Kenwood DPX-U5140 User Manual

DPX-U5140

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

Pandora® 10

AUDIO SETTINGS 11

DISPLAY SETTINGS 12

TROUBLESHOOTING 12

MORE INFORMATION 14

SPECIFICATIONS 15

INSTALLATION / CONNECTION 16

How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• [

] indicates the selected items.

• (

XX) indicates references are

available on the stated page.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

BASICS

Faceplate Remote control (RC-406)

Loading slot Display window

Not used

How to replace the battery

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

Volume knob

(turn/press)

To On the faceplate On the remote control

Turn on the power

Adjust the volume Turn the volume knob. Press

Select a source

Change the display information

Press

• Press and hold to turn off the power.

Press the volume knob during playback to attenuate the sound.

• Press again to cancel.

Press

• Press and hold to scroll the current display information.

Reset button

• Your preset adjustments will also be erased.

repeatedly.

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

or .

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Press SRC repeatedly.

( not available )

ENGLISH

GETTING STARTED

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “CANCELDEMO”

1 Press the volume knob.

[

YES

] is selected for the initial setup.

2 Press the volume knob again.

“DEMOOFF” appears.

Set the clock

Press FNC to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make the settings, then press the knob.

Day

Hour Minute

5 Turn the volume knob to select [ 6 Turn the volume knob to select [ 7 Press and hold to exit.

To return to the previous setting item, press .

“PRESS” “VOLUMEKNOB”

FUNCTION

CLOCK

], then press the knob.

CLOCKADJUST

CLOCKFORMAT 12H

] or [

24H

], then press the knob.

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press FNC to enter [

• Pressing AUDIO enter [

FUNCTION

AUDIO CONTROL

] directly.

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6×9/6/ OEM

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

REAR/ SUBWOOFER

connected to the line out terminals on the rear (through an external amplifier).

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

:Both display and button illumination change to white color when entering [ remain as [

NORMAL

(FM1/ FM2/ FM3/ MW/ SW1/ SW2).; each preset button, regardless of the selected band.

: Selects whether rear speakers or a subwoofer are

: Selects according to the speaker size (5inches

FUNCTION

].;

OFF

COLORSELECT

:Memorizes one station for each preset button in each band

:Both display and button illumination

] color. ( 12)

MIX

:Memorizes one station for

GETTING STARTED RADIO

SYSTEM

KEY BEEP

SOURCE SELECT

PANDORA SRC

BUILT-IN AUX ON

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

CLOCK

CLOCK DISPLAY

:Activates the keypress tone.;

OFF

:Deactivates.

:Enables PANDORA in source selection.;

OFF

:Disables. ( 10)

:Enables AUX in source selection.;

OFF

:Disables. ( 9)

:Automatically distinguishes between audio file disc and music CD.; CD. No sound can be heard if an audio file disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even

when the unit is turned off.;

:Forces to play as a music

OFF

:Cancels.

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly (or press / on RC-406) to select FM1/ FM2/

FM3/ AM/ SW1/ SW2.

3 Press S/T (or press S/ on RC-406) to search for a station.

• To change the searching method for S/T: Press and hold repeatedly. AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or press one of the number buttons (1to6) on RC-406).

Direct Access Tuning (using RC-406)

Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM), “– – – –” (for AM/ SW1) or “– – – – –” (for SW2) appears on the display.

2 Press the number buttons to enter a frequency. 3 Press to search for a station.

• To cancel, press or DIRECT.

• If no operation is done for 10seconds after step canceled.

2, Direct Access Tuning is automatically

ENGLISH

RADIO

Other settings

Press FNC to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

TUNER SETTING

LOCAL SEEK*

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH

:Searches only stations with good reception.;

•

Settings made are applicable only to the selected source/station. Once you change

the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.; NO:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

: The unit will temporarily switch to News Programme if available. ;

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

OFF

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

OFF

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( Selects the available Program Type (see the following), then, press start.

:Cancels.

NORMAL

] is selected for [

ENGLISH/ FRENCH/ GERMAN

OFF

:Cancels.

PRESETTYPE

), then press the knob.

