Page 1
Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■1⁄3 H.P. Knife Drive Motor
■ Gauge Plate Interlock
■ Carriage System Interlock
■ Removable Carriage System
■ Contoured Carbon Steel Knife
■ Top Mounted Borazon Stone Sharpener
■ Poly V-Belt Drive System
■ Patented Belt Tensioner
■ Sanitary Anodized Aluminum Base
■ Permanently Mounted Ring Guard
■ Cleaning Leg
THE EDGE
™
SLICER
MODEL
❑ The Edge™ Slicer – 120/60/1, Manual Slicer and
12" Knife
Specifications, Details and Dimensions on Inside and Back.
■ Removable Product Deflector
■ Anodized Aluminum Carriage and Knife Cover
■ Rear Mounted Meat Grip
R
THE EDGE
F-39956 – The Edge™ Slicer Page 1 of 4
™
SLICER
Page 2
THE EDGE
™
SLICER
SOLUTIONS / BENEFITS
1
⁄3 H.P. Knife Drive Motor
Durability, performance
■ Reserve power runs at 370 rpm for optimum
results
Gauge Plate Interlock
Ease of cleaning
■ Gauge plate must be closed to remove carriage
for cleaning and cannot be opened when
carriage is removed
■ Protects knife edge during cleaning procedures
Carriage System Interlock
■ Will not remove if gauge plate indicator is
not closed
Removable Carriage System
Improves sanitation
■ Removable for complete cleaning and sanitation procedures
Contoured Carbon Steel Knife
Reduced cost of ownership, improved yield
■ Thin edge design improves yield
Top Mounted Borazon Stone Sharpener
Ease of use, improved sanitation
■ Single action sharpens and hones in just five
seconds
■ Removable and submersible for easy cleaning
and sanitation
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Poly V-Belt Drive System
Performance, durability, reduced maintenance
■ Design extends belt life while producing optimal
slicing results
■ Quieter operating slicer
■ More economical for service and repairs with
reduced parts and reduced service time
Sanitary Anodized Aluminum Base
Improved sanitation, labor savings
■ One piece base protects against possible
growth of bacteria
■ No cracks/crevices or bolt holes where product
can lodge and bacteria may grow
■ Easy cleanup and durable finish
Permanently Mounted Ring Guard
Protection
■ Protects knife during operation and cleaning
Cleaning Leg
Improved sanitation, ease of use
■ Props machine for easy cleaning underneath
slicer
Removable Rear Deflector
Improved sanitation, ease of use
■ Allows access for thorough cleaning
■ No tools required means easy removal during
cleaning
Anodized Aluminum Carriage and Knife Cover
Improved sanitation, durability
■ Maximum sanitation with minimum cleanup
time
■ Corrosion resistant, impact resistant
Page 2 of 4 F-39956 – The Edge™ Slicer
Page 3
THE EDGE
™
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS
KNIFE MOTOR: 1⁄3 H.P., permanently lubricated ball
bearings. Single phase capacitor-start, induction run.
3.5 AMP
GAUGE PLATE INTERLOCK: Gauge plate interlock
protects knife edge when indicator is closed.
CARRIAGE SYSTEM INTERLOCK: Carriage will not
remove if gauge plate not closed.
REMOVABLE CARRIAGE SYSTEM: Positive angle
carriage design enables operator to slice without
manual feed. The anodized aluminum carriage
system is removable for thorough cleaning and
sanitation procedures. The carriage has 93⁄4" manual
travel.
CONTOURED CARBON STEEL KNIFE: Carbon
steel, 113⁄4" diameter with sanitary hub. Knife is
protected by a permanently mounted ring guard.
The anodized aluminum knife cover provides easy
access for cleaning. Gauge plate protects knife edge
when indicator is closed.
TOP MOUNTED BORAZON STONE SHARPENER:
One lever operation utilizing two Borazon stones to
sharpen and hone in five seconds. Removable and
top mounted. When sharpener is removed for
cleaning, knife edge is shielded.
POLY V-BELT DRIVE SYSTEM: Knife is driven by
a Poly V belt and runs at 370 rpm for optimal
performance. Aluminum knife shaft pulley and steel
motor pulley.
SLICER
PERMANENTLY MOUNTED RING GUARD:
Permanently mounted ring guard with integrated
product deflector protects knife during operation and
cleaning.
CLEANING LEG: Cleaning leg supports the slicer in
tilted position for cleaning beneath the machine.
REMOVABLE REAR DEFLECTOR: No tools are
required for removal of the deflector for thorough
cleaning of the slicer.
FINISH: Anodized aluminum carriage, gauge plate,
knife cover and base.
MEAT GRIP: Rear mounted grip is anodized
aluminum. Swings out of way when not in use.
ELECTRICAL SPECIFICATIONS: 120/60/1 –
UL Listed.
SWITCH: Moisture protected toggle type.
CORD & PLUG: 6-foot, three-wire power supply
cord and plug.
CAPACITY: The carriage will take food up to 71⁄4" in
width or 73⁄4" in diameter.
GAUGE PLATE: Gauge plate is a heavy anodized
aluminum casting with ribbed face for smooth
feeding. Adjustable to cut any thickness of slice up
to 5⁄8".
WARRANTY: All parts and service coverage for one
year including knife.
SANITARY ANODIZED ALUMINUM BASE:
One-piece base protects against possible growth
of bacteria. All surfaces are durable and smooth,
presenting no holes or crevices in which food can
lodge. Easy clean-up and durable finish to withstand
harsh cleaning products.
F-39956 – The Edge™ Slicer Page 3 of 4
WEIGHT: Shipping 83 lbs., Net 63 lbs.
Page 4
THE EDGE
™
SLICER
DETAILS AND DIMENSIONS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 4 of 4 F-39956 – The Edge™ Slicer
F-39956 (REV. 6/04) LITHO IN U.S.A. (H-01)
Printed On Recycled Paper
Loading...