EXFO FOT-930 MaxTester, FOT-932 MaxTester, FOT-930X MaxTester, FOT-933 MaxTester User Manual

FasTesTTM: three-wavelength measurement of optical loss,
OR L and fiber length in 10 seconds

All-in-one portable test solution: up to eight instruments combined
in a single, eye-catching handheld package

FTTx ready: allows for the testing of passive optical networks (PO Ns)
at 1310 nm, 1490 nm and 155 0 nm, the three wavelengths
recommended by the ITU-T (G.9 83.3) for P ONs

Cost of ownership: lowest in the industry, thanks to three-year
warranty and recommended calibration interval, error-free testing
and minimized training time

Telecommunications Test and Measurement

www.megahz.com

MULTIFUNCTION LOSS TESTER

FOT-930 MaxTester

930

NETWORK TESTING

Mega Hertz

EXFO’s Next-Generation MaxTester: Much More
Features, Much Bigger Performance

The new FOT-930 MaxTester Multifunction Loss Tester is designed to help network service providers address CAPEX and OPEX issues, enable installers
to easily adapt to all network types, and provide CA TV operators with a single-unit solution to their bac kreflection, fiber-length, high-power and bidirectional
loss measurement needs. Combined with its video fiber inspection probe, this unit also enables the easy detection of dirty or damaged connectors,
providing a clear view of connectors and fiber ends on the FOT-930’s high-resolution display.

FOT-930 MaxTester

With countless configurations available, the
FOT-930 MaxTester is the handheld unit of
choice for today’s network service providers,
fiber-optic network installers/contractors and
CATV operators.

All-in-one unit: combines up to eight instruments

Loss meter
Power meter
Optical return loss (ORL) meter
Visual fault locator
Multimode and singlemode light sources
Digital talk set
Fiber length tester
Video fiber inspection probe

FasTesT function*: one-touch,

automated measurements in 10 seconds

Bidirectional loss and ORL testing at up to
three singlemode wavelengths

Bidirectional loss testing at two multimode
wavelengths

Fiber length measurement

Flexible solution: five-wavelength multimode
and singlemode configurations meeting the
requirements of installers/contractors for all
test situations

Up to three singlemode wavelengths—
1310, 1550 and a choice between 1490
and 1625 nm—on one port

Two multimode wavelengths—850 and
1300 nm—on a second port

Future-proof: next-generation features meeting
the latest industry requirements

User-configurable pass/fail thresholds that can
be adjusted to different industry standards

FTTx ready, allowing for the testing of
passive optical networks (PONs) at 1310,
1490 and 1550 nm, the three ITU-T
G.983.3 recommended wavelengths
for PONs

Cost of ownership: lowest on the market

Three-year warranty and recommended
calibration interval

Error-free testing achieved through visual
loss and ORL pass/fail analysis

Minimized training time, thanks to a single
user interface for the eight instruments
included in this all-in-one unit

Easy to use and ergonomic: built for today’s
fiber-optic test requirements

Handy, eye-catching and rugged handheld
package

High-resolution color display
Complete data management and report

generation
Nine hours power autonomy provided by

field-swappable rechargeable batteries

*Protected by US patent(s) 5,305,078 and/or 5,455,672.

FTTx-Ready: Optimized for Testing
Passive Optical Networks (PONs)

FOT-930 MaxTester

The FOT-930 allows for automated, bidirectional loss and ORL testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three
wavelengths recommended by the ITU-T (G.983.3) for PONs.

FTTx-Mode Operation

This mode lets you configure your FOT-930 MaxTester to suit your FTTx
wavelengths and test-unit locations, as well as choose your preferred data
presentation options for on-screen display or report generation. Key benefits
include:

Display of test data according to FTTx terminology
Similar test-data presentation, regardless of the location of master and

remote units

Integrated Data Storage Management

This feature enables the FasTesT initiator to save results on a remote unit—even when multiple remote units are used. Key benefits include:

The possibility to store test data in a single unit
Easier data post-processing and transfer from the FTB-3930 module (see Figure below)

Point-to-Multipoint Testing with Multiple Referencing

Implemented in the FTB-3930 MultiTest Module, multiple referencing lets you coordinate the FTB-3930 with up to 10 remote FOT-930 MaxTester units.
Key benefits include:

First-class efficiency, as several technicians can simultaneously install and test distribution fibers