HP Engage Go Convertible System
Components Overview
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
HP Engage Go Convertible System
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
Pogo pin connector to convertible dock
Barcode scanner trigger buttons*
*Only available on select SKUs
HP Engage Go Convertible System
Overview
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
HP Engage Go Convertible System
Basic I/O Connectivity Base (Rear/Side View)
Basic I/O Connectivity Base components
IMPORTANT: To avoid damage to the computer, DO NOT plug a telephone cable into the cash drawer jack.
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
Advanced I/O Connectivity Base (Rear/Side View)
Advanced I/O Connectivity Base components
Powered USB 12 V ports (2)
IMPORTANT: To avoid damage to the computer, DO NOT plug a telephone cable into the cash drawer jack.
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
HP Engage Go Mobile Retail Case
Engage Go Mobile Retail Case
Engage Go Mobile Retail Case w/ MSR
Increase HP Engage Go Mobile drop specification from 3 feet (1m) to 4 feet (1.2m)*,**
(2) attach points for shoulder strap (strap included with Case)
Pen loop
Optional MSR attachment
*MIL-STD 810G testing is passed and is not intended to demonstrate fitness for U.S. Department of Defense contract requirements
or for military use. Test results are not a guarantee of future performance under these test conditions. Damage under the MIL STD
test conditions or any accidental damage requires an optional HP Accidental Damage Protection Care Pack.
**HP Total Test Process results are not a guarantee of future performance under these test conditions. Damage under the test
conditions or any accidental damage requires an optional HP Accidental Damage Protection Care Pack.
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
• 10 degree tilt adjustability (angle is set between 50 and 60 degrees)
• 180 degree swivel in either direction
• Choice of standard or printer column
• HP Smart Dock (locking, unlocking)
• Push release button with LED (Amber, White, Green) for unlocking
• Pogo pin interface (power, USB, video), magnet-assisted connection with tablet
• Stability plate (attaches to HP Advanced and Basic Connectivity Base)
• Optional countertop mounting bracket
• Configurable with connectivity base
• Ebony Black or Ceramic White color
Dimensions (W X D X H)
Convertible Dock (standard column)
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
28.39 x 16.17 cm x 24.53 cm (283.9 x 161.7 mm x 245.3 mm)
11.18 x 6.37 in x 9.66 in
9.60 cm diameter (96 mm)
3.78 in diameter
Convertible Dock (printer column)
28.39 x 16.17 cm x 28.52 cm (283.9 x 161.7 mm x 285.2 mm)
11.18 x 6.37 in x 11.23 in
9.60 cm diameter (96 mm)
3.78 in diameter
Weight (Grams, lbs.)
Convertible Dock (standard column)
2480g (5.49lbs)
Convertible Dock (printer column)
3050g (6.74lbs)
HP Engage Go Dock drop in the box:
HP Engage Go Inverted Dock White. Allows you to dock the HP Engage Go Mobile System upside down. 9EM11AV
HP Engage Go Jacket iSMP4
HP Engage Go Jacket iSMP4 B
HP Engage Go Jacket MSR+SCR+OCR+BCS
HP Engage Go Jacket MSR+SCR
HP Engage Go Jacket MSR+SCR+BCS
HP Engage Go Jacket (Base Jacket)
30.17 x 22.14 x
2.13 cm (301.7 x
221.4 x 21.3
mm)
11.88 x 8.72 x
0.84 in1
30.17 x 22.14 x
2.13 cm (301.7 x
221.4 x 21.3 mm)
11.88 x 8.72 x
0.84 in
34.89 x 22.14 x
3.12 cm (348.9 x
221.4 x 31.2
mm)
13.74 x 8.72 x
1.23 in
34.89 x 22.14 x
2.13 cm (348.9 x
221.4 x 21.3 mm)
13.74 x 8.72 x
0.84 in
34.89 x 22.14 x
2.13 cm (348.9 x
221.4 x 21.3
mm)
13.74 x 8.72 x
0.84 in
30.17 x 22.14 x
2.13 cm (301.7 x
221.4 x 21.3 mm)
11.88 x 8.72 x
0.84 in
Optional integrated
Smart Card Reader
Optional integrated
Barcode Scanner
HP Engage Go Convertible System
c06102151 — DA – 16297 Worldwide — Version 22 — July 22, 2021
Fingerprint reader
access
Rear camera and
LED access
Docking connector
access (HP Engage
Go Dock pogo pin)
Side barcode
scanner buttons
Rear barcode
scanner buttons
Rotating
Hingeable and detachable
Release latch
Shoulder strap included with each jacket unit
Two attach points on jacket
PED Caddy for Ingenico iSMP4
Pogo pin interface with Ingenico PEDs for single-charging and USB data transfer capability
Release button for detaching PED from caddy
Ability to lock PED into caddy via security screw
* PED Caddy only available for 5LX96AA and 5LX97AA
Black color only
Pen loop
NOTE 1: measurements without PED caddy
• Windows® 10 Pro 64, Windows® 10 IoT Enterprise 2016 LTSB 64-Value, Windows® 10 IoT Enterprise 2019 LTSC 64-bit,
FreeDOS, Android 8.1
• Intel® Kaby Lake Core™ and Pentium® processors
• Integrated Kaby Lake Premium PCH – integrated with CPU
• 12.3” diagonal capacitive multi-touch, WUXGA+ display
• M.2 2280 solid state drives
• Soldered down LPDDR3 1866 memory
• 4-cell long life polymer battery with HP Fast Charging
• 802.11ac Wi-Fi (2x2)
• Bluetooth® 4.2 connectivity (combo card with Wi-Fi)
• LTE/HSPA+ WWAN options available
(not available with barcode scanner)
• Optional integrated NFC, FPR and barcode scanner