Hobart UBS1 User Manual

Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
UB SERIES MEDIUM TEMPERATURE
FOOD EQUIPMENT
Exterior, Solar Powered Digital Thermometer is Standard on all Cabinets
Easily Removable Door Gasket without the Use of Tools
Hot gas condensate removal
R-22 Refrigerant
Non-Standard Solid Door Hinging Available at
No Extra Cost on solid doors
120/60/1 Units have Ten Foot Cord and Plug
OPTIONS
Flat Stainless Steel Top
Flat Stainless Steel Top with 4" backsplash
with electrical cutout
UNDERCOUNTER CABINETS
MODELS
UBS1 – Single Section UnitUBS2 – Two Section UnitUBS3 – Three Section Unit
ACCESSORIES:
CZW One standard plated wire shelf
BONUSSH 1STD26 One standard plated wire
bonus shelf
BONUSSH 1SST26 One SST bonus shelf
DRAWER-SHELF One standard plated wire
shelf for drawer bottom
Specifications, Details and Dimensions on Inside and Back
UB SERIES MEDIUM TEMPERATURE UNDERCOUNTER CABINETS
Solid Stainless Steel Door with Lock
(US models only)
5" Casters
6" leg set with flanged feet
4" Utility Base
R
Shown with optional flat stainless steel top
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
UB SERIES MEDIUM TEMPERATURE UNDERCOUNTER CABINETS
SELLING FEATURES
EASILY REMOVABLE GASKETS: Solid door gaskets are
easily removed without tools for cleaning or replacement, eliminating the expense of a service call.
WARRANTY: The UB series cabinet warranty is for one year. It includes parts, labor, and travel during normal working hours in the Continental United States.
REFRIGERATION SYSTEM: Unitized, serviceable from front, and located at left side of cabinet, consisting of:
Motor-Compressor, high starting torque, hermetic rated as follows:
1 Section
2 Section
3 Section
Condenser fan and fan motor.
Heavy duty condenser, copper and aluminum
designed to match motor compressor rating.
Evaporator coil large enough to match motor- compressor rating and provide 0°F cabinet temperature.
Coil fan and fan motor.
Temperature control, thermostatic and adjustable
1
4 h.p. and rated 2200 BTU at 90°F ambient and 20°F evaporator temperature
1
4 h.p. and rated 2200 BTU at 90°F ambient and 20°F evaporator temperature
1
3 h.p. and rated 2600 BTU at 90°F ambient and 20°F evaporator temperature
FOOD EQUIPMENT
SPECIFICATIONS
UBS SERIES
Exterior: Front housing, ends and doors are No. 4 finish stainless steel. Front frame is extruded thermal plastic providing superior thermal break between the interior and exterior of the cabinet. Exterior top, back and bottom are galvanized steel.
Interior: Liner is crimped construction of No. 4 finish stainless steel with one piece ABS thermoplastic. Liner bottom is .029 inch stainless steel.
HARDWARE AND FITTINGS: Heavy-duty, bumper-type door handle positioned horizontally with cylinder locks. Drawer guides and roller are stainless steel. Each drawer is designed to accommodate two 12" x 20" x 4" deep pans (supplied by others). Door gaskets are of smooth high quality vinyl and are easily replaceable without the use of tools. Exterior digital thermometer is standard on all cabinets. 6" adjustable legs with stainless steel feet are available as accessories.
PLUMBING: No plumbing connections are required. Condensate water automatically evaporated from the top of the cabinet. Water drains from refrigeration coil to a corrosion-resistant plastic tray where evaporation is assisted by the condenser fan and heat from the corrosion-resistant discharge line.
INSULATION: Two inch, CFC Free Polyurethane foam, poured, expanded and bonded in place, completely filling all cavities between interior and exterior surfaces of the cabinet and doors.
3
8" radius bends. Door drums are of
Refrigeration inside cabinet is by fan circulated air
which is drawn up through vents in the cabinet side walls, passed through cooling coils, and returned to the cabinet through Hobart ceiling mounted cross-duct, to provide uniform cooling throughout the cabinet, regardless of the loading pattern.
Loading...
+ 2 hidden pages