Epson Stylus Pro 4880 Installation Guide

Installation Guide

Read This First

Getting Started

Before setting up the ExpressDigital Darkroom CoreTM Edition for Epson
software, see the Epson
your Epson Stylus

®

Start Here poster or Printer Guide to set up and install

®

Pro Portrait Edition printer using a USB connection.

To install the software, insert the CD into your CD or DVD drive and follow the
on-screen instructions.

Configuring Your Printer

Once the Darkroom Core Edition for Epson software is installed, make sure your
Epson Stylus Pro Portrait Edition printer is turned on and connected to your
computer. Then follow the steps below to enable and configure the printer.

1. Double-click the

2. Click the

3. Select

printer

Setup

Printer Options

.

4. On the Main tab, make sure that the
checked, then select the Paper Type, Paper Source, and Paper Size settings that
match the paper you have loaded in the printer.

Darkroom Core Edition for Epson

icon on your desktop.

tab at the bottom of the software window.

, select your printer in the list, then click

Enable this printer

configure

checkbox is

5. Click the

Automatic - Choose output profile based on paper type

Advanced

6. When you have finished selecting printer settings, click

tab and make sure that Profile Settings is set to

.

OK

to return to the

software window.

If you would like to print black and white photos, see the next section to
reconfigure your Printer Options in the Darkroom Core Edition for Epson
software. When you’re finished configuring your printer, see “Finishing the
Installation” on the next page.

1

Getting Started