Hobart PD35, PD70 General Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

PD35-PD70

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

Hobart Power Drive units provide a convenient,
compact power source to efciently run the Hobart
9" Vegetable Slicer attachment. It is an ideal
“attachment station” for slicing, shredding and
grating food product. It allows you to avoid using
food machines required for other operations.

STANDARD FEATURES

■ 1⁄2 H.P. Motor

■ 350 RPM (PD35) – Use with 9" Vegetable Slicer

Attachment Only (For Cheese and Vegetables)

■ 700 RPM (PD70) – Use with 9" Vegetable Slicer
Attachment Only (For Vegetables Only)

■ Stainless Steel Housing

■ Satin Finish Stainless Steel Cover

■ No. 12 Size Hub

POWER DRIVE UNIT

MODELS

❑ PD35 – 350 RPM Power Drive Unit, 115/60/1
❑ PD70 – 700 RPM Power Drive Unit, 115/60/1

Specications, Details and Dimensions on Reverse Side.

■ Poly-V Belt Transmission

■ Hardened Steel Output Shaft

■ Cast Aluminum Legs on Neoprene Pads

■ Six Foot 3-wire Cord and Plug

PD35-PD70 POWER DRIVE UNIT

F-8341 – PD35-PD70 Power Drive Unit Page 1 of 2

PD35-PD70
POWER DRIVE UNIT

SPECIFICATIONS

MOTOR: 1⁄2 H.P., fan cooled, permanently lubricated ball

bearings, capacitor start, induction run, totally enclosed
within the machine.

ELECTRICAL: 115/60/1

SWITCH: Manual 2-pole type with integral seal.

CORD & PLUG: 6 foot 3-wire cord and grounding type plug.

TRANSMISSION: Wide Poly-V belt running on steel drive

and cast aluminum driven pulleys. Output shaft hardened
steel, mounted in sealed grease-packed needle bearings.

HOUSING: Stainless steel cover secured to heavy painted
steel frame.

DETAILS AND DIMENSIONS

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

ATTACHMENT MOUNTING: Heavy cast iron hub, No. 12
size; accepts the No. 12 9" Vegetable Slicer secured by
heavy duty thumb screw.

OUTPUT: Model PD35 operates at 350 RPM and model
PD70 operates at 700 RPM. Both are suited for driving the
9" Vegetable Slicer.

MOUNTING: Equipped with cast aluminum legs on
neoprene pads. Two mounting positions are provided for
the extended front legs.

FINISH: Satin nish stainless cover, bright chrome
attachment hub, gray nish steel frame.

WEIGHT: Net 59 lbs.; Shipping 65 lbs.

As continued product improvement is a policy of Hobart, specications are subject to change without notice.

Page 2 of 2 F-8341 – PD35-PD70 Power Drive Unit

F-8341 (REV. 05/08) LITHO IN U.S.A. (H-01)