Tips & TricksTo access the contents of this guide while you are traveling,
download an electronic copy from
www.gateway.com/support/manlib/.
1
www.gateway.com
1
Chapter 1: Checking Out Your Gateway Solo 5350
Front
Speaker
Release
latch
Hot-swap
indicator
Power
indicator
Speaker
Battery
charge
indicator
ComponentIconDescription
SpeakersProvide audio output. Speakers are disabled while
headphones are connected.
Release latchOpen the notebook cover by sliding the release latch to the
right.
Hot-swap indicatorIndicates when it is safe to remove the bay module.
■
LED off - bay module is installed and functional, or the
module is uninstalled and it is safe to remove it. The LED
is normally off.
■
LED flashing green - the notebook is preparing the bay
module for swapping.
■
LED orange - the notebook has encountered an error
with the bay module.
For more information, see “Changing bay modules” on
page 142.
Power indicatorLights up when the notebook is turned on and shows
notebook power status:
■
Steady green light indicates that power is on and the
notebook is in operation.
■
Flashing green light indicates that the notebook is in
Standby mode.
■
Flashing green light accompanied by beeping indicates
the battery charge is low.
■
No light indicates that the notebook is off.
2
www.gateway.com
ComponentIconDescription
Battery charge indicatorIndicates the battery status:
■
Green light indicates that the battery is fully charged and
AC power is connected.
■
Orange light indicates that the battery is charging.
■
Red light indicates that the battery is low.
■
No light indicates that the system is running on the
battery because the AC adapter is either not connected
or is not providing power.
Front
www.gateway.com
3
Chapter 1: Checking Out Your Gateway Solo 5350
Left Side
Ethernet
jack
Ventilation fan
(do not block)
Line in jack
Speaker jack
Microphone jack
Modem jack
PC Card slots
PC Card
eject buttons
ComponentIconDescription
Ethernet jackPlug an Ethernet 10/100 network cable into this jack. For more
information, see “Connecting to an Ethernet network” on page 32.
Ventilation fanHelps cool system components. Do not block.
Line in jackPlug an external audio input source (such as a stereo) into this jack
so that you can record sound on your notebook or play sound
through the notebook speakers.
Speaker jackPlug external speakers or headphones into this jack.
Microphone jackPlug a microphone into this jack. While the external microphone is
connected, the built-in microphone is disabled.
Modem jackPlug a modem cable into this jack. For more information, see
“Connecting the modem” on page 31.
PC Card slotsInsert Type I, II, or III PC Cards into these slots. For more
information, see “Adding PC Cards” on page 140.
PC Card eject
buttons
4
Press one of the eject buttons to remove a PC Card from a PC Card
slot. For more information, see “Adding PC Cards” on page 140.
www.gateway.com
Right Side
Module bayEject button
ComponentDescription
Module bayUse this bay for a second battery, or a CD, CD-RW, DVD, diskette, LS-120, or
second hard drive. For more information, see “Changing bay modules” on
page 142.
Eject buttonPress the eject button to open the module tray.
Right Side
www.gateway.com
5
Chapter 1: Checking Out Your Gateway Solo 5350
Back
PS/2
port
Kensington
lock slot
Parallel
port
TV out
jack
Docking
port
Monitor
port
USB
ports
Power
connector
Serial
port
ComponentIconDescription
Kensington™ lock slotSecure your computer to an object by connecting a
Kensington cable lock to this slot.
PS/2 portPlug a PS/2
keyboard or mouse) into this port.
Important! You will not be able to use your touchpad
while a mouse is plugged into this port.
Parallel portPlug a parallel device (such as a printer) into this port.
TV out jackPlug one end of a standard RCA cable into this jack and
the other end of the cable into the jack on a TV or VCR
so that you can view your computer screen on a TV.
For more information, see “Viewing the display on a
television” on page 96.
®
(Personal System/2) device (such as a
Docking portConnect an optional port replicator or docking station
to this port.
Warning! Power is passed through this connection.
This docking connection is UL certified for use only with
Solo 5350 docking station devices.
6
www.gateway.com
ComponentIconDescription
Monitor portPlug an external (VGA) monitor into this port.
USB portsPlug USB (Universal Serial Bus) devices (such as a
USB Iomega™ Zip™ drive, scanner, or camera) into
these port.
Serial portPlug a serial device (such as a digital camera) into this
port.
Power connectorPlug the AC power adapter cable into this connector.
Back
www.gateway.com
7
Chapter 1: Checking Out Your Gateway Solo 5350
Bottom
Module
bay
Module
bay
latch
Battery
latch
Main
battery
Battery
meter
Hard
drive
Memory
bay
System
label
ComponentIconDescription
Module bayUse this bay for a second battery, or a CD, CD-RW, DVD,
diskette, LS-120, or second hard drive. For more information,
see “Changing bay modules” on page 142.
