P/N 041224
TONE-MASTER® OWNERS’ MANUAL
INTRODUCTION
The Fender Amp Custom Shop is dedicated to creating high quality amplification to serve top artists and discriminating players. The Tone-Master is a unique amplifier with many possibilities. On the surface it is a 100 watt, 2 channel switching “Head” amplifier. Upon further inspection one will notice many features which set it apart from anything offered before.
The Tone-Master is a hand-made, point-to-point wired, tube instrument amplifier. There are no solidstate (transistor) devices in the signal path of any kind. This amplifier was created from the efforts of a handful of top craftsmen, players and designers who saw a need and envisioned a new amplifier. Like the other Fender custom amps, the Tone-Master is painstakingly built, one at a time, by a select group of craftsmen at the Fender electronics factory in Lake Oswego, Oregon.
The Tone-Master was created for the discriminating player who requires a high powered, high volume amplifier capable of clean tones, overdriven vintage amp tones as well as heavily overdriven distortion. It has 2 independent channels, switchable via the front panel A/B switch or the footswitch (provided).
It is suggested that you read this manual thoroughly to understand all the features and functions of this amplifier. This amplifier will provide years of trouble-free service and playing enjoyment.
TONE-MASTER CONTROL FUNCTIONS
A.INPUTS -The guitar input for the Tone-Master.
B.FAT - Adds a 3dB boost in gain to the A CHANNEL, mostly to the low and midrange frequencies.
C.VOLUME A - Controls the loudness of CHANNEL A.
D.TREBLE - Adjusts the overall brightness in the A CHANNEL.
E.BASS - Adjusts the level of low frequencies in the A CHANNEL.
F.MID - Adjusts the level of midrange frequencies in the A CHANNEL.
G.A/B - Allows front panel selection of CHANNEL A or CHANNEL B. SPECIAL NOTE: This switch
is deactivated by plugging in the footswitch.
H. FAT - Adds a 3dB boost in gain on the B CHANNEL. (Adds “EDGE”)
Loading...