PFIC1NFZ
GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Dimensions and Installation Information (in inches)
|
Height to top of hinge (in.) A |
69-5/8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Height to top of case (in.) B |
69 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Overall Dimensions |
Case depth without door (in.) C |
23-7/8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Case depth less door handle (in.) D |
26-3/4* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Case depth with door handle (in.) E |
31 |
|
|
|
|
|
|
|
|
A |
|
B |
||||
|
|
|
|
|
||||
|
Depth with fresh food door open 90° (in.) F |
43-1/2 |
||||||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Width (in.) G |
35-7/8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Width with door open 90° inc. door handle (in.) H |
44 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Air Clearances |
Each side (in.) |
1/8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back (in.) |
1/2 |
|
|
|
|
|
|
|
|
Top (in.) |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: |
|
|
Anti-tip bracket part number 200D8494P001 will be shipped with |
||
every counter-depth model |
Installation of water outlets |
|
*Does NOT include a decorative panel |
||
|
1/2"
Alternate water
line location through floor
H
G
C
D |
E |
F
Top View
Above illustration intended for dimensional Front View reference only. Refer to photography for
actual product appearance.
Recommended single loop of 1/4" pex water line
Allow 48" minimum water
line to enable refrigerator 24" to be pulled forward
Water hook-up
on the refrigerator IMPORTANT: Before finalizing specifications for your GE Profile counter-depth refrigerator, please NOTE:
• A minimum width of 36" is required for refrigerator installation
•Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum
For answers to your Monogram,® GE Profile™ or |
Top View |
18" |
GE® appliance questions, visit our website at |
Recommended water line |
|
|
location using recess |
|
geappliances.com or call GE Answer Center® |
|
in rear wall |
|
Rear Wall View |
|
service, 800.626.2000. |
|
|
|
|
Listed by
Underwriters
Laboratories
Specification Created 1/10 |
210820 |
PFIC1NFZ
GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Dimensions and Installation Information (in inches)
Order your own custom wood panels to match cabinetry or other decor.
Panels up to 1/4" thick or panels with 1/4" thick flanges will fit into your new counter-depth refrigerator. Follow these patterns to ensure they will fit securely. Add filler behind panels (see below) to ensure they will not rattle.
Weight Limits: Total weight of panels—Fresh Food = 10 lbs. each, Freezer = 18 lbs. max.
Note: Panels up to 3/4" will require special routing area around handles.
Dimensions may vary depending on depth of panel.
Panels less than 1/4" thick
Left Fresh Food Door |
Right Fresh Food Door |
Filler |
Filler |
3/4 |
3/4 |
3/4 |
3/4 |
2-1/2 |
2-1/2 |
Panel |
Panel |
Freezer Door
Filler
3/4
2-1/2
Panel
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.
Dimensions for custom wood panels
Panels thicker than 1/4" |
1/4" Thick Backing |
|
5/16 |
|
|
|
|
2" Clearance |
|
|
|
Handle Side |
|
|
1/4" max. |
|
3/4 |
|
|
Appearance |
Refrigerator |
|
|
Panel |
|
|
3/4 |
|
Door |
|
|
|
|
|
1/8 |
Left Fresh Food Door |
Right Fresh Food Door |
1/8 |
1/4 |
5/16" |
minimum at |
1/4" |
thickness |
Top, right and |
bottom |
Raised portion |
of panel |
1/8 |
16-29/32 |
1/4 |
|
|
1/4 |
|
2" |
2" |
5/16" |
|
minimum at |
minimum at |
minimum at |
|
1/4" |
1/4" |
1/4" |
|
thickness |
thickness |
thickness |
|
Handle side |
Handle side |
Top, right and |
|
bottom |
|||
|
|
||
38-15/16 |
Raised portion |
38-15/16 |
|
|
|||
|
|
||
|
of panel |
|
|
|
|
1/8 |
|
|
|
16-29/32 |
|
|
|
1/4 |
2" minimum at |
Freezer Door |
1/4" thickness |
|
Handle side |
|
5/16" minimum |
|
at 1/4" thickness |
|
Left, right and |
26-3/32 |
bottom sides Raised |
|
portion |
|
of panel |
|
|
35-29/32 |
1/8 |
1/8 |
1/4 |
1/4 |
Listed by
Underwriters
Laboratories
Specification Created 1/10 |
210820 |