■ Easily removable door gasket without the use
of tools
■ Non-standard door hinging available at no
extra cost
■ Thermal vinyl door frame design that allows
replacement of perimeter door heaters, should
it be necessary, which reduces operating costs
– medium temperature
■ Thermal vinyl door frame that eliminates the
requirement for perimeter door heaters which
reduces operating costs – frozen food
■ 120/60/1 units have ten foot cord and plug
MODELS
❑ NQ1 – Single Section Refrigerator Unit
❑ NQ2 – Two Section Refrigerator Unit
❑ NQF1 – Single Section Freezer Unit
❑ NQF2 – Two Section Freezer Unit
OPTIONS (Continued)
❑ CZWSET-NQSTD – standard wire shelf set with
stainless steel clips
❑ CHZWSET-NQ – heavy duty wire shelf set with
stainless steel clips
❑ CZWPULL-NQ – pull out slide (pair) with one
plated wire shelf
❑ SCCPULL-NQ – pull out slide (pair) with one
stainless steel wire shelf
❑ UQSLIDE-CUS – universal slide – 18" x 26" or
14" x 18" pans, or 12" x 20" pans
Specifications, Details and Dimensions on Inside and Back.
NQ SERIES MEDIUM TEMPERATURE/FROZEN FOOD NARROW REACH-INS
NQ SERIES MEDIUM TEMPERATURE/
FROZEN FOOD NARROW REACH-INS
SELLING FEATURES
DOWN DUCT AIR DISTRIBUTION SYSTEM:
Ensures consistent cabinet temperatures.
EASILY REMOVABLE GASKETS: Solid door
gaskets are easily removed without tools for
cleaning or replacement, eliminating the expense
of service call.
FIELD REHINGEABLE DOOR: Maximum flexibility
for layout changes.
WARRANTY: The NQ series cabinet warranty is for
two years. It includes parts, labor, and travel during
normal working hours in the Continental United
States.
REFRIGERATION SYSTEM: Unitized and located
on top of the cabinet consisting of:
Motor-Compressor, high starting torque, hermetic
rated as follows:
Refrigerators:
1 Section - 1⁄4 H.P. and rated 2200 BTU at 90°F
ambient and 20°F evaporated temperature.
2 Section - 1⁄4 H.P. and rated 2200 BTU at 90°F
ambient and 20°F evaporator temperature.
Frozen Food:
1 Section - 1⁄2 H.P. and rated 1800 BTU at 90°F
ambient and -10°F evaporated temperature.
2 Section - 3⁄4 H.P. and rated 3150 BTU at 90°F
ambient and -10°F evaporator temperature.
FOOD EQUIPMENT
Condenser fan and fan motor.
Heavy duty condenser, copper and aluminum
designed to match motor compressor rating.
R-22 Refrigerant and non-CFC polyurethane foam
insulation.
R-502 Refrigerant for frozen food.
Coil fan and fan motor.
Temperature control.
Refrigeration inside cabinet is by fan circulated
air which is drawn up through vents in the ceiling,
passed through cooling coils, and returned to the
cabinet through Hobart louvered down-duct(s) that
provide uniform cooling throughout the cabinet,
regardless of the loading pattern.
finish stainless steel. Front frame is extruded thermal
plastic providing superior thermal break between the
interior and exterior of the cabinet eliminating the need
for anti-condensate heaters. Exterior top, back and
bottom are galvanized steel.
Interior: Liner is crimped construction of No. 4 finish
stainless steel with 3⁄8" radius bends. Door drums are
of one piece ABS thermoplastic.
HARDWARE AND FITTINGS: Heavy-duty, bumpertype door handle positioned horizontally with cylinder
locks. Positive action door hinged mechanism fitted
with stops, are chromium plated and are mounted to
reveal full door opening when door is open past
90 degrees. Door stays open at 105 degrees, and self
closes at less than 90 degrees. Solid doors are field
rehingeable.
Door gaskets are of smooth, high quality vinyl and are
easily replaceable without the use of tools. Exterior,
solar powered, digital thermometer is standard on all
cabinets.
Standard 3 wire 10 foot cord and plug on 120 volt
models.
6" adjustable legs with stainless steel feet are
standard.
Three wire shelves per section are steel plated and
sealed. Available as accessories with bonus shelves for
between door areas. Shelf adjustment is on 1" centers.
INSULATION: CFC Free Polyurethane foam, poured,
expanded and bonded in place, completely filling all
cavities between inner and exterior surfaces of the
cabinet and doors.
Mean Daily Energy Consumption (KWHR) tested to
ANSI/AHRAE 117: NQ1 = 6.04.
OPTIONS:
❑ Casters
❑ Flanged feet
❑ Utility base
❑ Half height solid doors
❑ Stainless steel clad back
❑ Stainless steel heat barrier(s)
❑ Wall mounting bracket
❑ High capacity refrigeration system – medium
temperature
❑ High humidity refrigeration system – medium
temperature
❑ Remote units (condensing unit by others)
❑ Electrical connection at bottom of cabinet
❑ Fluorescent lighting
❑ Upper trim modified for soffit installation
❑ 6" legs with stainless steel feet
❑ CZWSET-NQSTD – standard wire shelf set with
stainless steel clips
❑ CHZWSET-NQ – heavy duty wire shelf set with
stainless steel clips
❑ CZWPULL-NQ – pull out slide (pair) with one
plated wire shelf
❑ SCCPULL-NQ – pull out slide (pair) with one
stainless steel wire shelf
❑ UQSLIDE-CUS – universal slide – 18" x 26" or
14" x 18" pans, or 12" x 20" pans
PLUMBING: No plumbing connections are required.
Condensate water automatically evaporated from the
top of the cabinet. Water drains from refrigeration coil
to a corrosion-resistant plastic tray where evaporation
is assisted by the condenser fan and heat from the
corrosion-resistant discharge line.
NQ SERIES MEDIUM TEMPERATURE/
FROZEN FOOD NARROW REACH-INS
FOOD EQUIPMENT
DETAILS AND DIMENSIONS
ELECTRICAL DATANQ1NQF1NQ2NQF2
Horsepower
1
⁄4
RefrigerantR-22R-502R-22R-502
Standard Voltage120/60/1
Maximum Watts8708808701190
Maximum Amps8.610.18.616.0
PHYSICAL DATA12
Interior Dimensions59.2"H x 29.2"D x 20.0"W59.2"H x 29.2"D x 44"W
Net Cubic Feet Capacity20.144.1
Depth over Hardware
Front Opening35"35"
Depth over Open Doors
Front Opening553⁄8"55
Net Door Opening Height581⁄2"58
Net Door Opening Width19"19"
Approximate Shipping Weight270 lbs.445 lbs.
ELECTRICAL SYSTEMS
Refrigerators:
1 Section: Condensing unit
2 Section: Condensing unit
Frozen Food:
1 Section: Condensing unit
2 Section: Condensing unit
1
⁄4 H.P. and consumes 630 watts at 6.6 amps. Maximum consumption is 870 watts at 8.6 amps.
1
⁄4 H.P. and consumes 630 watts at 6.6 amps. Maximum consumption is 870 watts at 8.6 amps.
1
⁄2 H.P. and consumes 640 watts at 8.7 amps. Maximum consumption is 880 watts at 10.1 amps.
3
⁄4 H.P. and consumes 950 watts at 13.5 amps. Maximum consumption is 1190 watts at 16.0 amps.
1
⁄2
1
⁄4
3
⁄4
3
⁄8"
1
⁄2"
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.