Identification: |
D02 |
|
Technical |
|
|
Bulletin no: |
CGX2007-04 (page 1 of 1), 1st ed. |
|
Date: |
|
12 March 2007 |
Issuer: |
|
R. Sartor (DWS Customer Support) |
Factory: |
|
DW Vallenoncello - Italy |
|
Drops Slide & Panels in UC |
|
Subject |
||
Model |
Undercounter double skin range (LS6E / WT30E). |
|
Problem |
Sometime leakage from door sides. |
|
Reason |
The plastic drops slide (introduced some years ago to collect condensed |
|
|
steam) it’s stuck with silicon and it may be “waved”. |
|
Action in |
Since serial number 71100001 we have introduced a stainless steel drops |
|
Factory |
slide (always flat and fixed with spot welding to the side panel) instead of the |
|
|
plastic drops slide 049362: |
OLD |
|
NEW |
Action in
Field
This solution is already in use since the production start in Utensils Washer (LU7 / WTU40) and Undercounter double skin with water softener built-in (LS6EADPWS / WT38WS).
At the same time we have standardized control panels, top panels, side panels and rear panels in the whole UC double skin range, all brands: now all LS6E / WT30E machines have same panels of LS6EADPWS (i.e. LS6E with water softener built-in).
Therefore all UC double skin machines are 612 mm deep (machines without water softener built-in change from 600 mm to 612 mm) and have the “flat” top panel.
New panels are not interchangeable towards previous one unless to replace all of them (see spare parts catalogue for more details about codes).
The stainless steel drops slide has not spare part code because it’s welded.
ELECTROLUX PROFESSIONAL SPA |
|
|
|
MAILING ADDRESS |
TELEPHONE |
WEBSITE |
VAT NO. |
VIA SEGALUZZA, 30 |
++39 0434 380650 |
www.electrolux.com |
00072220932 |
33170 PORDENONE - ITALY |
|
|
|
OFFICE ADDRESS |
TELEFAX |
E-MAIL ADDRESS |
|
VIA SEGALUZZA, 30 |
++39 0434 380636 |
riccardo.sartor@electrolux.it |
|
33170 PORDENONE - ITALY |
++39 0434 385646 |
|
|