]. ( 4)

OFF

:Cancels.

OFF

: Cancels.

S/T

CLOCK

TIME SYNC

Only for AM/ SW1/ SW2 source.

• [

MONOSET

selectable only when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH : NEWS, AFFAIRS, INFO

MUSIC

The unit will search for the Program Type categorized under

[

SPEECH

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

:Synchronizes the unit’s time to the Radio Data System

station time.;

]/ [

NEWSSET

DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE DOCUMENT

POPM

(music),

NATIONM

] or [

MUSIC

OFF

:Cancels.

]/ [

REGIONAL

(information),

ROCKM

CLASSICS, OTHERM

(music),

] if selected.

(music),

OLDIES, FOLKM

/ [

AFSET

(music),

]/ [TI]/ [

EASYM

(music)

PTYSEARCH

SPORT, EDUCATE

(music),

JAZZ, COUNTRY

] is

LIGHTM

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Label side

USB input terminal

USB

Eject disc

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional

accessory) the iPod/iPhone

ANDROID

Micro USB 2.0 cable

or accessory cable of

(commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

To On the faceplate On the remote control

Playback / pause Press .

Reverse / Fast-forward

Select a track/file

Select a folder

Repeat play

Press and hold S/T. Press and hold S/ .

Press S/T. Press S/

Press J/K.

Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

: Audio CD

Press

/ .

: MP3/WMA/WAV file, iPod or

ANDROID

Random play

FILE REPEAT/ REPEAT OFF

Press repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

: KME Light/ KMC file

: Audio CD

: MP3/WMA/WAV file, KME Light/ KMC

file, iPod or ANDROID

Press and hold

to select

ALLRANDOM

ENGLISH

CD / USB / iPod / ANDROID

To On the faceplate

Select control mode

While in iPod source, press repeatedly.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

( 9, [

ANDROID SETUP])

Select music drive (

9, [

MUSIC

DRIVE]

)

Press repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

14)

For ANDROID: Applicable only when [

SETUP

])

For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 14)

For CD: Only for MP3/WMA files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODEOFF

] is selected. (

]/ [

BROWSE MODE

9, [ANDROID

] is selected.

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. (

9, [

SKIP SEARCH

Press and hold S/T to search at a 10

])

ratio.

• Not applicable for CD and MP3/WMA/WAV files. For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

•

To search for a character other than A to Z and 0to9, enter only “

”.

• Press and hold J/K changes the characters rapidly.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

mode

)

• For ANDROID, applicable only when [ (

9, [

ANDROID SETUP

])

MODEOFF

BROWSE MODE

] is selected. ( 

] is selected.

Select control

CD / USB / iPod / ANDROID

Direct Music Search (using RC-406)

Press DIRECT.

1 2 Press the number buttons to enter a track/file number. 3 Press to search for music.

• To cancel, press or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod, ANDROID, KME Light/ KMC file.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/ iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press FNC to enter [

1 2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE HANDMODE

KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSICDRIVE DRIVECHANGE

SKIPSEARCH 0.5%/ 1%/ 5%/ 10%

: Control from the unit (using KENWOOD MUSIC PLAY application).;

:Control other media player applications from the Android device (without using

FUNCTION

playback starts. Repeat steps

the skip search ratio over the total files.

:The next drive ([

to 3 to select the following drives.

DRIVE 1

: While listening to iPod, ANDROID or KME Light/ KMC file, selects

] to [

DRIVE 5

]) is selected automatically and

Default:

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press FNC to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to select [

the knob.

4 Turn the volume knob to make a selection, then press the

knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 5)

FUNCTION

SYSTEM

], then press the

AUXNAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

Portable audio player

ENGLISH

], then press

Pandora®

Preparation:

Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [

] for [

PANDORASRC

Start listening

Open the Pandora application on your device.

1 2 Connect your device to the USB input terminal.

]. ( 5)

Create and save a new station

Press and hold FNC.

1 2 Turn the volume knob to select [

press the knob.

A new station is created based on the current song or artist.

FROM TRACK

] or [

FROM ARTIST

], then

3 Press and hold one of the number buttons (3to6) to store.

To select a stored station, press one of the number buttons (3to6).

