General Semiconductor GLL4739, GLL4738, GLL4737, GLL4736, GLL4735 Datasheet

GLL4735 THRU GLL4763A

SURFACE MOUNT GLASS PASSIVATED ZENER

Zener Voltage - 6.2 to 91.0 Volts		Steady State Power - 1.0 Watt

DO-213AB

SOLDERABLE ENDS

1st BAND

												D1=
				D2
							0.105
											0.095
							(2.67)
												(2.41)
		0.022 (0.56)
		0.018 (0.46)										D2 = D1						+ 0
0.205 (5.2)																		- 0.008 (0.20)
0.185(4.7)

1st band denotes type and positive end (cathode)

Dimensions are in inches and (millimeters)

FEATURES

♦Plastic package has Underwriters Laboratory Flammability Classification 94V-0

♦For surface mounted applications

♦Glass passivated chip junction

♦Low zener impedance

♦Low regulation factor

♦High temperature soldering guaranteed: 250°C/10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO-213AB molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750,

Method 2026

Polarity: Red band denotes Zener diode and positive end (cathode)

Mounting Position: Any

Weight: 0.0046 ounce, 0.116 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

OPERATING JUNCTION AND STORAGE TEMPERATURE RANGE: TJ, TSTG: -55°C to +150°C

	NOMINAL
	ZENER			MAXIMUM DYNAMIC						MAXIMUM	MAXIMUM
	VOLTAGE				IMPEDANCE			MAXIMUM DC REVERSE		ZENER	FORWARD
	AT IZT	TEST						LEAKAGE CURRENT		CURRENT	VOLTAGE
TYPE	(NOTE 1)	CURRENT	ZZT at							(NOTE 2)	at 200mA
	VZ	IZT	IZT		ZZK at IZK		IZK	IR	VR	IZM	VF
	(Volts)	(mA)	(Ohms)		(Ohms)		(mA)	( A)	(Volts)	(mApk)	(Volts)
GLL4735	6.2	41.0	2.0		700		1.0	50.0	3.0	730.0	1.2
GLL4736	6.8	37.0	3.5		700		1.0	10.0	4.0	660.0	1.2
GLL4737	7.5	34.0	4.0		700		0.5	10.0	5.0	605.0	1.2
GLL4738	8.2	31.0	4.5		700		0.5	10.0	6.0	550.0	1.2
GLL4739	9.1	28.0	5.0		700		0.5	10.0	7.0	500.0	1.2
GLL4740	10	25.0	7.0		700		0.25	10.0	7.6	454.0	1.2
GLL4741	11	23.0	8.0		700		0.25	5.0	8.4	414.0	1.2
GLL4742	12	21.0	9.0		700		0.25	5.0	9.1	380.0	1.2
GLL4743	13	19.0	10.0		700		0.25	5.0	9.9	344.0	1.2
GLL4744	15	17.0	14.0		700		0.25	5.0	11.4	305.0	1.2
GLL4745	16	15.5	16.0		700		0.25	5.0	12.2	285.0	1.2
GLL4746	18	14.0	20.0		750		0.25	5.0	13.7	250.0	1.2
GLL4747	20	12.5	22.0		750		0.25	5.0	15.2	225.0	1.2
GLL4748	22	11.5	23.0		750		0.25	5.0	16.7	205.0	1.2
GLL4749	24	10.5	25.0		750		0.25	5.0	18.2	190.0	1.2
GLL4750	27	9.5	35.0		750		0.25	5.0	20.6	170.0	1.2
GLL4751	30	8.5	40.0		1000		0.25	5.0	22.8	150.0	1.2
GLL4752	33	7.5	45.0		1000		0.25	5.0	25.1	135.0	1.2
GLL4753	36	7.0	50.0		1000		0.25	5.0	27.4	125.0	1.2
GLL4754	39	6.5	60.0		1000		0.25	5.0	29.7	115.0	1.2
GLL4755	43	6.0	70.0		1500		0.25	5.0	32.7	110.0	1.2
GLL4756	47	5.5	80.0		1500		0.25	5.0	35.8	95.0	1.2
GLL4757	51	5.0	95.0		1500		0.25	5.0	38.8	90.0	1.2
GLL4758	56	4.5	110.0		2000		0.25	5.0	42.6	80.0	1.2
GLL4759	62	4.0	125.0		2000		0.25	5.0	47.1	70.0	1.2
GLL4760	68	3.7	150.0		2000		0.25	5.0	51.7	65.0	1.2
GLL4761	75	3.3	175.0		2000		0.25	5.0	56.0	60.0	1.2
GLL4762	82	3.0	200.0		3000		0.25	5.0	62.2	55.0	1.2
GLL4763	91	2.0	250.0		3000		0.25	5.0	69.2	50.0	1.2

NOTES:

(1)Standard voltage tolerance is ±10%, Suffix A = ±5%

(2)Surge current is a non-repetitive, 8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method

(3)Maximum steady state power dissipation is 1.0 watt at TT=75°C

1/20/99