3. Four Hot-Plug (shown) or Four Non hot-plug (not shown)
Drive Bays
4. Four Expansion Slots (Two PCI-X, One PCI, and One PCI
Express)
5. Four DIMM Sockets, for up to 4GB DDR memory
6. System Fan
7. 350W Power Supply
At A Glance
Supports a single 3.0 GHz, 3.20 GHz, or 3.40 GHz Intel® Pentium® 4 processor with 1MB or 2MB cache size or a
single 2.8 GHz Intel Celeron processor with 256KB cache size.
Intel® Pentium® 4 processors include support for Hyper-Threading
Intel E7221 Chipset supporting 800MHz FSB (with Pentium 4 processor) or 533MHz FSB (with Celeron processor)
PC3200 400MHz DDR SDRAM with advanced unbuffered ECC capabilities and optional interleaving (expandable up
to 4 GB)
Embedded NC7761 PCI 10/100/1000T Gigabit network adapter
Four Expansion Slots: Two PCI-X 64-bit/100MHz, One PCI 32-bit/33MHz slot, One PCI Express slot (X8 connector, x4
speed)
SCSI models include
Single Channel Ultra320 SCSI Adapter in PCI-X slot
SATA models include
Integrated four Channel SATA Controller
Four USB 2.0 ports - Two on front, two on rear
ROM Based Setup Utility (RBSU) and PXE support
Protected by HP Services including a one-year, Next Business Day limited global warranty - Certain restrictions and
exclusions apply.
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 1
QuickSpecs
Standard Features
HP ProLiant ML310 Generation 2
Processor
One of the following
Cache Memory
One of the following
depending on Model
Memory Protection
Memory
Intel Pentium 4 - 3.4 GHz/800-2MB L2
NOTE:
See "Configuration Information - Factory Integrated Models" section
Intel Pentium 4 - 3.2 GHz/800-2MB L2
Intel Pentium 4 - 3.4 GHz/800-1MB L2
Intel Pentium 4 - 3.2 GHz/800-1MB L2
Intel Pentium 4 - 3.0 GHz/800-1MB L2
NOTE:
See "Configuration Information - Factory Integrated Models" section
HP's new HP Systems Insight Manager (HP SIM) helps maximize
system uptime and performance and reduce system maintenance costs
by providing proactive notification of problems before those problems
result in unplanned downtime or reduced productivity. HP SIM are both
easy to set up work with the Insight Management Agents, integrated
Lights-Out and Remote Insight Lights-Out Edition, and Version Control
Agents to deliver robust fault, configuration, and asset management as
well as remote administration. With HP SIM customers will also be able
to take advantage of role-based security; the ability to manage ProLiant,
Integrity, and HP 9000 systems; and plug-ins for storage, client, printer,
and power management as well as server rapid deployment,
performance management, and workload management. For more
details on HP SIM visit
The Management Agents form the foundation for HP's Intelligent
Manageability strategy. They provide direct, browser-based access to
in-depth instrumentation built into HP servers, workstations, desktops,
and portables, and send alerts to HP Systems Insight Manager and
other enterprise management applications in case of subsystem or
environmental failures. For additional information about the
Management Agents and other management products from HP, please
visit the management Web site at
http://www.hp.com/go/hpsim
http://www.hp.com/servers/manage
.
.
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 3
QuickSpecs
Standard Features
HP ProLiant ML310 Generation 2
SmartStart
Subscriber's Choice
ROMPaq, support
software, and
configuration utilities
Survey Utility and
diagnostics utilities
Optional ProLiant
Essentials Value Packs
SmartStart is a tool that simplifies server setup, providing a rapid way to
deploy reliable and consistent server configurations. For more
information, please visit the SmartStart Web site at
http://www.hp.com/servers/manage
SmartStart version supported (minimum): SmartStart 7.20.
Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides automatic delivery of
software and driver change notifications for ProLiant products. Sign up
at
http://www.hp.com/go/subscriberschoice
to receive various new alerts as they become available, on a weekly or
monthly basis.
