Datasheet FODM3011 Datasheet (Fairchild)

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

April 2009

FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Features

Compact 4-pin surface mount package (2.4 mm

■

maximum standoff height)

■

Peak blocking voltage 250V (FODM301X) 400V (FODM302X) 600V (FODM305X)

■

Available in tape and reel quantities of 2500. Add “NF098” for new construction version with 260°C

■

max. reﬂow temperature rating

■

UL, C-UL and VDE certiﬁcations pending

Applications

Industrial controls

■

Tr afﬁc lights Vending machines

■

Package Dimensions

Applications

Solid state relay

■

Lamp ballasts

■

Solenoid/valve controls Static AC power switch

■

Incandescent lamp dimmers Motor control

■

(Continued)

Description

The FODM301X, FODM302X, and FODM305X series consists of a GaAs infrared emitting diode driving a silicon bilateral switch housed in a compact 4-pin mini-ﬂat package. The lead pitch is 2.54mm. They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115V/240V operations.

4.40±0.20

2.54±0.25

3.60±0.30

2.00±0.20

0.10±0.10

0.40±0.10

Note:

All dimensions are in millimeters.

5.30±0.30

+0.2

7.00

–0.7

0.20±0.05

ANODE

CATHODE

1

2

MAIN

4

TERMINAL

MAIN

3

TERMINAL

(T

Absolute Maximum Ratings

= 25°C unless otherwise speciﬁed)

A

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Symbol Parameter Value Units

TOTAL PACKAGE

T

STG

T

OPR

EMITTER

I

F (avg)

I

F (pk)

V

R

P

D

DETECTOR

I

T(RMS)

V

DRM

P

D

Storage Temperature -55 to +150 °C Operating Temperature -40 to +100 °C

Continuous Forward Current 60 mA Peak Forward Current (1µs pulse, 300pps.) 1 A Reverse Input Voltage 3 V Power Dissipation (No derating required over operating temp. range) 100 mW

On-State RMS Current 70 mA (RMS) Off-State Output Terminal Voltage FODM3011/FODM3012 250 V

FODM3022/FODM3023 400 FODM3052/FODM3053 600

Power Dissipation (No derating required over operating temp. range) 300 mW

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

(T

Electrical Characteristics

= 25°C)

A

Individual Component Characteristics

Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit

EMITTER

V

Input Forward Voltage I

F

Reverse Leakage Current V

I

R

DETECTOR

I

DRM

Peak Blocking Current Either Direction

dV/dt Critical Rate of Rise of

Off-State Voltage

= 10mA All 1.20 1.5 V

F

= 3V, T

R

Rated V

I

= 0 (Figure 8)

F

= 25°C All 0.01 100 µA

A

(1)

, I

DRM

F

= 0

(2)

All 2 100 nA

FODM3011,

10 V/µs FODM3012, FODM3022,

FODM3023

FODM3052,

1,000

FODM3053

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Transfer Characteristics

Symbol DC Characteristics Test Conditions Device Min. Typ.* Max. Unit

I

V

I

LED Trigger Current Main Terminal

FT

Holding Current, Either

H

Direction Peak On-State Voltage Either

TM

Direction

Voltage = 3V

(3)

FODM3011, FODM3022,

10 mA

FODM3052

FODM3012,

5

FODM3023,

FODM3053

All 300 µA

I

= 100mA peak All 1.7 3 V

TM

Isolation Characteristics

Symbol Characteristic Test Conditions Device Min. Typ.* Max. Unit

V

ISO

*All typicals at T

Notes:

1. Test voltage must be applied within dv/dt rating.

2. This is static dv/dt. See Figure 1 for test circuit Commutating dv/dt is function of the load-driving thyristor(s) only.

3. All devices are guaranteed to trigger at an I I

lies between max I

F

and FODM3053) and absolute max I

Steady State Isolation Voltage

= 25°C

A

(10mA for FODM3011, FODM3022, and FODM3052, 5mA for FODM3012, FODM3023,

FT

1 Minute, R.H. = 40% to 60%

value less than or equal to max I

F

(60mA).

