QUICKSTART
BR/BD 40/25 EP, Bp
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
2
A
A b
A
Ep model
A Establish mains contact.
Bp model
A Unplug the charger from the mains.
B Place the mains cable into the storage com-
partment.
b
A Open the cover.
B Fill in the water up to the MAX marking of the
filling level display. Maximum temperature of
the liquid 60°C.
C Pour in detergent.
D Close the lid.
C
GB
5.964-030.0 08/11
QUICKSTART
1
2
Operation
A b Starting the machine
A Turn the programme selector switch to a
cleaning programme
B Press control switch.
Cleaning Programs
A Normal mode
Wet clean the floor and vacuum up dirt water.
B Intense mode
Wet clean the floor and allow the detergent to
react.
C Vacuum mode
Vacuum the wastewater.
D Polishing mode
Polishing the floor without the application of
liquid.
3
4
5
A Setting the water quantity
A Adjust the water quantity using the regulating
button according to the dirt on the floor cover-
ing.
A
A Lower the vacuum bar
Swivel in the transport roller.
A Swivel the transport roller in via the foot ped-
al.
A Lower the lever for lowering the vacuum bar
downwards; the vacuum bar is lowered.
A Setting the Advance Speed (BD clean-
6
ing head only)
A Set the advance speed.
Increase the advance drive:
Turn the button in "+" direction.
Decrease the advance drive:
Turn the button in "–" direction.
5.964-030.0 08/11
QUICKSTART
Finish operation
1
2
A
GB
A b C Emptying the Dirt Water Reservoir
b
E
C
F
Turn off the appliance
A Close the regulatory button for setting the wa-
ter quantity.
B Release the control handle.
C Pull suction bar lowering lever upwards.
D Turn the program selection switch to "OFF".
E Swivel the transport roller out via the foot
pedal.
Ep model
F Disconnect the mains connection cable.
몇 Warning
Please observe the local provisions regarding the
wastewater treatment.
A Take the water discharge hose from the sup-
port and lower above a suited collection de-
vice.
B Rinse the dirt water tank with clear water.
Take the water discharge hose from the sup-
port and lower above a suited collection de-
vice.
C Leave the cover open to let it dry.
3
4
A Emptying the Fresh Water Tank
몇 Warning
Please observe the local provisions regarding the
wastewater treatment.
A Remove the suction hose coupling for drain-
ing off the fresh water and hold it over a suit-
able container.
A Charging battery
Bp model
A Charge battery, if required.
Insert the plug of the connecting cable into
the socket.
5.964-030.0 08/11
QUICKSTART
Maintenance and care
1
A
C
daily
b
몇 Warning
Please observe the local provisions regarding the wastewater treatment.
A Take the water discharge hose
from the support and lower above a
suited collection device.
B Rinse the dirt water tank with clear
water.
Take the water discharge hose
from the support and lower above a
suited collection device.
Leave the cover open to let it dry.
C Remove the suction hose coupling
for draining off the fresh water and
hold it over a suitable container.
Rinse the fresh water tank with
clear water.
monthly
Kärcher Customer Service
2
5
6
A A Check the fluff filter, clean if re-
quired
A b A Clean the vacuum lips on the vacu-
um bar, turn or replace if required
B Clean the suction channel.
A A Clean the seals between dirt water
reservoir and cover and check for
tightness, replace if required.
A Every 200 operating hours
7
Every 600 operating hours
Every 800 operating hours
5.964-030.0 08/11
QUICKSTART
Troubleshooting
1
2
A
A
A
GB
b C
E
Appliance cannot be started
Ep model
A Establish mains contact.
Bp model
A Please watch battery indicator.
Charge the battery if required.
Insufficient vacuum performance
A Clean the seals between dirt water reservoir
and cover and check for tightness, replace if
required.
B Clean the vacuum lips on the vacuum bar,
turn or replace if required
C Check suction hose for blockages; clean if re-
quired.
Check connection between suction hose and
suction bar and suction hose and wastewater
tank.
D Check the fluff filter, clean if required
E Check the setting of the vacuum bar.
F Check if the cover on the dirt water discharge
hose is closed
3
4
5
A b Insufficient cleaning result
A Check brush for wear and tear and clean it.
Check the brushes for wear (bristle length at
least 10 mm), replace if required.
A b Insufficient water quantity
A Check fresh water level, refill tank if neces-
sary.
B Adjust the water quantity using the regulating
button according to the dirt on the floor cover-
ing.
Brushes do not turn
Check the brushes for blockage due to foreign
particles, remove them if found.
5.964-030.0 08/11
Loading...