The latest software, drivers, and firmware fully optimized and tested for
your ProLiant server and options available in SmartStart or
downloadable from Software and Drivers download pages, linked from
the SmartStart website at
The most advanced configuration analysis, reporting and
troubleshooting utilities used by HP and at your fingertips, available in
SmartStart.
Optional software offerings that selectively extend the functionality of an
Adaptive Infrastructure to address specific business problems and
needs:
http://www.hp.com/servers/smartstart
.
and customize your profile
.
Rapid Deployment Pack - an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and
easily adapt to changing business demands.
Workload Management Pack - provides easier management of
complex environments, improving overall server utilization and
enabling Microsoft® Windows® 2000 customers for the first time
to confidently deploy multiple applications on a single
multiprocessor ProLiant Server.
Performance Management Pack - a performance management
solution that identifies and explains hardware performance
bottlenecks on ProLiant servers and attached options enabling
users to better utilize their valuable resources.
Intelligent Networking Pack - detects and analyzes network
bottlenecks or broken network linkages and steers traffic to the
optimum route based on network conditions, plus it provides an
extra layer of protection. The virus throttle feature of the solution
slows the propagation of fast spreading virus
Vulnerability and Patch Management Pack - identifies and
remediates software security vulnerabilities due to missing
patches as well operating system configurations that can be
exploited by viruses, worms, and other blended threats
Virtual Machine Management Pack - provides central
management and control of virtual machines from Microsoft and
VMware. Integrated approach provides the ability to manage both
physical and virtual resources from a single management
console.
Server Migration Pack - The Server Migration Pack automates the
manual processes required for migrating servers between
physical or virtual platforms (P2V, V2P, and V2V).
NOTE
: Flexible and volume quantity license kits are available for
ProLiant Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
or the various ProLiant
Page 4
QuickSpecs
Standard Features
HP ProLiant ML310 Generation 2
Essentials Value Pack product QuickSpecs for more information.
Industry Standard
Compliance
Manageability
Security
NOTE:
URL:
For more information regarding ProLiant Essentials Software, please see the following
http://www.hp.com/servers/proliantessentials
ACPI V1.0b Compliant
PCI 2.2 Compliant
PCI-X 1.0 Compliant
PCI-Express 1.0a Compliant
PXE Support
WOL Support
Microsoft Logo certifications
Novell Logo certifications
USB2.0
HP Systems Insight Manager
Online ROM Flash Utility
Automatic Server Recovery-2 (ASR-2)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and SCSI hard drives)
BIOS Serial Console
Power-on password
Setup password
Diskette boot control
Power switch security
Intruder Alert Message
.
Server Power Cords
UPS and PDU Power
Cord Matrix
Power Specifications
Power Supply
System Fans
Required Cabling
All models ship with one 6' standard low-line country specific power cord.
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
Does not include fans in CPU heatsink or power supply.
.
.
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 5
QuickSpecs
Standard Features
HP ProLiant ML310 Generation 2
OS Support
Rack Airflow
Requirements
Microsoft Windows Server 2003 (Standard & Web Edition)
Microsoft Small Business Server 2003
Microsoft Windows 2000 Server
Novell NetWare
Linux (Red Hat, SuSE, and UnitedLinux)
VMware Virtualization Software
NOTE:
For a more complete and up-to-date listing of supported OSs and versions, please visit our
OS Support Matrix at:
NOTE:
For an up-to-date listing of the latest drivers available for the HP ProLiant ML310, please
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
For more complete and up-to-date information on how to buy server operating systems
For more information on HP's Certified and Supported ProLiant Servers, please visit the
http://www.hp.com/go/supportos
.
Factory Express
Portfolio for Servers
and Storage
CAUTION:
adequate airflow and to prevent damage to the equipment:
CAUTION:
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section at the
following URL:
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
If a third-party rack is used, observe the following additional requirements to ensure
Front and rear doors:
you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to
bottom to permit adequate airflow (equivalent to the required 64 percent open area for
ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 2.75 inches (7 cm).
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
If your 42U server rack includes closing front and rear doors,
.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
http://www.hp.com/go/factory-express
.
