HP LaserJet P2030 Manage and Maintain

HP LaserJet P2030 Series Printer – Manage and Maintain
Fill paper trays
How do I? Steps to perform
Load paper and print media
Tray 1
Tray 1
Face-up
Top edge leading into the product
Tray 2
Face down
Top edge at the front of the tray
Envelope printing
Use only Tray 1 for printing envelopes.
Front of envelope face-up
Short edge with postage leading into the product
Tray 1 is accessed from the front of the printer.
© 2016 Copyright HP Development Company, L.P.
Media guides ensure that the media is correctly fed into the printer and that the print is not skewed (crooked on the media). When loading media, adjust the media guides to match the width of the media that you are using.
1
www.hp.com
HP LaserJet P2030 Series Printer – Manage and Maintain
How do I? Steps to perform
NOTE: When you add new media, make sure that you
Load paper and print media (continued)
Load Tray 2
Load A6-size paper
remove all of the media from the input tray and straighten the stack of new media. This reduces jams by preventing multiple sheets of media from feeding through the printer at one time.
Media guides ensure that the media feeds correctly into the printer and that the print is not skewed. Tray 2 has side and rear media guides. When loading media, adjust the media guides to match the length and width of the media that you are using.
When loading A6-size paper, adjust the length by sliding forward only the center panel of the rear media guide.
© 2016 Copyright HP Development Company, L.P.
2
www.hp.com
HP LaserJet P2030 Series Printer – Manage and Maintain
Tray and bin capacity
How do I? Steps to perform
Tray 1
Tray 2
Standard top bin
Paper
Envelopes Up to 10 envelopes
Labels Maximum stack height: 5 mm (0.3 inch)
Transparencies Maximum stack height: 5 mm (0.3 inch)
Paper
Transparencies Maximum stack height: 26 mm (1.0 inch)
Paper Up to 125 sheets of 75 g/m2 (20lb) bond
Maximum stack height: 5 mm (0.3 inch)
Equivalent to 50 sheets of 75 g/ m
Equivalent to 250 sheets of 75 g/m2 (20 lb) bond
Maximum stack height for A6 paper: 15 mm
(0.59 inch)
2 (20 lb) bond
© 2016 Copyright HP Development Company, L.P.
1
www.hp.com
HP LaserJet P2030 Series Printer – Manage and Maintain
Replace print cartridges
How do I? Steps to perform
1 Push the button to open the print-cartridge door, and
Replace print cartridges
then remove the print cartridge.
2 Remove the new print cartridge from the bag. Place
the used print cartridge in the bag for recycling.
CAUTION: Do not touch the shutter or the surface of the
roller.
© 2016 Copyright HP Development Company, L.P.
3 Bend the tab on the left side of the cartridge until the
tab breaks loose. Pull the tab until all the tape is removed from the cartridge. Place the tab and tape in the print-cartridge box to return for recycling.
4 Grasp both sides of the print cartridge and distribute
the toner by gently rocking the print cartridge.
1
www.hp.com
HP LaserJet P2030 Series Printer – Manage and Maintain
How do I? Steps to perform
5 Align the print cartridge with the tracks inside the
Replace print cartridges (continued)
product, insert the print cartridge until it is firmly seated, and then close the print-cartridge door.
6 Installation is complete. Place the used print cartridge
in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.
© 2016 Copyright HP Development Company, L.P.
2
www.hp.com
HP LaserJet P2030 Series Printer – Clear Jams
Clear paper jams
How do I? Steps to perform
When clearing jams, be careful not to tear jammed paper. If
Clear jams from internal areas
a small piece of paper remains in the product, it could cause additional jams.
Print-cartridge area and paper path
CAUTION: Before clearing jams, turn the product off and
disconnect the power cord.
CAUTION: To prevent damage, do not expose the print
cartridge to light. Cover it with a piece of paper.
1 Push the button to open the print-cartridge door, and
then remove the print cartridge.
2 If jammed paper is visible, grasp it with both hands and
slowly pull it out of the product.
3 Replace the print-cartridge, and close the print-cartridge
door.
4 If no paper was jammed inside the print-cartridge door,
open the jam-release door at the back of the product.
© 2016 Copyright HP Development Company, L.P.
1
www.hp.com
HP LaserJet P2030 Series Printer – Clear Jams
How do I? Steps to perform
5 If jammed paper is visible, grasp it with both hands and
Clear jams from internal areas (continued)
Clear jams from the input-tray areas
Tray 1
slowly pull it out of the product.
6 Close the jam-release door.
1 Push the button to open the print-cartridge door, and
then remove the print cartridge.
CAUTION: To prevent damage, do not expose the print
cartridge to light. Cover it with a piece of paper.
© 2016 Copyright HP Development Company, L.P.
2 Lift the Tray 1 roller cover, grasp the jammed paper, and
slowly pull it out of the product.
3 Replace the print-cartridge, and close the print-cartridge
door.
2
www.hp.com
HP LaserJet P2030 Series Printer – Clear Jams
How do I? Steps to perform
1 Open the tray.
Clear jams from the input-tray areas (continued)
Tray 2
2 With both hands, grasp the jammed paper and slowly
pull it out of the product.
3 Close the tray.
© 2016 Copyright HP Development Company, L.P.
4 If no jammed paper is visible in the tray area, open the
print-cartridge door, remove the print cartridge, and pull down the upper media guide. With both hands, grasp the jammed paper and slowly pull it out of the product.
5 Replace the print-cartridge, and close the print-cartridge
door.
3
www.hp.com
HP LaserJet P2030 Series Printer – Clear Jams
How do I? Steps to perform
1 At the back of the product, open the jam-release door.
Clear jams from the output bins
CAUTION: To avoid damaging the product, do not
attempt to clear a jam in the top output bin by pulling the paper straight out.
2 With both hands, grasp the jammed paper and slowly
pull it out of the product.
3 Close the jam-release door.
© 2016 Copyright HP Development Company, L.P.
4
www.hp.com
Loading...