SM800-01
AC800 Series Fingerprint Reader
Service Manual
Table of Contents
Chapter 1
General Descriptions for AC800 Series
Fingerprint Reader
Chapter 2
Components - Details and Functions
2.0 Components Assembly
2.1 Details of Parts
2.1.1 Graphical Dot Matrix LCD
2.1.2 Connections between
Graphical Dot Matrix LCD
and Controller Board
2.1.3 Optical Fingerprint Sensor
2.1.4 Connections between Optical
Sensor and FP Matching Board
2.1.5 FP Matching Board
2.1.6 Connection of FP Matching
Board and AC800 Series
Controller Board
2.1.7 Keypad Board
2.1.8 Connection of Keypad Board
and Controller Board
2.1.9 Speaker
2.1.10 AC800 series Controller Board
2.2 Arrangements of Components in
AC800 Series Reader
Chapter 3
Troubleshooting and Repairing
3.1 Connection between Reader and PC
using LAN connection
3.1.1 Solutions
3.2 Connections between Reader and PC
using RS232/485
3.2.1 Solutions
3.3 Troubleshooting for LCD Screen
Displaying
3.3.1 Solutions
3.4 Troubleshooting for Fingerprint Sensor
3.4.1 Solutions
JULY 2005 VERSION 1
Compiled by K.L. Pang
Chapter 1: General Descriptions of
AC800 Series Fingerprint Reader
Model
Template Size
Transaction Storage
Communication
Identifi cation Time
FAR
FRR
Time Zone
Temperature
Power
Size
AC801 / AC802 / AC803 /
:
AC801WG
1k (AC801) / 1.5k (AC802) / 2.8k
:
(AC803)
30k (AC801) / 100k (AC802) /
:
120k (AC803)
RS232, RS485, TCP/IP; Wiegand
:
<=2s
:
<=0.0001%
:
<=1%
:
50 settings
:
0 - 45°C
:
12VDC @ 1A
:
150(W) x 145(H) x 38.5(D) mm
:
Overview
Chapter 4
Door Lock System
4.1 EM-Lock
4.2 Push Release Button
4.3 Override Key Switch
4.4 Emergency Break Glass
4.5 Complete connection of door lock
system
4.5.1 Simple door lock system (with
1 fi ngerprint reader)
4.5.2 Door lock system with in/out
reader
Copyright © 2005 FingerTec Worldwide. All rights reserved.
•
One to many identifi cation
•
One to one verifi cation
•
10 fi ngers enrollment per user
•
Standalone and/or networked operation
•
50 defi nable time zones
•
Integrated wall mount design
•
Power management
•
In-Out reader confi guration
•
Voice greetings
•
Wireless doorbell
•
Separate control of EM-Lock
•
26-bit Wiegand output (for WG model only)
2
Chapter 2: Components – Details and Functions
2.0 Components Assembly
AC800 Series Fingerprint Reader Service Manual
Figure 2.1 Front view of AC800
Figure 2.2 Components inside reader
Copyright © 2005 FingerTec Worldwide. All rights reserved.
3
Chapter 2: Components – Details and Functions
2.1 Details of Parts
2.1.1 LCD Display Board
LCD display board for AC800 series is connected to keypad board during factory assembly. LCD functions
to display text messages to user. It will prompt the user for necessary actions. For AC800 series reader,
the dimension of the LCD screen is 128x64 pixels (2.7cm X 4.2cm).
AC800 Series Fingerprint Reader Service Manual
LCD screen
Keypad board
Connector pins
Contrast controller
Figure 2.3 Front view of LCD
Display board
Connector Pins
•
A cable to controller board connects this part. Improper connection could cause no LCD display
when reader is turned on.
This IDE cable is used to connect keypad to the controller board.
This IDE cable is plugged into the connector pins on the keypad
board and controller board.
Please use the diagram below during plugging in of the IDE cable.
Keypad board Controller board
Figure 2.4 Back view of LCD
Displaying board
Figure 2.4 IDE cable Figure 2.5 Connections between controller
board & keypad board
Copyright © 2005 FingerTec Worldwide. All rights reserved.
Loading...