Product Bulletin
89000 Valve
D103346X012
Baumann™ 89000 Sanitary Control Valve
Baumann 89000 sanitary control valves provide
control solutions for various sanitary process systems.
These valves meet FDA and USP CLVI standards. All
metal parts in contact with the media are made of
S31603 stainless steel and each valve comes standard
with a stainless steel actuator to resist corrosion from
caustic wash down.
The 89000 control valve is designed for use in a wide
range of applications in many industries, including
biotechnology, pharmaceutical, food & beverage,
cosmetics, and others where cleanliness and sterility
are required. The valves have a modular design
allowing for quick assembly and easy maintenance and
calibration.
52.1:89SV
March 2014
Features
Sizes ranging from NPS 1/2 to 6
Elastomers meet FDA and USP CLVI standards
Internal surface finish of 20 Ra (0.5 m) available
Stainless steel diaphragm actuators with an
electropolish finish come standard
Actuators are optimally matched to each valve size
to suit many processes
A robust stainless steel yoke construction connects
the valve with its actuator and allows the Fisherr
FIELDVUE™digital valve controller to be attached
Theentirevalveassemblycanbeeasily
disassembled for inspection and maintenance
Specifications
See table 2 for technical specifications and table 3 for
actuator specifications.
W9850
Baumann 89000 NPS 1/2 Sanitary Control Valve Shown
with FIELDVUE DVC2000 Digital Valve Controller
W9851-2
Baumann 89000 NPS 3 Sanitary Control Valve Shown
with FIELDVUE DVC6200 Digital Valve Controller
www.Fisher.com
Product Bulletin
52.1:89SV
March 2014
89000 Valve
D103346X012
Figure 1. Baumann 89000A Angle Valve Assembly
E1337
Figure 2. Baumann 89000I Inline Valve Assembly
E1338
Table 1. Materials of Construction
Key
Number
1a Angle Valve Body
1b Upper Inline Valve Body
1c LowerInline Valve Body
2 Diaphragm Actuator
3 Actuator Clamp
4 Yoke
5 Upper Body Clamp
6 Middle Body Clamp
7 Lower Body Clamp
8 Stem Locknut
9 O-Ring EPDM
10 Bonnet S31603 Stainless Steel
11 Bearing PTFE/Bronze
12 Valve Plug with Seat
13
14 O-Ring
15 O-Ring
16 Inline Valve Seat S31603 Stainless Steel
Angle Valve Seat/Lower Pipe Connection
Description Material
S31603 Stainless Steel
S30400 Stainless Steel
S31603 Stainless Steel
(1pc)
EPDM
2
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
Figure 3. Baumann 89000A Angle Valve Body
1
A
1
E1339
Installed with flow from Port B to Port A. Flow from Port A to Port B isnot
1
recommended
B
Figure 4. Baumann 89000I Inline Valve Body
TELL TALE
LEAK PORT
1
A
1
B
E1340
Installed with flow from Port B to Port A. Flow from Port A to Port B is not
1
recommended
Table 2. Technical Specifications
Nominal Size NPS 1/2 through 6
Valve Body Material S31603 Stainless Steel
Internal Valve Body Finish </=20Ra Microinch / 0.50Ra Micron
Connections Tri-Clamp Standard (Weld Ends, ISO Clamps and others available)
Rangeability 50:1
Bonnet Clamped
Characteristics Modified Equal Percentage
Seat Leakage ANSI / FCI 70-2, CLIV (Metal Seat)
Maximum Operating Pressure 17 bar (250 Psi)
Maximum Operating Temperature,
Fluids, and Gases (Non-Steam)
Maximum Operating Temperature,
Steam
135_C (275_F)
160_C (320_F)
3
Product Bulletin
52.1:89SV
March 2014
Table 3. Actuator Specifications
Type 20 50 50H 112
Travel, mm (Inches) 20 (0.8) 30 (1.2) 60 (2.4)
Air Failure Open or Closed
Ambient Temperature
Range
Maximum Air Pressure 80 Psi
Spring Cases S30400 Stainless Steel
Yoke S30400 Stainless Steel
-20 to 80_C (0 to 175_F)
Table 4. Allowable Pressure Drops
ACTUATOR
SIZE
Bench Range
AIR-TO-OPEN
VALVE SIZE
DN NPS bar (psi)
15 1/2
20 3/4
25 1.0 10 9.0 24 (0.94) 16 (230)
40 1-1/2 21 18 32 (1.26) 16 (230)
50 2
-- 3 79 68 62 (2.44) 11 (155) 16 (230)
80 -- 99 85 73 (2.87) 7.7(110) 16 (230)
100 4 209 180 90 (3.54) 5 (70) 16 (230)
150 6(A) 442 380 135(5.31) 8 (115)
