Gigabyte GV-N68T256D Manual

0 (0)

Jul. 21, 2004

VGA Card

GV-N68T256D

VGA Card

Jul. 21, 2004

GV-N68T256D

User's Manual

GeForce

™

6800 GT Graphics Accelerator

Rev. 101

12MD-N68T256D-101

any from without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card.

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make

a commitment to update the information contained herein.

GV-N68T256D Graphics Accelerator - 2 -

English

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirement .................................................................. 3

2. Hardware Installation...........................................................................4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation .................................................................................. 6

3. Software Installation ............................................................................8

3.1. Win

XP Driver and Utilities Installation ...................................................... 8

3.1.1. Operating System Requirement ....................................................................................... 8

3.1.2. DirectX Installation ............................................................................................................ 9

3.1.3. Driver Installation ............................................................................................................. 11

3.1.4. Utilities on Driver CD ...................................................................................................... 13

3.1.5. Taskbar Icon .................................................................................................................... 15

3.1.6. Display Properties Pages ............................................................................................... 18

3.1.7. nView Properties Pages ................................................................................................. 23

3.2. Win

2000 Driver Installation .................................................................... 28

3.3. BIOS Flash Utility ..................................................................................... 28

4. Troubleshooting Tips .........................................................................29

5. Appendix ...........................................................................................30

5.1. How to Reflash the BIOS .......................................................................... 30

5.1.1. Reflash BIOS in MS-DOS mode .................................................................................... 30

5.1.2. Reflash BIOS in Windows mode .................................................................................... 30

5.2. Resolutions and Color Depth Table (In Windows

XP) ............................. 31

Introduction- 3 -

English

1. Introduction

1.1. Features

• Powered by NVIDIA

GeForce

™

6800 GT Graphics Processing Unit (GPU)

• Supports the new AGP 8X

• Integrated with 256MB DDR III memory

• Supports DirectX 9.0

• Supports TV-Out and D-Sub connectors

• Supports DVI-I connector

1.2. Minimum System Requirement

• IBM

or 100% PC compatible with Pentium

III 650MHz or AMD Athlon 650MHz

class processor or higher

• One available AGP3.0 compliant slot or better

• Operating Systems Win

2000 / Win

• 64MB system memory

• 50MB of available disk space for full installation

• CD-ROM or DVD-ROM drive

GV-N68T256D Graphics Accelerator - 4 -

English

2. Hardware Installation

2.1. Board Layout

TV-Out

DVI-I Connector

VGA Monitor Connector

(15 pins)

S-Video

VGA Monitor

Connector

(15pin)

DVI-I Connector

Analog LCD Monitor

Analog Monitor

VGA Output

Analog LCD Monitor

Digital LCD Monitor

DVI Output

VGA Output

NTSC / PAL TV

Projector

AV Output

S-VideoOutput

DVI-I to D-Sub Connector

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow

some precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not

have one, touch both of your hands to a safely grounded object or to a metal object,

such as the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by

static electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-

static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-N68T256D Graphics Accelerator - 6 -

English

2.2. Hardware Installation

Installing Your graphics card.

Now that you have prepared your computer, you are ready to install your graphics

accelerator card.

To install your graphics accelerator card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help

in removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to

disable it on the motherboard. For more

information, see your computer

documentation.

Hardware Installation- 7 -

English

You are now ready to proceed with the installation of the graphics card driver. For detailed

instructions, select your operating system from the list below.

4. Locate the AGP slot. If necessary, remove

the metal cover from this slot; then align

your graphics card with the AGP slot, and

press it in firmly until the card is fully

seated.

5. Replace the screw to fasten the card in

place, and replace the computer cover.

After installation, please connect the power cable to your

GV-N68T256D graphics card, or the system will not boot.

To TV or VCR

6. Plug the display cable into your card; then

turn on the computer and monitor. If your

graphics card came with a DVI-I connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

GV-N68T256D Graphics Accelerator - 8 -

English

3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Win

2000 / Win

XP drivers is very simple. When you insert the driver

CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show up,

run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.

(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics

accelerator.)

3.1. Win

XP Driver and Utilities Installation

3.1.1. Operating System Requirement

• When loading the graphics card drivers for the system, please make sure your

system has installed DirectX 9 or later version.

• If you install the graphics card drivers for the motherboard, which consist of SIS or

VIA chipsets, please install the appropriate driver program for that motherboard.

Or please contact your motherboard nearest dealer for motherboard driver.

Software Installation- 9 -

English

3.1.2. DirectX Installation

Install Microsoft DirectX to enable 3D hardware acceleration support for Windows

2000

or Windows

XP to achieve better 3D performence.

0 Note: For software MPEG support in Windows

2000 or Windows

XP, you must

install DirectX first.

Click "Install DirectX 9" item.

Step 2. Choose I accept the agreement and

Click "Next" button.

Step 3. Click "Next" button.

Step 1. When autorun window show up,

click Install DirectX 9 item.

GV-N68T256D Graphics Accelerator - 10 -

English

Step 4. Click "Finish" to restart computer.

Then the DirectX 9 installation is completed.

Installing the components.

+ 28 hidden pages