Module bay latchSlide to release the module.
Battery latchSlide to release the battery.
Main battery bayInsert the main battery into this bay. For more information,
see “Changing batteries” on page 109.
Battery meterPress the white button to get the main battery charge level.
For more information, see “Monitoring the battery charge” on
page 106.
8
www.gateway.com
ComponentIconDescription
Hard driveThe hard drive is stored here. For more information, see
“Replacing the main hard drive” on page 150.
Memory bayInstall as many as two SO-DIMM memory modules into the
slots in this bay. For more information, see “Installing
memory” on page 146.
System labelIncludes the product model number and serial number. For
more information, see “Identifying your model” on page 12.
Bottom
www.gateway.com
9
Chapter 1: Checking Out Your Gateway Solo 5350
Keyboard area
Power button
Status
indicators
Keyboard
Microphone
Touchpad
ComponentDescription
Power buttonPress to turn the power on or off. For more information on configuring
the power button mode, see “Changing power settings” on page 114.
Status indicatorsSee “Status indicators” on page 23 for more information.
KeyboardSee “Using the keyboard” on page 24 for more information.
MicrophoneRecord audio through this microphone. The built-in microphone is
disabled while an external microphone is connected.
TouchpadSee “Using the EZ Pad touchpad” on page 28 for more information.
10
www.gateway.com
WarningRadio frequency wireless communication can interfere
with equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane. IEEE 802.11b (also known as
wireless Ethernet or WiFi) communication devices are
examples of devices that provide wireless communication.
ImportantIf your system came equipped with an internal radio
frequency wireless device, see “Safety, Regulatory, and
Legal Information” on page 281 for general wireless
regulatory and safety guidelines. To find out if your system
has an internal wireless device, check the label (see
“Identifying your model” on page 12).
Keyboard area
www.gateway.com
11
Chapter 1: Checking Out Your Gateway Solo 5350
Identifying your model
The label on the bottom of your computer contains information that
identifies your notebook model. Gateway Technical Support will need this
information if you call for assistance.
ImportantThe label shown below is for informational purposes only.
Label information varies by model.
Gateway model
number
Gateway serial
number
Gateway part
number
12
www.gateway.com
Accessories
Gateway offers accessories that can help you make the most of using your
notebook.
Batteries and automobile/airplane power adapters
If you run your notebook on battery power for extended periods, you may
want to buy an additional battery so that you can swap batteries when
necessary.
With an automobile/airplane power adapter, you can save battery power by
plugging your notebook into an automobile cigarette lighter or an airplane
in-flight power receptacle.
Carrying cases
Gateway has large-capacity carrying cases if you need additional space for
accessories or supplies.
Docking stations and port replicators
Although you can attach external devices directly to your notebook, a docking
station or port replicator lets you make all of those connections at once. When
you travel with your notebook, you merely disconnect from the docking
station or port replicator instead of unplugging all the external devices.
Accessories
A docking station or port replicator also provides additional ports and other
expansion features not included with your notebook.
External devices
You can attach external devices such as a keyboard, mouse, printer, or monitor
to your notebook, docking station, or port replicator.
Memory
Large programs, such as multimedia games or graphics programs, use a lot of
memory. If your programs are running more slowly than you think they
should, try adding more memory.
www.gateway.com
13
Chapter 1: Checking Out Your Gateway Solo 5350
Printers
You can attach many types of printers to your computer. The most common
types are inkjet and laser printers, which print in color or black and white.
Inkjet printers and cartridges are relatively inexpensive, but usually they are
slower than laser printers. Using an inkjet color printer, you can print pictures,
banners, and greeting cards, as well as documents.
Laser printers and cartridges are more expensive, but usually they print much
faster than inkjet printers. Laser printers are better than inkjet printers when
you are printing large documents.
14
www.gateway.com
Getting Started
This chapter provides basic information about your Gateway notebook. Read
this chapter to find out:
■ How to connect the AC power adapter
■ How to start and turn off your notebook
■ How to use the keyboard
■ How to use the EZ Pad™ touchpad
■ How to connect the modem
■ How to connect to an Ethernet network
■ How to install peripheral devices
2
www.gateway.com
15
Chapter 2: Getting Started
Connecting the AC adapter
You can run your notebook using an AC adapter or the notebook battery. The
battery was shipped to you partially charged. You should use the AC adapter
right away to fully charge the battery. Allow 24 hours for the battery to fully
charge.