AIR-TO-CLOSE
1. Consult your Emerson Process Management sales office for NPS6 availability.
Cv Kv
0.29 0.25 7 (0.28) 16 (230)
1.2 1.0 7 (0.28) 16 (230)
1.9 1.6 8.5 (0.33) 16 (230)
4.7 4.0 16 (0.63) 16 (230)
21 18 32 (1.26) 16 (230)
33 28 48 (1.89) 16 (230)
ACTUATOR SIZE 20 50 50H 112
Bench Range, bar 0.8 - 4.0 1.5 - 3.0 1.5 - 3.0 1.4 - 3.0
Bench Range, psi 12 - 58 22 - 44 22 - 44 45 - 75
Valve Stroke, mm (Inches) 20 (0.8) 30(1.2) 60 (2.4)
VALVE SIZE Allowable Shutoff Pressure
DN NPS bar (psi)
25 - 100 1-4 160 (230)
150 6
(bar)
Bench Range
(psi)
Valve Stroke,
mm (Inches)
Port
Diameter mm
(Inches)
(1)
20 50 50H 112
0.8 - 4.0 1.5 - 3.0 1.5 - 3.0 1.4 - 3.0
12 - 58 22 - 44 22 - 44 45 - 75
20 (0.8) 30(1.2) 60 (2.4)
ALLOWABLE SHUTOFF PRESSURES
10 (145)
89000 Valve
D103346X012
4
Product Bulletin
89000 Valve
D103346X012
Figure 5. Dimensions for Baumann 89000A Angle Valve with FIELDVUE DVC6200 Digital Valve Controller
C
B
52.1:89SV
March 2014
A
GE59923-A
ED
Table 5. Baumann 89000A Angle Valve Dimensions
VALVE SIZE
DN NPS Capacity mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch
15 1/2 0.29 62.7 2.5 50 1.97 344 13.5 331 13 165 6.5 261 10.3 65.40 2.57 52.70 2.07
15 1/2 1.2 62.7 2.5 50 1.97 34 4 13.5 331 13 165 6.5 261 10.3 63.90 2.52 51.20 2.01
20 3/4 1.9 62.7 2.5 50 1.97 34 4 13.5 331 13 165 6.5 261 10.3 66.35 2.61 53.65 2.11
20 3/4 4.7 62.7 2.5 50 1.97 34 4 13.5 331 13 165 6.5 261 10.3 62.70 2.47 50.00 1.97
25 1 10 62.7 2.5 50 1.97 344 13.5 331 13 270 10.6 261 10.3 61.75 2.43 49.05 1.93
40 1-1/2 21 102.7 4 90 3.54 445 17.5 432 17 270 10.6 261 10.3 104.10 4.1 91.40 3.60
50 2 33 112.7 4.4 100 3.94 459 18.1 446 17.6 270 10.6 261 10.3 112.70 4.44 100.00 3.94
--- 3 79 142.7 5.6 130 5.12 531 20.9 519 20.4 270 10.6 261 10.3 148.15 5.83 135.45 5.33
80 --- 99 142.7 5.6 130 5.12 531 20.9 519 20.4 270 10.6 261 10.3 142.70 5.62 130.00 5.12
100 4 209 155.9 6.1 140 5.50 552 21.7 536 21.1 270 10.6 261 10.3 155.90 6.14 150.00 5.91
150 6 442 Contact your Emerson Process Management sales office for NPS 6 availability.
Tri-Clamp A Weld End A Tri-Clamp B Weld End B C D Tr-Clamp E Weld End E
DIMENSIONS
5
Product Bulletin
52.1:89SV
March 2014
Figure 6. Dimensions for Baumann 89000I Inline Valve with FIELDVUE DVC2000 Digital Valve Controller
D
F
E
89000 Valve
D103346X012
C
B
E1342
A
A
Table 6. Baumann 89000I Inline Valve Dimensions
VALVE SIZE
DN NPS mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch
15 1/2 62.7 2.5 50 1.97 34.5 1.36 50 1.97 165 6.5 366 14.4 127 5
20 3/4 62.7 2.5 50 1.97 34.5 1.36 50 1.97 165 6.5 366 14.4 127 5
25 1 102.7 4 90 3.54 48 1.89 74 2.91 165 6.5 464 18.3 153 6
40 1-1/2 102.7 4 90 3.54 48 1.89 74 2.91 270 10.6 464 18.3 153 6
50 2 112.7 4.4 100 3.94 56 2.20 85 3.35 270 10.6 488 19.2 153 6
80 3 147.7 5.6 130 5.12 78 3.07 116 4.57 270 10.6 581 22.9 153 6
100 4 1553.9 6.1 140 5.50 86 3.39 136 5.35 270 10.6 617 24.3 153 6
150 6 Contact your Emerson Process Management sales office for NPS 6 availability.
Tri-Clamp A Weld End A B C D E F
DIMENSIONS
6
Product Bulletin
89000 Valve
D103346X012
Table 7. Model Numbering System
89 588
ACTUATOR TYPE VALVE BODY PLUG SERIES CHARACTERISTIC SEAT LEAKAGE VALVE BODY STYLE
20 588
50 I Inline
50H
112
Equal % / Metal Seat
(S31603)
IV A Angle
March 2014
52.1:89SV
7
Product Bulletin
52.1:89SV
March 2014
89000 Valve
D103346X012
Neither Emerson, Emerson Process Man agement, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Baumann, Fisher, and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.
Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property
of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E 2009, 2014 Fisher Controls International LLC. All rights reserved.
8
Loading...