Page 6
QuickSpecs
Standard Features
HP ProLiant ML310 Generation 2
Custom Builder
HP ProLiant Smart
Buys
(NA only)
Service and Support
Please see the Enterprise Configurator for configuration assistance at:
http://www.hp.com/products/configurator
The HP Smart Buy program offers mainstream business solutions at competitive prices with
excellent availability and superior HP quality. It offers a wide range of industry-leading HP
products at compelling prices, allowing you to receive richer configurations with additional options.
NOTE:
ProLiant Smart Buys are available in NA only. For detailed specification information on
ProLiant Smart Buys please click on the following link:
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of resellers and service providers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under the warranty or
available for an additional fee. Enhancements to warranty services are available through HP Care
Pack services or customized service agreements.
NOTE: Limited warranty includes 1 year parts, 1 year labor, 1 year on-site support.
Care Pack services provide a range of life cycle support options that let you choose the service
levels that meet your business requirements, from basic to mission-critical.
.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24
hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials
and VMWare-based IT solutions helping to deliver high level of application availability.
Response times range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services include coverage for the HP branded hardware options qualified for the
server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and
smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the
same service level and for the same coverage period as the server. Coverage of UPS Battery is
not included, standard warranty terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed within the same rack.
NOTE:
For more information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
http://www.hp.com/hps/carepack
NOTE:
For more complete information on HP Services offerings, customers and resellers, please
visit us at:
NOTE:
available at:
http://www.hp.com/hps
Additional information regarding worldwide limited warranty and technical support is
320 GB maximum non hot plug SATA (with optional hard drives)
NOTE:
See the "Storage" section of these QuickSpecs for information
on controllers and cables required to support SATA drive configurations
48x IDE (ATAPI) CD-ROM Drive
None ship standard (Optional 1.44 MB Diskette Drive)
Tower (5U) (Tower to Rack Enabling Option Kit available)
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 11
QuickSpecs
HP ProLiant ML310 Generation 2
Configuration Information - Factory Integrated Models (North America only)
NOTE:
For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE:
All configure-to-order servers must start with a CTO Chassis. Use the following section to order a server customized
to your requirements with options integrated at the factory. The options you select in steps 2 and 3 will be integrated with the
base configuration you select in step 1. Additional options selected in Step 4 will also be integrated when applicable.
NOTE:
Server Configuration Level 1.
Standard models of this product offering (see previous section of this document) do not support HP Factory Express
Step 1: Base Configuration
Models
HP ProLiant ML310 Tower CTO Chassis NHP SCSI (North America)
HP ProLiant ML310 Tower CTO Chassis NHP SATA (North America)
HP ProLiant ML310 Tower CTO Chassis HP-SCSI US (North America)
HP ProLiant ML310 Tower CTO Chassis HP-SATA/SAS (North America)
For use with a single server. Contains one license with a unique license
activation key and documentation.
ProLiant Essentials Server Migration Pack, Single-Migration License
NOTE:
activation key and documentation.
NOTE:
virtual machine. Or this license can be used to migrate a virtual machine from
one virtualization layer i.e. VMware GSX to a different virtualization layer such as
VMware ESX or Microsoft Virtual Server 2005.
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to
the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE:
For more information regarding ProLiant Essentials Software, please see
the following URL:
The DVD-ROM drive is supported in the CD-ROM bay and in the
removable media bay. If placed in the removable media bay, it requires the 2Device IDE cable (PN 305381-B21).
