Erbe VIO 200S Quick user manual

VIO® 200 S

Quickstart Guide

Set up for Snare/Hot Biopsy Use					Set up for Bipolar Use
1.	Turn ON the Unit.				1.	Turn ON the Unit.
2.	Scroll through the programs and select highlighted				2.	Scroll through the programs and select highlighted
	Snare / Hot Biopsy Program.					Bipolar Probes Program.
			Up Scroll Button				Up Scroll Button

Down Scroll Button		Down Scroll Button

3.Press the FOCUS Active Display button beside the Monopolar receptacle.

3.Press the FOCUS Active Display button beside the Bipolar receptacle.

4. Check the Program Screen to confirm the settings		4. Check the Program Screen to confirm the settings
	(Default program shown).		(Default program shown).

5.Plug in the Active Cord and attach the Snare or Hot Biopsy Forceps.

5.Plug in the Adaptor¹ and attach the Bipolar Probe or use a banana style plug probe².

6.Plug the Grounding Pad into the NEUTRAL receptacle and place the Pad on the patient.

7.Place Footswitch at the physician’s feet.

Verbally confirm settings with physician.

8.READY to begin procedure.

Adjust settings per physician direction, increasing the Effect then max.Watts for more power

1

2

6.NO Grounding Pad needed.

7.Place Footswitch at the physician’s feet.

Verbally confirm settings with physician.

8.READY to begin procedure.

Adjust settings per physician direction, increasing the Effect then max.Watts for more power.

ERBE Clinical Support

1.800.778.3723 8:30am – 5:00pm LIT/5213/00 08/09

After hours and weekends call 1.800.778.3723 and follow prompts.