Page 1
[File]
DescText = “DeviceNet Network”;
CreateDate = 12-6-1999;
CreateTime = 9:04:46;
ModDate = 12-6-1999;
ModTime = 9:04:46;
Revision = 2.0;
[Device]
VendCode = 469;
ProdType = 7;
ProdCode = 2112;
MajRev = 4;
MinRev = 118;
VendName = “Worcester Controls Corporation”;
ProdTypeStr = “General Purpose Discrete I/O”;
ProdName = “ACCESS/DeviceNet”;
Catalog = “07159”;
[IO_Info]
Default = 0x0001;
PollInfo = 0x0001,1,1;
Input1 = 11,0,0x0001,
“Producing IO/Data”,6,“20 04 24 65 30 03”,“Help”;
Output1 = 1,0,0x0001,
“Consuming IO/Data”,6,“20 04 24 66 30 03”,“Help”;
[Params]
Param1 =
0, $ parameter value slot
6, “20 08 24 01 30 03”, $ link size and path
0x32, $ descriptor
4, 1, $ data type, 1 byte(s)
“Input State Instance 1”, $ parameter name
“”, $ units string
“Discrete Input Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param2 =
0, $ parameter value slot
6, “20 08 24 02 30 03”, $ link size and path
0x32, $ descriptor
4, 1, $ data type, 1 byte(s)
“Input State Instance 2”, $ parameter name
“”, $ units string
“Discrete Input Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
FCD WCAIM2022-01
(Part 14120)
Worcester Controls Supplement 3
ACCESS I and M DeviceNet EDS File
Installation, Operation and Maintenance Instructions
$ Advanced DeviceNet Monitor Electronic Data Sheet
$ Complies with EDS File Syntax Checking Utility – 02.02
Page 2
2 Supplement 3: ACCESS I and M DeviceNet EDS File WCAIM2022
Flow Control
Worcester Controls
Param3 =
0, $ parameter value slot
6, “20 08 24 03 30 03”, $ link size and path
0x32, $ descriptor
4, 1, $ data type, 1 byte(s)
“Input State Instance 3”, $ parameter name
“”, $ units string
“Discrete Input Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param4 =
0, $ parameter value slot
6, “20 09 24 01 30 03”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“State Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param5 =
0, $ parameter value slot
6, “20 09 24 01 30 04”, $ link size and path
0x32, $ descriptor
4, 1, $ data type, 1 byte(s)
“Status Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param6 =
0, $ parameter value slot
6, “20 09 24 01 30 05”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Fault Action Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param7 =
0, $ parameter value slot
6, “20 09 24 01 30 06”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Fault Value Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param8 =
0, $ parameter value slot
6, “20 09 24 01 30 07”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Idle Action Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param9 =
0, $ parameter value slot
6, “20 09 24 01 30 08”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Idle Value Instance 1”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param10 =
0, $ parameter value slot
6, “20 09 24 02 30 03”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“State Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Page 3
WCAIM2022 Supplement 3: ACCESS I and M DeviceNet EDS File 3
Flow Control
Worcester Controls
Param11 =
0, $ parameter value slot
6, “20 09 24 02 30 04”, $ link size and path
0x32, $ descriptor
4, 1, $ data type, 1 byte(s)
“Status Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param12 =
0, $ parameter value slot
6, “20 09 24 02 30 05”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Fault Action Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param13 =
0, $ parameter value slot
6, “20 09 24 02 30 06”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Fault Value Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param14 =
0, $ parameter value slot
6, “20 09 24 02 30 07”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Idle Action Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param15 =
0, $ parameter value slot
6, “20 09 24 02 30 08”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Idle Value Instance 2”, $ parameter name
“”, $ units string
“Discrete Output Point\n\n”,
0,1,0,
1,1,1,0,0,0,0,0,0;
Param16 =
0, $ parameter value slot
6, “20 40 24 01 30 01”, $ link size and path
0x01, $ descriptor
9, 4, $ data type, 4 byte(s)
“Maintenance Counter Instance 1”, $ parameter name
“”, $ units string
“”,
0,4294967295,0,
1,1,1,0,0,0,0,0,0;
Param17 =
0, $ parameter value slot
6, “20 40 24 01 30 02”, $ link size and path
0x10, $ descriptor
9, 4, $ data type, 4 byte(s)
“Cumulative Counter Instance 1”, $ parameter name
“”, $ units string
“”,
0,4294967295,0,
1,1,1,0,0,0,0,0,0;
Param18 =
0, $ parameter value slot
6, “20 40 24 01 30 03”, $ link size and path
0x10, $ descriptor
8, 1, $ data type, 1 byte(s)
“Open Timer Instance 1”, $ parameter name
“Secs”, $ units string
“”,
0,255,0,
1,1,1,0,0,0,0,0,0;
Page 4
Flow Control
Worcester Controls
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function
safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial
service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore
assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation
Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of
satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve
is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning
these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.
For more information about Flowserve Corporation, visit www.flowserve.com or call USA 800 225 6989.
FLOWSERVE CORPORATION
FLOW CONTROL
1978 Foreman Drive
Cookeville, Tennessee 38501 USA
Phone: 931 432 4021
Facsimile: 931 432 3105
www.flowserve.com
© 2005 Flowserve Corporation, Irving, Texas, USA. Flowserve and Worcester Controls are registered trademarks of Flowserve Corporation. FCD WCAIM2022-01 5/05 Printed in USA.
Param19 =
0, $ parameter value slot
6, “20 40 24 01 30 04”, $ link size and path
0x10, $ descriptor
8, 1, $ data type, 1 byte(s)
“Close Timer Instance 1”, $ parameter name
“Secs”, $ units string
“”,
0,255,0,
1,1,1,0,0,0,0,0,0;
Param20 =
0, $ parameter value slot
6, “20 40 24 01 30 05”, $ link size and path
0x03, $ descriptor
4, 1, $ data type, 1 byte(s)
“Reset Counter Instance 1”, $ parameter name
“”, $ units string
“”,
0,1,0,
1,1,1,0,0,0,0,0,0;
[ParamClass]
MaxInst =20;
Descriptor =9;
CfgAssembly =0;
[EnumPar]
Param1 =“OFF”,“ON”;
Param2 =“OFF”,“ON”;
Param3 =“OFF”,“ON”;
Param4 =“OFF”,“ON”;
Param5 =“OK”,“Fault”;
Param6 =“Fault Value”,“Hold last state”;
Param7 =“OFF”,“ON”;
Param8 =“Idle Value”,“Hold last state”;
Param9 =“OFF”,“ON”;
Param10 =“OFF”,“ON”;
Param11 =“OK”,“Fault”;
Param12 =“Fault Value”,“Hold last state”;
Param13 =“OFF”,“ON”;
Param14 =“Idle Value”,“Hold last state”;
Param15 =“OFF”,“ON”;
Param20 =“unchanged”,“reset counter”;
[Groups]
Group1 = “DIP Object”,3,1,2,3;
Group2 = “DOP Object”,12,4,5,6,7,8,9,10,11,12,13,14,15;
Loading...