USB input terminal

KCA-iP102 / KCA-iP103 (optional

The source changes to PANDORA and broadcast starts.

To On the faceplate On the remote control

Playback / pause Press .

Skip a track

Thumbs up or thumbs

down

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

accessory) the iPod/iPhone

or accessory cable of

Press T.

Press / .

Press

/ .

Search for a registered station

Press .

1 2 Turn the volume knob to make a selection, then press the knob.

[

BYDATE

[

]:According to the registered date

A-Z

]:Alphabetical order

3 Turn the volume knob to the desired station, then press the knob.

To cancel, press and hold .

(or using RC-406)

Press J / K to search for a station, then press .

Bookmark a song or artist information

Press and hold .

1 2 Turn the volume knob to make a selection, then press the knob.

[

THIS TRACK

[

THIS ARTIST

“BOOKMARKED” appears and the information is stored to your device.

The bookmark is available on your Pandora account but not on this unit.

]:Current song information

]:Current artist information

AUDIO SETTINGS

While listening to any source...

1 Press AUDIO to enter [ 2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

(or using RC-406)

1 Press AUD to enter [ 2 Press J / K to make a selection, then press .

To return to the previous setting item, press

SUB-WLEVEL –15

BASSLEVEL –8

MIDLEVEL –8

TRELEVEL –8

EQ PRO

BASS ADJUST BASS CTR FRQ

BASS LEVEL –8

BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00

BASS EXTEND ON

MID ADJUST MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ

MID LEVEL –8

MID Q FACTOR 0.75/ 1.00/ 1.25

TRE ADJUST TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ

TRE LEVEL –8

AUDIOCONTROL

+15 (0

) Adjusts the subwoofer output level.

to +8 (+6)

to +8 (+5)

to +8 (0)

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60HZ/ 80HZ/ 100HZ/ 200HZ

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

frequency.

to +8 (+5):Adjusts the level.

center frequency.

to +8 (0):Adjusts the level.

:Adjusts the quality factor.

: Selects the center frequency.

:Adjusts the quality factor.

OFF

:Cancels.

:Selects the center

:Selects the

Default:

PRESET EQ DRIVEEQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ

BASSBOOST LEVEL1/ LEVEL2/ LEVEL3

LOUDNESS LEVEL1/ LEVEL2

SUBWOOFERSET ON

LPFSUBWOOFER THROUGH

SUB-WPHASE REVERSE

FADER R15

BALANCE L15

VOLUMEOFFSET

SOUNDRECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

selectable only if [

• [

SUB-WLEVEL

[

SUBWOOFERSET

NATURAL/ USER

genre. (Select [ [

DRIVE EQ

or running noise of the tyres.

level.;

boost to produce a well-balanced sound at a low volume level.;

OFF

:Cancels.

:Turns on the subwoofer output.;

160HZ

160Hz are sent to the subwoofer.

subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [

THROUGH

For AUX: volume adjustment level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

]/ [

SUBWOOFER SET

SWITCH PREOUT

]/ [

LPFSUBWOOFER

] is set to [ON].

:Selects a preset equalizer suitable to the music

USER

] to use the customized settings.)

] is a preset equalizer that reduces noise outside the car

OFF

:Cancels.

:All signals are sent to the subwoofer.;

:Audio signals with frequencies lower than 85Hz/ 120Hz/

(180°)/

] is selected for [

F15 (0

R15 (0

–8

to +8(0) ; For other sources: –8 to 0:Presets the

:Selects your preferred bass boost

:Selects your preferred low and high frequencies

OFF

:Cancels.

NORMAL

(0°):Selects the phase of the

LPFSUBWOOFER

):Adjusts the rear and front speaker output balance.

):Adjusts the left and right speaker output balance.

OFF

]/ [

LPF SUBWOOFER

] is set to [

]/ [

SUB-WPHASE

SUBWOOFER

].)

:Cancels.

]/ [

SUB-W PHASE

]. ( 4)

] is selectable only if

85HZ/ 120HZ

ENGLISH

] is

+ 25 hidden pages