HP DVD+R/RW 16X Half Height
1.44MB Floppy Drive Option Kit
HP ProLiant 2nd Serial port option kit
Ultra320 - Universal Hot Plug
HP 300GB U320 10K Universal HDD
HP 146GB U320 10K Universal HDD
HP 72GB U320 10K Universal HDD
HP 146GB U320 15K Universal HDD
HP 72GB U320 15K Universal HDD
HP 36GB U320 15K Universal HDD
Ultra320 - Non-Hot Plug
HP 146GB U320 10K NHP HDD
HP 72GB U320 10K NHP HDD
HP 36GB U320 15K NHP HDD
NOTE:
Please see the Wide Ultra320 Universal Hot Plug QuickSpecs for
additional technical information on the hard drives Support details, please see
the following:
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 15
QuickSpecs
Options
HP ProLiant ML310 Generation 2
Hard Drive Cables
Serial-ATA (SATA) Hot Plug Hard Drive
HP 250GB 1.5G SATA 7.2K 3.5" HDD
HP 160GB 1.5G SATA 7.2K 3.5" HDD
HP 80GB 1.5G SATA 7.2K 3.5" HDD
Serial-ATA (SATA) Non Hot Plug Hard Drive
Only)
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
NOTE:
Please see the Hard Drive QuickSpecs for Technical Specifications such
as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature:
This cable is required when the HP 6-port SATA RAID controller is
installed on hot plug SATA/SAS models of the ML310 G2. See the "Storage"
section of these QuickSpecs for information on controllers and cables required to
support SATA drive configurations.
HP 2-port SATA Cable
NOTE:
This cable is required when the HP 6-port SATA RAID controller is
installed on non-hot plug SATA/SAS models of the ML310 G2. See the "Storage"
section of these QuickSpecs for information on controllers and cables required to
support SATA drive configurations.
(SATA/SAS Hot Plug Models Only)
(SATA Non Hot Plug Models
349239-B21
349238-B21
349237-B21
383410-B21
389653-B21
379093-B21
Storage Controllers
SCSI Controllers
NOTE:
The following Storage Controllers are qualified for SCSI drives only. They
do not support SATA or SAS Drives.
Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 641 Controller
Smart Array 642 Controller
128MB Battery-Backed Cache Enabler
NOTE:
Array 642 Controller.
Ultra320 Expansion Module for SA-6402
64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE:
Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI
Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports,
Drives supported, Cache, RAID support, and additional information:
This 128MB BBWC supports the Smart Array 641 Controller and Smart
Please see the following Controller or SCSI Adapter QuickSpecs for
273915-B21
273914-B21
291966-B21
291967-B21
351580-B21
273911-B21
268351-B21
374654-B21
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 16
QuickSpecs
Options
HP ProLiant ML310 Generation 2
Communications
SAS Controllers
Smart Array P600 Controller
NOTE:
512MB DDR BBWC Upgrade
NOTE:
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols
supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives
supported, Cache, RAID support, and additional information:
controllers and cables required to support SATA drive configurations
HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter
HP NC310F PCI-X 1000SX Gigabit Server Adapter
HP NC320T PCI Express 1000T Gigabit Server Adapter
HP NC1020 PCI 1000T Gigabit Server Adapter
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter
HP NC7771 PCI-X 1000T Gigabit Server Adapter
NOTE:
redundancy with the embedded NC7761 NIC. When either the embedded NC7761 or the NC1020
is teamed with other HP NICs, Jumbo Frames and LSO features are automatically disabled.
Serial SCSI/ATA.
Please see the following Controller QuickSpecs for Technical
Please see the HBA QuickSpecs for additional information:
See the "Storage" section of these QuickSpecs for information on
NC61XX, NC71XX, NC77XX, or NC1020 network adapter (NIC) can be used for
(North America)
For an up-to-date listing of the latest O/S and software support details for HP
DAT drives, please visit:
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U Rack-Mount Kit
NOTE:
The 1U Rack-mount Kit can support up to (2) half-height tape drives and
compatible with multiple Single-Ended and LVD SCSI tape drives including the
DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232 and
Ultrium 448 tape drives.
