Hikvision DS-K1T671 User Manual

Hikvision DS-K1T671 User Manual

DS-K1T671 Series Face Recognition Terminal

Quick Start Guide

UD15607B-A

© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its a liates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Data Protection

During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image.

As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the e ectiveness of your security controls.

Scan the QR code to get the user manual for detailed information.

Note that mobile data charges may apply if Wi-Fi is unavailable.

Use only power supplies listed in the user instructions:

Model

Manufacturer

Standard

C2000IC12.0-24P-DE

MOSO Power Supply Technology Co., Ltd.

CEE

C2000IC12.0-24P-GB

MOSO Power Supply Technology Co., Ltd.

BS

ADS-24S-12 1224GPG

Shenzhen Honor Electronic Co., Ltd.

CEE

1 Installation

Installation Environment:

Indoor and outdoor installation are supported. If installing the device indoors, the device should be at least 2 meters away from the light, and at least 3 meters away from the window or the door. If installing the device outdoors, you should apply Sililcone sealant among the cable wiring area to keep the raindrop from entering.

Make sure the environment illumination is more than 100 Lux.

10Lux

100~850Lux

1200Lux

2m

3m

 

Backlight

Direct Sunlight

Close to Light

Indirect Sunlight

Direct Sunlight

through Window

through Window

Before you start:

According to the baseline on the mounting template, stick the mounting template on the wall or other surface, 1.4 meters higher than the ground.

Make sure the output of external power supply fulfils LPS.

Steps:

1Drill holes on the wall or other surface according to the mounting template and install the gang box.

2Use two supplied screws (4_KA4×22-SUS) to secure the mounting plate on the gang box. Use another four supplied screws to secure the mounting plate on the wall.

Route the cables through the cable hole of the mounting plate, and connect to the corresponding external devices’ cables.

Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.

3 Insert the fingerprint module to the holes at the bottom of the main part. 4 Align the device with the mounting plate and hang the terminal on the

mounting plate.

5 Make sure the two sheets on each side of the mount plate have been in the holes at the back of the device.

Use two supplied screws (SC-M4×12TP10-SUS) to secure the device and the mounting plate.

Apply

 

Silicone

The installation height here is the recommended height. You can change it according

sealant

to your actual needs.

 

You can also install the device on the wall or other places without the gang box. For

 

details, refer to the User Manual.

 

For easy installation, drill holes on mounting surface according to the supplied

 

mounting template.

87 mm

Hole1

 

Hole1

 

Mounting Template

 

Datum

 

 

4

 

 

 

Recommended Height:1.40 m.

 

 

 

 

<![if ! IE]>

<![endif]>8.196

5

 

Hole2

2

 

 

 

1

 

 

<![if ! IE]>

<![endif]>mm

 

Hole2

Hole3

Hole2

 

 

 

 

3

Hole1

Hole2 Hole1

 

2.1 Device Wiring (Without Secure Door Control Unit

When connecting door magnetic sensor and exit button, the device and the

 

RS-485 card reader should use the common ground connection.

 

The Wiegand terminal here is a Wiegand input terminal. You should set

 

the face recognition terminal’s Wiegand direction to “Input”. If you should connect

 

to an access controller, you should set the Wiegand direction to “Output”. For details,

 

see Setting Wiegand Parameters in Communication Settings in the user manual.

 

The suggested external power supply for door lock is 12 V, 1A.

Network Interface

The suggested external power supply for Wiegand card reader is 12 V, 1 A.

 

Do not wire the device to the electric supply directly.

 

Dimensions:

 

 

IR Light

IR Light

USB Interface

116.5 mm

33 mm

White Light

 

 

Camera

 

 

<![if ! IE]>

<![endif]>290 mm

 

 

Screen

 

 

Card Presenting

 

 

Area

 

 

Fingerprint

 

 

Scanner

SIM Card Card Slot

 

 

 

(Reserved)

Network

 

Debugging

 

Port

Interface

 

(For debugging

 

 

only)

Power

Interface

 

PSAM Card

Wiring

5

Card Slot

Terminal

(Reserved)

 

 

The figures are for reference only.

