator.
2.Place the drawer onto the glide rails and slide the drawer toward the rear of the refrigerator.
Drawer Divider
To Remove the Divider:
1.Pull the drawer out to its full extension.
2.Lift the front of the divider to unhook it from the rear wall of the drawer and lift the divider out.
To Replace the Divider:
1.Hook the back of the divider over the rear wall of the drawer.
2.Lower the divider into place.
Drawer Temperature Control
The temperature control, located under the lid on the right-hand side of the drawer, regulates the amount of cold air coming into the drawer.
NOTE: Cold air directed into the drawer can decrease the refrigerator temperature. The refrigerator temperature may need to be adjusted.
■Slide the temperature control to the least cold setting if you want the drawer to be the same temperature as the refrigerator compartment.
■Slide the temperature control to a colder setting when you want the drawer to be colder than the refrigerator compartment.
NOTE: Use the coldest setting when storing meats.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.
Fresh fish or shellfish.................. |
use same day as purchased |
|
Chicken, ground beef, variety meats (liver) |
...............1-2 days |
|
Cold cuts, steaks/roasts ........................................... |
|
3-5 days |
Cured meats............................................................ |
|
7-10 days |
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
UtilityorEggBin
Depending on your model, you may have a one, two or three piece bin. Eggs may be stored in the egg tray or loose in the bin.
NOTE: Store eggs in a covered container for long-term storage. If your model does not have an egg storage bin, store eggs in their original carton on an interior shelf.
15
Loading...