Kenwood DPX-U5140BT User Manual

DPX-U5140BT

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

Pandora® 10

BLUETOOTH® 11

AUDIO SETTINGS 17

DISPLAY SETTINGS 18

TROUBLESHOOTING 19

MORE INFORMATION 21

INSTALLATION / CONNECTION 22

SPECIFICATIONS 24

How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• [

] indicates the selected items.

• (

XX) indicates references are

available on the stated page.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

BASICS

Loading slot Display window

Remote control (RC-406)Faceplate

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

How to replace the battery

Volume knob

(turn/press)

To On the faceplate On the remote control

Turn on the power

Adjust the volume Turn the volume knob. Press

Select a source

Change the display information

Press

• Press and hold to turn off the power.

Press the volume knob during playback to attenuate the sound.

• Press again to cancel.

Press

• Press and hold to scroll the current display information.

Reset button

• Your preset adjustments will also be erased.

repeatedly.

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

or .

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Press SRC repeatedly.

( not available )

ENGLISH

GETTING STARTED

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “CANCELDEMO”

1 Press the volume knob.

[

YES

] is selected for the initial setup.

2 Press the volume knob again.

“DEMOOFF” appears.

Set the clock

Press FNC to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make the settings, then press the knob.

Day

Hour Minute

5 Turn the volume knob to select [ 6 Turn the volume knob to select [ 7 Press and hold to exit.

To return to the previous setting item, press .

“PRESS” “VOLUMEKNOB”

FUNCTION

CLOCK

], then press the knob.

CLOCKADJUST

CLOCKFORMAT 12H

] or [

24H

], then press the knob.

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press FNC to enter [

• Pressing AUDIO enter [

FUNCTION

AUDIO CONTROL

] directly.

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SP SELECT

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

OFF/ 5/4/ 6×9/6/ OEM

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

:Both display and button illumination change to white color when

entering [

FUNCTION

remain as [

COLORSELECT

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ SW1/ SW2).; each preset button, regardless of the selected band.

: Selects according to the speaker size (5inches

].;

OFF

:Both display and button illumination

] color. ( 18)

MIX

:Memorizes one station for

GETTING STARTED RADIO

SYSTEM

KEY BEEP

SOURCE SELECT

PANDORA SRC

BUILT-IN AUX ON

CD READ 1

F/W UPDATE

UPDATE SYSTEM / UPDATE BT

F/W UP xx.xx

CLOCK

CLOCK DISPLAY

:Activates the keypress tone.;

OFF

:Deactivates.

:Enables PANDORA in source selection.;

OFF

:Disables. ( 10)

:Enables AUX in source selection.;

OFF

:Disables. ( 9)

:Automatically distinguishes between audio file disc and music CD.; CD. No sound can be heard if an audio file disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even

when the unit is turned off.;

:Forces to play as a music

OFF

:Cancels.

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly (or press / on RC-406) to select FM1/ FM2/

FM3/ AM/ SW1/ SW2.

3 Press S/T (or press S/ on RC-406) to search for a station.

• To change the searching method for S/T: Press and hold repeatedly. AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or press one of the number buttons (1to6) on RC-406).

Direct Access Tuning (using RC-406)

Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM), “– – – –” (for AM/ SW1) or “– – – – –” (for SW2) appears on the display.

2 Press the number buttons to enter a frequency. 3 Press to search for a station.

• To cancel, press or DIRECT.

• If no operation is done for 10seconds after step canceled.

2, Direct Access Tuning is automatically

ENGLISH

RADIO

Other settings

Press FNC to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

TUNER SETTING

LOCAL SEEK*

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH

:Searches only stations with good reception.;

•

Settings made are applicable only to the selected source/station. Once you change

the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.; NO:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

: The unit will temporarily switch to News Programme if available. ;

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

OFF

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

OFF

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( Selects the available Program Type (see the following), then, press start.

:Cancels.

NORMAL

] is selected for [

ENGLISH/ FRENCH/ GERMAN

OFF

:Cancels.

PRESETTYPE

), then press the knob.

]. ( 4)

OFF

:Cancels.

OFF

: Cancels.

S/T

CLOCK

TIME SYNC

Only for AM/ SW1/ SW2 source.

• [

MONOSET

selectable only when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH : NEWS, AFFAIRS, INFO

MUSIC

The unit will search for the Program Type categorized under

[

SPEECH

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

:Synchronizes the unit’s time to the Radio Data System

station time.;

]/ [

NEWSSET

DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE DOCUMENT

POPM

(music),

NATIONM

] or [

MUSIC

OFF

:Cancels.

]/ [

REGIONAL

(information),

ROCKM

CLASSICS, OTHERM

(music),

] if selected.

(music),

OLDIES, FOLKM

/ [

AFSET

(music),

]/ [TI]/ [

EASYM

(music)

PTYSEARCH

SPORT, EDUCATE

(music),

JAZZ, COUNTRY

] is

LIGHTM

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Label side

USB input terminal

USB

Eject disc

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional

accessory) the iPod/iPhone

ANDROID

Micro USB 2.0 cable

or accessory cable of

(commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

To On the faceplate On the remote control

Playback / pause Press .