F

All 3750 VRMS

. Therefore, recommended operating

FT

Typical Performance Curves

Fig. 1 LED Forward Voltage vs. Forward Current Fig. 2 Leakage Current vs. Ambient Temperature

1.8

1.7

1000

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

VDRM = 600V

1.6

1.5

1.4

1.3

1.2

- FORWARD VOLTAGE (V) F

V

TA = 25°C

1.1

TA = 100°C

1.0

0.9 110100

IF - FORWARD CURRENT (mA)

TA = -40°C

Fig. 3 Holding Current vs. Ambient Temperature Fig. 4 Trigger Current vs. Ambient Temperature

10

NORMALIZED TO TA = 25°C

1.0

100

10

- LEAKAGE CURRENT (nA)

1

DRM

I

0.1

-40 -20 0 20 406080100

TA - AMBIENT TEMPERATURE (°C)

1.6

1.4

1.2

1.0

V

= 3V

TM

NORMALIZED TO T

= 25°C

A

0.8

- HOLDING CURRENT (NORMALIZED) H

I

0.1

-40 -20 100

020406080

TA - AMBIENT TEMPERATURE (°C)

- TRIGGER CURRENT (NORMALIZED)

0.6

FT

I

0.8

-40 -20 0 20 40 60 80

TA - AMBIENT TEMPERATURE (°C)

100

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Typical Performance Curves

(Continued)

Fig. 5 LED Current Required to Trigger vs. LED Pulse Width Fig. 6 Off-State Output Terminal Voltage vs. Ambient Temperature

12

T= 25°C

T

A

10

8

6

4

- LED TRIGGER CURRENT (NORMALIZED)

2

FT

I

0

110100

PWIN - LED TRIGGER PULSE WIDTH (°C)

IN

>> 100µsNORMALIZED TO PW

1.4

NORMALIZED TO T = 25°C

1.3

1.2

1.1

1.0

(NORMALIZED)

0.9

0.8

- OFF-STATE OUTPUT TERMINAL VOLTAGE

0.7

DRM

V

0.6

-40 -20

A

020406080100

TA - AMBIENT TEMPERATURE (°C)

Fig. 7 On-State Characteristics

800

TA = 25°C

600

400

200

0

-200

- ON-STATE CURRENT (mA)

TM

I

-400

-600

-800

-4 -3 -2 -1 0 1 2 3 4

VTM - ON-STATE VOLTAGE (V)

Typical Application Information

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

600V (FODM3052)

(FODM3053)

400V (FODM3022)

(FODM3023)

250V (FODM3011)

(FODM3012)

Vdc

PULSE INPUT

APPLIED VOLTAGE

WAVEFORM

0 VOLTS

MERCURY

WETTED

RELAY

378 V 252 V 158 V

τ

RC

R

TEST

C

(FODM3052, FODM3053) (FOMD3022, FODM3023) (FODM3011, FODM3012)

R = 10 kΩ

TEST

D.U. T.D.U. T.

1. The mercury wetted relay provides a high speed

2. 100x scope probes are used, to allow high speeds and

3. The worst-case condition for static dv/dt is established by

X100 SCOPE PROBE

V

max

dv/dt =

NOTE: This optoisolator should not be used to drive a load directly. It is intended to be a trigger device only.

Figure 8. Static dv/dt Test Circuit

R

L

R

in

V

CC

1

2

FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053

180

4

3

120 V 60 Hz

repeated pulse to the D.U.T.

voltages.

triggering the D.U.T. with a normal LED input current, then removing the current. The variable R dv/dt to be gradually increased until the D.U.T. continues

TEST

allows the

to trigger in response to the applied voltage pulse, even after the LED current has been removed. The dv/dt is then decreased until the D.U.T. stops triggering. τRC is measured at this point and recorded.

=

600 V (FODM3052, FODM3053) = 400 V (FODM3022, FODM3023) = 250 V (FODM3011, FODM3012)

0.63 V

τ

378

max

=

(FODM3053)

τ

RC

(FODM3052)

252

=

(FODM3023)

τ

RC

(FODM3022)

158

=

(FODM3011)

τ

RC

(FODM3012)

Figure 9. Resistive Load

Z

L

R

in

V

CC

1

2

FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053

180

4

0.1 µF

3

2.4k

120 V

C1

60 Hz

Figure 10. Inductive Load with Sensitive Gate Triac (IGT ≤ 15 mA)

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Typical Application Information

R

in

V

CC

In this circuit the “hot” side of the line is switched and the load connected to the cold or ground side.

The 39Ω resistor and 0.01µF capacitor are for snubbing of the triac, and the 470Ω resistor and 0.05µF capacitor are for snubbing the coupler. These components may or may not be necessary depending upon the particular and load used.