complete solution; reference current compatibility information at
http://www.hp.com/go/ebs
Please see the DAT 72x6 Tape Autoloader QuickSpecs for additional
Required to install the unit in a standard 19-inch rack; includes rails and
Please reference the 1/8 Tape Autoloader QuickSpecs at
for additional information needed to create a
Q1566A
Q1567A
AF204A
AF203A
AF202A
C9268R
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 Ultrium 960 Drive Library
HP StorageWorks MSL2024 1 Ultrium 448 Drive Library
HP StorageWorks MSL2024 2 Ultrium 448 Drive Library
HP StorageWorks MSL6000 Tape Library
Ultrium 960 technology
HP StorageWorks MSL6030 1 Ultrium 960 Dr LVDS Library
HP StorageWorks MSL6030 1 Ultrium 960 Dr FC Library
HP StorageWorks MSL6030 2 Ultrium 960 Dr LVDS Library
HP StorageWorks MSL6030 2 Ultrium 960 Dr FC Library
Ultrium 460 technology
HP StorageWorks MSL6030 1 Ultrium 460 Dr LVDS Library
HP StorageWorks MSL6030 1 Ultrium 460 Dr FC Library
HP StorageWorks MSL6030 2 Ultrium 460 Dr LVDS Library
HP StorageWorks MSL6030 2 Ultrium 460 Dr FC Library
NOTE:
Please reference the MSL2024 and MSL6000 Tape Library QuickSpecs
at
http://www.hp.com/go/automation
complete solution; reference current compatibility information at
http://www.hp.com/go/ebs
.
for additional information needed to create a
AG115A
AG116A
AG117A
AD606A
AD608A
AD607A
AD609A
AD598A
AD600A
AD599A
AD601A
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 19
QuickSpecs
Options
HP ProLiant ML310 Generation 2
Magneto-Optical
Jukeboxes
Ultra Density Optical
Jukeboxes
HP StorageWorks 9.1 GB Optical Jukeboxes
600mx, 4 drive, 64 slot jukebox
1200mx, 4 drive, up to 128 slots
2200mx, 6 drive, up to 238 slots
NOTE:
Please see the HP StorageWorks Magneto-Optical Products data sheet
for a complete listing of available jukeboxes at:
HP UPS R5500 XR, (5000VA, 4500 Watt), High Voltage (NA/Jpn)
HP UPS R5500 XR, (6000VA, 5400 Watt), High Voltage (Int'l)
UPS R12000 XR N+ x (200-240V) (WW-hardwired)
NOTE:
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127
VAC) (NA, Japan)
NOTE:
model of the UPS R3000 XR.
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240
VAC) (NA, Japan)
HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240
VAC) (Int’l)
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240
VAC) (WW)
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240
VAC) (WW)
NOTE:
to country specific power requirements. This model may also be used with the
high volt UPSs R3000 XR and R6000 For North America, need to order cable
PN 340653-001.
NOTE:
Modular PDUs) QuickSpecs for additional options including shorter jumper
cables and country specific power cords:
-B21 (pallet) used to ship empty racks shipped on a truck
Please see the Rack 10000 QuickSpecs for Technical Specifications
For additional information regarding Rack Cabinets, please see the
http://www.hp.com/go/rackandpower
.
.
AF009A
AF019A
AF054A
AF056A
AF060A
AF062A
AF064A
AF066A
AF068A
AF074A
AF076A
292302-B22
257415-B21
257415-B22
245160-B21
245160-B23
245161-B21
245161-B22
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 23
QuickSpecs
Options
HP ProLiant ML310 Generation 2
Rack Options for Rack
10000 Series
HP Rack Light Kit (Neon)
HP Rack Plinth Kit (Carbon)
42U Side Panel - Graphite Metallic
36U Side Panel - Graphite Metallic
47U Side Panel - Graphite Metallic
TFT7210R Rack Mounted 17" Monitor
NOTE:
http://www.hp.com/go/kvm
TFT5600 Rack Keyboard Monitor
NOTE:
http://www.hp.com/go/kvm
1U Rack Keyboard & Drawer (Carbon)
Country Code Key
for 1U Rack Keyboard & Drawer (PN 257054-xx1))
XX = 00
XX = 03
XX = 04
XX = 05
XX = 06
XX = 07
XX = 08
For a complete list of Monitors please view the following URL:
.
For a complete list of Monitors please view the following URL:
.