Reverse / Fast-forward

Select a track/file

Select a folder

Repeat play

Press and hold S/T. Press and hold S/ .

Press S/T. Press S/

Press / .

Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

: Audio CD

Press

/ .

: MP3/WMA/AAC/WAV file,

iPod or ANDROID

Random play

FILE REPEAT/ REPEAT OFF

Press repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

: KME Light/ KMC file

: Audio CD

: MP3/WMA/AAC/WAV file, KME Light/

KMC file, iPod or ANDROID

Press and hold

to select

ALLRANDOM

ENGLISH

CD / USB / iPod / ANDROID

To On the faceplate

Select control mode

While in iPod source, press repeatedly.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

( 9, [

ANDROID SETUP])

Select music drive (

9, [

MUSIC

DRIVE]

)

Press repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

21)

For ANDROID: Applicable only when [

SETUP

])

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 21)

For CD: Only for MP3/WMA/AAC files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODEOFF

] is selected. (

]/ [

BROWSE MODE

9, [ANDROID

] is selected.

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. (

9, [

SKIP SEARCH

Press and hold S/T to search at a 10

])

ratio.

• Not applicable for CD and MP3/WMA/AAC/WAV files. For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

•

To search for a character other than A to Z and 0to9, enter only “

”.

• Press and hold / changes the characters rapidly.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

mode

)

• For ANDROID, applicable only when [ (

9, [

ANDROID SETUP

])

MODEOFF

BROWSE MODE

] is selected. ( 

] is selected.

Select control

CD / USB / iPod / ANDROID

Direct Music Search (using RC-406)

Press DIRECT.

1 2 Press the number buttons to enter a track/file number. 3 Press to search for music.

• To cancel, press or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod, ANDROID, KME Light/ KMC file.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/ iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press FNC to enter [

1 2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE HANDMODE

KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSICDRIVE DRIVECHANGE

SKIPSEARCH 0.5%/ 1%/ 5%/ 10%

: Control from the unit (using KENWOOD MUSIC PLAY application).;

:Control other media player applications from the Android device (without using

FUNCTION

playback starts. Repeat steps

the skip search ratio over the total files.

:The next drive ([

to 3 to select the following drives.

DRIVE 1

: While listening to iPod, ANDROID or KME Light/ KMC file, selects

] to [

DRIVE 5

]) is selected automatically and

Default:

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press FNC to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to select [

the knob.

4 Turn the volume knob to make a selection, then press the

knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 5)

FUNCTION

SYSTEM

], then press the

AUXNAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

Portable audio player

ENGLISH

], then press

Pandora®

Preparation:

Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [

] for [

PANDORASRC

Start listening

Open the Pandora application on your device.

1 2 Connect your device to the USB input terminal.

]. ( 5)

Create and save a new station

Press and hold FNC.

1 2 Turn the volume knob to select [

press the knob.

A new station is created based on the current song or artist.

FROM TRACK

] or [

FROM ARTIST

], then

3 Press and hold one of the number buttons (3to6) to store.

To select a stored station, press one of the number buttons (3to6).

USB input terminal

KCA-iP102 / KCA-iP103 (optional

The source changes to PANDORA and broadcast starts.

To On the faceplate On the remote control

Playback / pause Press .

Skip a track

Thumbs up or thumbs

down

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

accessory) the iPod/iPhone

or accessory cable of

Press T.

Press / .

Press

/ .

Search for a registered station

Press .

1 2 Turn the volume knob to make a selection, then press the knob.

[

BYDATE

[

]:According to the registered date

A-Z

]:Alphabetical order

3 Turn the volume knob to the desired station, then press the knob.

To cancel, press and hold .

(or using RC-406)

Press J / K to search for a station, then press .

Bookmark a song or artist information

Press and hold .

1 2 Turn the volume knob to make a selection, then press the knob.

[

THIS TRACK

[

THIS ARTIST

“BOOKMARKED” appears and the information is stored to your device.

The bookmark is available on your Pandora account but not on this unit.

]:Current song information

]:Current artist information

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone (supplied)

Microphone input jack

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

Pair a Bluetooth device

When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device.

1 Press to turn on the unit. 2 Search and select this unit model name (DPX-U5

“PAIRING”

display.

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the

BT) on the Bluetooth device.

***

• For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

• Refer also to the manual supplied with your Bluetooth device. 3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed and “

connection is established.

• Up to five devices can be registered (paired) in total.

• Only one Bluetooth device can be connected at any time.

• This unit supports Secure Simple Pairing (SSP).

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device,

• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if:

– Bluetooth function of the connected devcie is turned on. – [

AUTO PAIRING

– KENWOOD MUSIC PLAY application is installed on the Android device.

] is set to [ON]. ( 15)

15, [

” will light up when the Bluetooth

DEVICE DELETE

ENGLISH

BLUETOOTH®

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call: – All the buttons flash. – The unit answers the call automatically if [

During a call: – The buttons and display illuminate according to the settings made for [ – If you turn off the unit, the Bluetooth connection is disconnected.