 

 

(NC)

 

(COM)

 

(NO)

BTN

Door Contact

 

2.2 Device Wiring (With Secure Door Control Unit

Face Recognition Terminal

 

 

 

 

 

 

 

 

Secure Door Control Unit

 

 

 

 

 

 

 

 

 

 

 

 

Power Input

 

 

 

 

 

 

 

 

Red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black

Door Contact

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensor Input

 

 

 

 

SENSOR

 

B1

Green/Brown

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B2

Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Secure Door

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Exit Button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Unit

 

 

 

 

 

 

 

 

BUTTON

 

 

Green/Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wiring Terminal

 

Exit Button

 

 

 

 

 

 

B3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White/Purple

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NC

C1

 

 

 

NC

 

 

 

Electric

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White/Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lock Output

 

 

NO

C2

White/Red

 

 

 

 

 

 

 

 

 

 

 

 

Dropbolt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C3

 

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electric

Strike

NO

The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12 V, 0.5 A.

3 Activation

Power on and wire the network cable after installation. You should activate the device before the first login.

If the device is not activated yet, it will enter the Activate Device page after powering on.

Steps:

1.Create a password and confirm the password.

2.Tap Activate to activate the device.

For other activation methods, see the device user manual.

STRONG PASSWORD RECOMMENDED–

We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

4 Two-way Audio

After adding the device to the client software, you can call the device from the client software, call the client software from the device, call the center from the device, or call the indoor station form the device.

Call Client Software from Device

After adding the device on the client software, tap -> , and tap Answer on the pop-up window on the client software to start two-way audio.

If the device is added by multiple client softwares and when the device is calling the client software, only the first client software added the device will pop up the call receiving window.

Call Center from Device

After adding the device and center on the client software, tap -> to call the center. When the center answers the call, you can start two-way audio.

The device will call the center in priority when tap the administrator icon.

Call Device from Client Software

After adding the device on the client software, you can enter the Live View page. Right click the live view window and click Start Two-Way Audio to start two-way audio.

Call Indoor Station from Device

After adding the device and the indoor station on the client software, link the added user and the added indoor station, and set a room No. for the indoor station.

Tap and enter the room No. And tap OK to call the indoor station.

5 Adding Face Information

1.Use finger to hold the screen surface and enter the activation password to enter the main page.

2.Enter the User Management page, tap + to enter the Add User page.

Only the devices with the fingerprint module support the fingerprint related functions.

4.Tap Face and collect the face information according to the instructions.

You can view the captured picture at the upper right corner of the page. Make sure the face picture is in good quality and size. For details about the tips and positions when collecting or comparing the face picture, see the contents on the right.

5.If the picture is in good condition, tap Save to save the picture. Or tap Try Again to take another face picture.

6. Tap to save the settings.

Go back to the initial page to start authentication.

For other authentication methods, see the device user manual.

Recommended:

Use other authentication methods if the device if a ected by the light or other items.

1:1 Matching: The device will compare the captured face picture with the ones in the database.

1:N Matching: The device will compare the captured face picture with the user linked face picture.

Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

Tips When Collecting/

Comparing Face Picture

Expression

Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture on the right.

Do not wear hat, sunglasses, or other accessories that can

a ect the facial recognition function.

Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.

Posture

In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures.

Correct

Tilt

Side

Raise

Bow

Size

Make sure your face is in the middle of the collecting window.

Correct

Too Close

Too Far

Too

Too

Close Correct

Far

 

Height:

 

1.43m to 1.90m

1.4m

Move

 

 

Back and Forth

0.5m

 

Positions When Collecting/

Comparing Face Picture

(Recommended Distance: 0.5m)

Recommended Height:

Too High

 

1.43m to 1.90m

 

 

 

 

Too Low

1.4m

1.4m

 

0.5m

 

5m

Too Close

1.4m

0.5m

Too Far

1.4m

1.2m

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recycle- this.info

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local region.

Please use the power adapter, which is provided by normal company. The power

consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. Please make sure that the power has been disconnected before you wire, install or dismantle the device. When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the device, turn o the power at once and unplug the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

Cautions

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose

it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and a ecting the endurance of sensor at the same time.

Please use the provided glove when open up the device cover, avoid direct contact

with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.

Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

Indoor use. If installing the device indoors, the device should be at least 2 meters

away from the light, and at least 3 meters away from the window or the door.

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited

Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard.

Please refer to technical specifications for detailed information.

Loading...