(for TFT5600 Rack Keyboard Monitor (PN 221546-xx1 and
US
UK
Germany
France
Italy
Spain
Denmark
XX = 09
XX = 10
XX = 11
XX = 13
XX = 18
XX = 29
XX = B3
361589-B21
251960-B21
246099-B21
246102-B21
255486-B21
348373-B21
221546-xx1
257054-xx1
Norway
Sweden/Finland
Switzerland
Portugal
Belgium
Japan
International
HP KVM Switch
Options
NOTE
: For additional information regarding Rack Cabinets, please see the
following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-
options/index.html
IP Console Switch Box (KVM/IP), 3 x 1 x 16
IP Console Switch Box (KVM/IP), 1 x 1 x 16
Server Console Switch (KVM), 0 x 1 x 8 port
Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
USB Interface Adapter, 1 pack
Serial Interface adapter - 1 Pack with power supply
NOTE:
Switches. Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm
HP 1x 4 USB/PS2 KVM Switch, TT (NA/JPN)
HP 1x 4 USB/PS2 KVM Switch, TT (AU/NZ)
HP 1x 4 USB/PS2 KVM Switch, TT (UK)
HP 1x 4 USB/PS2 KVM Switch, TT (EU)
HP 1x 4 USB/PS2 KVM Switch, RM (ALL)
HP PS2 KVM Cable with audio, 6', 2-pack
HP USB KVM Cable with audio, 6', 2-pack
NOTE:
servers, rack mount monitors, keyboards and all related options please see the
following URL:
Cat5e cables are required to connect Interface Adapters to Console
For additional information regarding KVM switches, Serial Console
.
.
http://www.hp.com/go/kvm
.
262586-B21
262585-B21
336044-B21
336045-B21
262588-B21
262587-B21
336047-B21
373035-B21
371301-D71
371301-011
371301-031
371301-A21
371302-B21
371730-B21
371729-B21
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 24
QuickSpecs
Options
HP ProLiant ML310 Generation 2
HP Serial Console
Server Options
Service and Support
Offerings
Pack Services)
(HP Care
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE:
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL:
NOTE:
servers, rack mount monitors, keyboards and all related options please see the
following URL:
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
Hardware Installation, Electronic
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the
Customer Description and/or Data Sheet. To be delivered on a scheduled basis
8am-5pm, M-F, excl. HP holidays, Electronic
Cat5e cables are required to connect Serial Adapters to Serial Console
http://www.hp.com/go/kvm
For additional information regarding KVM switches, Serial Console
http://www.hp.com/go/kvm
.
.
AF101A
AF102A
AF103A
AF110A
U4445E
U4446E
U4447E
U4448E
U4456E
U4457E
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl.
HP holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
NOTE:
http://www.hp.com/services/carepack
For more information, customer/resellers can contact
.
U4458E
U4459E
U6306E
U8328E
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 25
QuickSpecs
HP ProLiant ML310 Generation 2
Memory
HP ProLiant ML310 G2 All Models
Standard Memory - Pentium 4 Models
Up to 4096 MB memory is available with the optional installation of PC3200 Unbuffered ECC DDR SDRAM DIMM Memory
kits.
These systems support PC3200 DDR memory and come standard with a single PC3200
DIMM installed.
The system board provides four DIMM sockets:
Socket 1 (blue connector), channel A
Socket 2 (black connector), channel A
Socket 3 (blue connector), channel B
Socket 4 (black connector), channel B
DIMMs do not need to be installed in pairs although installation of pairs (an equal DIMM for each channel) provides the best
performance. The BIOS will detect the DIMM population and set the system accordingly as follows:
Single-channel mode - DIMMs installed for one channel only
Dual-channel asymmetric mode - DIMMs installed for both channels but of unequal channel capacities.
Dual-channel interleaved mode (recommended) - DIMMs installed for both channels and offering equal channel
capacities, proving the highest performance.
These systems require DIMMs with the following parameters:
Unbuffered
256 MB, 512 MB, and 1 GB memory technology
PC3200
ECC DIMMs only
The first DIMM should be installed in Socket 1. A DIMM should not be installed in Socket 2 without a DIMM in Socket.
Likewise a DIMM should not be installed in Socket 4 without a DIMM in Socket 3. A DIMM need not be installed in Socket 2
in order to install a DIMM in Socket 3.
The table below shows some of the suggested memory configurations for these systems.
NOTE:
performance.
