JAMO IO-A2 User Manual

Indoor/Outdoor

1A2, 3A2, 3T, 8A2

Congratulations on your purchase of

Jamo Indoor/Outdoor speakers.

Package content.

Speaker (2) Thumb screw “k” (4) Port plug “i” (4)
Curved bracket “a” (2) 1” Allen bolt “d” (4) Screw plug “g” (8)
Wall bracket “b” (2) ½” Allen bolt “e” (4) Manual (1)
Wall bracket cover “c” (2) Allen wrench (1)

Assembly of bracket.

Place the curved bracket (a) between the wall bracket (b) and wall bracket
cover (c) as shown in fig. 1. Insert two 1” allen bolts (d) through wall bracket
into wall bracket cover and tighten with the supplied allen wrench. Insert
two ½” allen bolts (e) into each side of wall bracket and tighten towards
curved bracket.

Mounting of bracket.

The bracket can be mounted for horizontal or vertical placement of the
speaker. Mount the bracket with four screws (not included) appropriate for
the surface the bracket is mounted to (wood, brick, concrete or other). Take
into account the weight of the speaker (specifications on back). A hole (f) in
the middle of the bracket allows for running the speaker wire through the
bracket if so desired. Cover the screws with four screw plugs (g) fig. 2.

Mounting of port plugs.

If the front of the speaker is exposed to rain directly entering the bass reflex
ports (under the grill), the ports should be closed to avoid filling the
speaker with water. High moisture is not a problem. Remove the grill (h)
from the speaker and insert two port plugs (i) into the bass ports. Re-install
the grill. The speaker will reproduce less bass with the ports closed.

a

e

f

c

Fig. 1

d

d

b

e