1

2

FODM3022 FODM3023 FODM3052 FODM3053

(Continued)

360

4

3

0.05 µF

470

39

0.01 µF

LOAD

240

VAC

Figure 11. Typical Application Circuit

HOT

GROUND

Ordering Information

Option Description

V_NF098 VDE Approved

R2_NF098 Tape and Reel (2500 units)

R2V_NF098 Tape and Reel (2500 units) and VDE Approved

Note:

To specify the new construction version with 260°C max reflow peak temperature rating: Add "NF098" to the end of the part number. The non NF098 version is rated for 230°C peak reflow temperature.

Marking Information

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

1

3011

XVR

YY

3

4

5

2

6

Deﬁnitions

1Fairchild logo 2Device number 3 VDE mark (Note: Only appears on parts ordered with VDE

option – See order entry table) 4 One digit year code 5Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code

Tape Speciﬁcations

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

K

t

0

d

Tape Width Tape Sprocket Hole Sprocket Hole Dia. Sprocket Hole Locatio

Pocket Location

Pocket Pitch Pocket Dim

Poc

Cover Tape Width

o

ver Ta

C

Max. C

Devices Per Reel

W

Thickness

e

ket Hole

pe Thickness

o

mp

1

Description

Pitch

n

nsion

Dia.

n

ent Rotatio

n

or Tilt

P

0

Symbol

W t P

0

D

0

E F P

2

P A

0

B

0

K

0

D

1

W

1

d

P

2

D

0

E

A

0

P

B

0

2.54 Pitch

Dimensions

±

0.4

12.00

0.35

±

0.02

4.00

±

0.20

1.55

±

0.20

1.75

±

0.20

5.50

±

0.20

2.00

±

0.20

00

20

8.

±

0.

4.75

±

0.20

7.30

±

0.20

2.30

±

0.20

1.55

±

0.20

9.20

±

0.02

0.065

a

x

20°

m

0

250

F

D

1

W

Re

330 m

(13")

m

e

ter

m

Dia

el

Footprint Drawing for PCB Layout

6.50

0.80

2.54

1.00

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Note:

All dimensions are in mm.

Reﬂow Proﬁle

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

Max. Ramp-up Rate = 3°C/S

Max. Ramp-down Rate = 6°C/S

Ts ma x

Preheat Area

Ts mi n

t

L

t

s

260 240 220 200 180 160 140 120

T

P

T

L

100

80 60

Temperature (°C)

40 20

0

120

240 360

Time 25°C to Peak

Time (seconds)

Proﬁle Freature Pb-Free Assembly Proﬁle

Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (t Ramp-up Rate (t Liquidous Temperature (T Time (t Peak Body Package Temperature 260°C +0°C / –5°C Time (t Ramp-down Rate (T Time 25°C to Peak Temperature 8 minutes max.

) from (Tsmin to Tsmax) 60–120 seconds

S

to t

) 3°C/second max.

L

P

) 217°C

L

) Maintained Above (T

L

) within 5°C of 260°C 30 seconds

P

to T

P

) 60–150 seconds

L

) 6°C/second max.

L

t

P

TRADEMARKS

The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andis not intended to be an exhaustive list of all such trademarks.

Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™

CROSSVOLT™

CTL™ Current Transfer Logic™ EcoSPARK EfficentMax™ EZSWITCH™*

®

™*

®

Fairchild Fairchild Semiconductor FACT Quiet Series™

®

FACT

®

FAST

®

F-PFS™

®

FRFET Global Power Resource Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC OPTOPLANAR

®

FastvCore™ FETBench™ FlashWriter FPS™

®

*

PDP SPM™ Power-SPM™

PowerTrench

SM

PowerXS™ Programmable Active Droop™ QFET QS™ Quiet Series™ RapidConfigure™

Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM STEALTH™ SuperFET™

®

SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SupreMOS™ SyncFET™ Sync-Lock™

®

ThePower Franchise

TinyBoost™ TinyBuck™

®

TinyLogic

®

TINYOPTO™

™

TinyPower™ TinyPWM™ TinyWire™ TriFault Detect™

®

TRUECURRENT™* µSerDes™

®

UHC Ultra FRFET™ UniFET™ VCX™ VisualMax™

®

*

XS™

*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICHCOVERSTHESE PRODUCTS.

FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.

2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

ANTI-COUNTERFEITING POLICY

Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support.

Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failedapplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicalandproduct information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative / In Design

Preliminary

First Production

No Identification Needed Full Production

Obsolete Not In Production

Datasheet contains the design specifications for product development. Specifications may change in any manner without notice.

Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design.

Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design.

Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only.

Rev. I40

Datasheet FODM3011 Datasheet (Fairchild)

Specifications and Main Features

Frequently Asked Questions

User Manual