ImportantIf the battery is not fully charged before you use your
notebook on battery power for the first time, the battery life
may be much shorter than you expect. If the battery life
seems short even after being charged for 24 hours, the
battery may need to be recalibrated. For more information,
see “Recalibrating the battery” on page 108.
To connect the AC adapter:
1 Connect the power cord to the AC adapter.
16
WarningReplace the power cord if it becomes damaged. The
replacement cord must be of the same type and voltage
rating as the original cord or the notebook may be
damaged.
www.gateway.com
Connecting the AC adapter
2 Connect the AC adapter to your notebook’s power connector.
3 Plug the power cord into a wall outlet.
The battery charge indicator turns on. If the battery charge indicator does
not turn on, disconnect the adapter from your notebook and repeat
Step 2.
4 When you finish using your notebook for the first time, turn the
notebook off and leave the notebook connected to AC power for at least
24 hours.
5 If the battery meters do not show a full charge after 24 hours, contact
Gateway Technical Support at www.gateway.com/support/contact.
WarningDo not attempt to disassemble the AC adapter. The
AC adapter has no user-replaceable or user-serviceable
parts inside. The AC adapter has dangerous voltages that
can cause serious injury or death. Contact Gateway about
returning defective AC adapters.
www.gateway.com
17
Chapter 2: Getting Started
Protecting from power source problems
During a power surge, the voltage level of electricity coming into your
computer can increase to far above normal levels and cause data loss or system
damage. Protect your computer and peripheral devices by connecting them
to a surge protector, which absorbs voltage surges and prevents them from
reaching your computer.
WarningHigh voltages can enter your computer through both the
power cord and the modem connection. Protect your
computer by using a surge protector. If you have a
telephone modem, use a surge protector that has a
modem jack. If you have a cable modem, use a surge
protector that has an antenna/cable TV jack. During an
electrical storm, unplug both the surge protector and the
modem.
18
www.gateway.com
Starting your notebook
A
To start the notebook:
1 Open your notebook by sliding the latch on the front of your notebook
to the right and lifting the LCD panel.
2 Press the power button located above the keyboard.
Power button
Starting your notebook
1
The power button is preset to On/Off mode. However, you can also set
it to function in Standby/Resume mode. For instructions on changing
the power button mode, see “Changing power settings” on page 114.
3 If you are starting your computer for the first time, follow the on-screen
instructions to set up your computer.
Waking up your notebook
When you have not used your notebook for several minutes, it enters a
power-saving mode called Standby. While in Standby, the power indicator
flashes.
If your notebook is in Standby mode, “wake” it up by pressing the power
button. For more information on changing power-saving settings, see
“Managing Power” on page 105.
www.gateway.com
19
Chapter 2: Getting Started
Turning off your notebook
To turn off your notebook:
■ In Windows XP, click Start, then click Turn Off Computer, then click Tur n
Off
.
- OR -
In Windows 2000 or Windows 98, click
the Shut Down Windows dialog box, select
If for some reason you cannot use the Turn Off Computer or Shut Down
option in Windows to shut down your notebook, press and hold the
power button for about five seconds, then release.
Start, then select Shut Down. In
Shut Down, then click OK.
20
www.gateway.com
Switching user accounts in Windows XP
Switching user accounts in
Windows XP
When you first turn on your notebook, you have the option to add different
user accounts. These user accounts can be customized for each person that
uses the notebook. You can add, delete, or modify existing user accounts. You
can also switch (change) user accounts without turning off your notebook.
Help and
Support
For more information about adding, deleting, and
modifying your user accounts, click Start, then select Help and Support.
To add, delete, or modify user accounts in Windows XP:
1 Click Start, select Control Panel, then double-click User Accounts. The User
Accounts window opens.
2 Follow the on-screen prompts to add, delete, or modify a user account.
www.gateway.com
21
Chapter 2: Getting Started
To switch user accounts in Windows XP:
1 Click Start, then select Log Off. The Log Off Windows dialog box opens.
2 Click Switch User to switch between your user accounts. The Windows
logon screen opens.
3 Select the user account that you want to activate. When you switch
between users, any programs that were running for the previous user
continue to run.
22
www.gateway.com
Status indicators
A
Status indicators
1
Hard drive
Optical disc
drive
Diskette drive
Pad lock
Caps lock
Scroll lock
IndicatorIconDescription
Hard driveTurns on when the hard drive is in use.
Optical disc driveTurns on when the CD/DVD drive or LS-120 drive is in use.
Diskette driveTurns on when the standard 1.44 MB diskette drive is in
use.
Caps LockTurns on when Caps Lock is activated.
Pad LockTurns on when the embedded numeric keypad is
1
Scroll LockTurns on when Scroll Lock is activated.
activated.
www.gateway.com
23
Loading...
+ 285 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.