User's Guide
Tone Generator and Amplifier Probe
Model 40180
Introduction
Congratulations on your purchase of Extech’s Model 40180. This tone generator and amplifier probe set is used to quickly trace and identify cables or wires within a group and also check the operation of phone lines. With proper use and care, this meter will provide many years of reliable service.
Specifications
Power |
9V battery (tone generator and probe (1 each)) |
Tone output |
1kHz, 6V square wave (approximately) |
Dimensions |
Probe:9x2.25x1(228x57x25.4mm),Generator:2.5x2.5x1.5”(63.5x63.5x38.1mm) |
Weight |
0.6lb (272gm) |
Meter Description
1.Power switch
2.Modular connectors
3.Test leads
4.Battery compartment (rear)
5.Probe tip
6.Volume/Sensitivity control
7.Power button
8.Battery compartment (rear)
9.Headphone jack
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Back to the Extech 40180 Product Info Page
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
Loading...