Table below does not list all possible configurations. Balanced-capacity, dual-channel loading yields best
Channel AChannel B
Socket 1Socket 2Socket 3Socket 4
256 MB
256 MB
512 MB
512 MB
1 GB
1 GB
1 GB
1 GB
nonenonenone
none
nonenonenone
none
nonenonenone
none
1-GB
1-GB
256 MB
512 MB
1 GB
1 GB
1 GB1 GB4 GB
none
none
none
none
Total
256 MB
512 MB
512 MB
1 GB
1 GB
2 GB
3 GB
Single-channel
Dual-channel
Single-channel
Dual-channel
Single-channel
Dual-channel
Dual-channel
asymmetric
Dual-channel
Mode
interleaved
interleaved
interleaved
interleaved
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 26
QuickSpecs
Storage
HP ProLiant ML310 Generation 2
Drive Support
Removable Media
1.44-MB Diskette Drive
IDE (ATAPI) CD-ROM
Drive
DVD-ROM Drive Option
Kit
A,
B, C
0, 1, 2, 3
Quantity
Supported
Up to 1
Up to 2
Up to 2
Position
Supported
A, B, or C
A, B, or C
A, B, or C
48x IDE (ATAPI) CD-ROM
Removable Media Bays (1.6" each)
Four Non-Hot Plug Drive Bays, or Four Hot Plug Drive Bays
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 27
QuickSpecs
Storage
HP ProLiant ML310 Generation 2
Hot Plug SAS
36GB 3G SAS 15K
72GB 3G SAS 15K
146GB 3G SAS 15K
NOTE:
Use of SAS hard drives in SATA/SAS models requires installation of the Smart Array P600.
Hot Plug Serial ATA
80GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
*
NOTE:
A maximum of two hard drives are supported when integrated RAID is enabled. Use of hot plug SATA hard drives
in positions 2 and/or 3 requires either a non-RAID configuration or installation of the HP 6-port SATA RAID controller (P/N
372953-B21) and the HP 4-port SATA/SAS target fan cable (P/N 389653-B21).
NOTE:
Hot plug capability and drive LED status support requires installation of the HP 6-port SATA RAID controller.
Non-Hot Plug SATA
80GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
*
NOTE:
drives in positions 2 and/or 3 requires either a non-RAID configuration or installation of the HP 6-port SATA RAID controller
(P/N 372953-B21) and two of the HP 2-port SATA/SAS cables (P/N 379093-B21).
NOTE:
Drive LED status support requires installation of the HP 6-port SATA RAID controller.
- (Hot Plug SATA/SAS Models Only)
Quantity
Supported
Up to 4
- (Hot Plug SATA/SAS Models Only)
Quantity
Supported
Up to 4
Up to 2
Up to 4
- (Non-Hot Plug SATA models only)
Quantity
Supported
Up to 2
Up to 4
Up to 4
A maximum of two hard drives are supported when integrated RAID is enabled. Use of non-hot plug SATA hard
*
*
*
*
*
Position
Supported
0, 1, 2, 3
Position
Supported
0, 1
0, 1, 2, 3
0, 1, 2, 3
Position
Supported
0, 1
0, 1, 2, 3
0, 1, 2, 3
Controller
Smart Array P600 Controller
Controller
Integrated four port SATA Controller with RAID 0/1
Integrated four port SATA Controller with RAID 0/1
HP 6-port SATA RAID controller
Controller
Integrated four port SATA Controller
Integrated four port SATA Controller with RAID 0/1
HP 6-port SATA RAID controller
External Storage
Modular Smart Array 30
Family
Maximum Storage Capacity
Internal
External
Total
Maximum Storage Capacity
Internal
External
Total
Tape Drives, Tape Autoloaders & Tape Libraries
Quantity
Supported
-
SATA Models
1.0TB (4 x 250GB)
29.40TB (14 x 300GB) x 7 (Requires additional SCSI controllers in slots)
30.40TB
-
SCSI Models
1.2TB (4 x 300GB hot-plug hard drives)
29.40TB (14 x 300GB) x 7
30.60TB
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 34
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.