To On the faceplate On the remote control

Answer a call

Reject a call

End a call

Adjust the phone volume

[00]

[35]

(Default:

Switch between handsfree and private talk modes

Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.

Press number buttons (1 to 6).

Press

Turn the volume knob during a call.

[15]*

)

• This adjustment will not affect the volume of the other sources.

Press 6 during a call.

• Operations may vary according to the connected Bluetooth device.

AUTO ANSWER

] is set to a selected time. ( 13)

DISPLAY

or one of the

or .

Press

]. ( 18)

—

Improve the voice quality

While talking on the phone...

1 Press FNC to enter [

FUNCTION

2 Turn the volume knob to make a selection

(see the following table), then press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

MIC GAIN –10

NR LEVEL –5

ECHO CANCEL –5

—

+10(–4

the microphone increases as the number increased.

—+5(0):Adjust the noise reduction level until the least noise is being heard during a phone conversation.

—+5(0):Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

):The sensitivity of

BLUETOOTH®

Make the settings for receiving a

call

Press to enter Bluetooth mode.

2 Turn the volume knob to make a

selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

Default:

SETTINGS

AUTO ANSWER

BATT/SIGNAL AUTO

—30:The unit answers incoming call automatically in the selected time (in seconds).;

:Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected.;

OFF

:Cancels. Clock time is shown.

OFF

:Cancels.

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on

the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

CALL HISTORY

Press the volume knob to select a name or a phone number.

• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previous call status.

• Press

• “NO DATA” appears if there is no recorded call history.

Press the volume knob to call.

to change the display category (NUMBER or NAME).

ENGLISH

BLUETOOTH®

PHONE BOOK

NUMBER DIAL

VOICE

BATT

SIGNAL

Functionality depends on the type of the phone used.

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1 volume knob.

• To select the desired first letter, press knob.

Select “1” to search with numbers and select “

symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob

to call.

•

If the phone supports PBAP, the phonebook of the connected phone is

automatically transferred to the unit when pairing.

•

Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL

•

This unit can display only non-accent letters. (Accent letters such as

“Ú” is showns as “U”.)

(



Make a call using phone book

Turn the volume knob to select a number (0 to 9) or character (*, #,

+).

Press

S/T

Repeat steps

Press the volume knob to call.

(or using RC-406)

Press the number buttons (0 to 9) to enter the phone number.

Press to call.

Speak the name of the contact you want to call or the voice command to control the phone functions.

LOW/ MID/ FULL

NO SIGNAL/ LOW/ MID/ MAX

received signal.

to move the entry position.

and 2 until you finish entering the phone number.

:Shows the strength of the battery.

S/T

” to search with

)

(

Make a call using voice recognition

:Shows the strength of the current

), turn the

, then press the

Make a call using phone book

Press to enter phone book directly.

1 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the

knob to call.

Make a call using voice recognition

Press and hold to activate the connected phone.

1 2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of iPhone.

Delete a contact

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select [

CALL HISTORY

], then press the knob.

3 Turn the volume knob to select a contact. 4 Press and hold the volume knob to enter delete mode. 5 Turn the volume knob to select [

press the knob.

DELETE ONE DELETE ALL:

deleted.

: Selected name or phone number in step 3 is deleted. All names or phone numbers in [

6 Turn the volume knob to select [ 7 Press and hold to exit.

)

• To return to the previous setting item, press .

• Not applicable for mobile phone that supports PBAP.

DELETE ONE

YES

] or [

DELETE ALL

CALL HISTORY

], then press the knob.

] in step 2 is

], then

BLUETOOTH®

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1to6).

1 Press to enter Bluetooth

mode.

2 Turn the volume knob to select [

[

PHONE BOOK

knob.

], or [

NUMBER DIAL

CALL HISTORY

], then press the

3 Turn the volume knob to select a contact or

enter a phone number.

If a contact is selected, press the volume knob

to show the phone number.

4 Press and hold one of the number buttons (1

to 6).

“STORED” appears when the contact is stored. To erase a contact from the preset memory, select

[

NUMBER DIAL

] in step 2 and store a blank number.

Make a call from memory

Press to enter Bluetooth

mode.

2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts

stored.

Other settings

Press FNC to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated

on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

BT MODE

PHONE SELECT

AUDIO SELECT

DEVICE DELETE

PIN CODE EDIT (0000)

RECONNECT ON

AUTO PAIRING ON

INITIALIZE YES

Selects the phone or audio device to connect or disconnect. “

” appears in front of the device name when connected.

•

You can only connect another Bluetooth device by disconnecting the connected Bluetooth device

first. “

” disappears when disconnected.

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select [

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S/T to move the entry position.

Repeat steps

Press the volume knob to confirm.

:The unit automatically reconnect when the last connected Bluetooth device is within range.;

OFF

:Cancels.

:The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device) when it is connected through USB input terminal.Depending on the operating system of the connected device, this function may not work. ;

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

:Cancels.

and 2 until you finish entering the PIN code.

YES

] or [NO], then press the knob.

OFF

:Cancels.

Default:

ENGLISH

+ 35 hidden pages