Page 1
This product can be used with the
following operating systems:
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Macintosh OS v10.1Macintosh OS v10.1
Macintosh OS v10.1
Macintosh OS v10.1Macintosh OS v10.1
DUB-C2DUB-C2
DUB-C2
DUB-C2DUB-C2
2-Port USB 2.0
Cardbus Adapter
Before You Begin
You must have at least the following:
• Windows XP/Me/2000/98SE or Macintosh OS v10.1
• Pentium Class CPU or Higher
• One Available 32-bit Cardbus Slot
• CD-ROM Drive
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
• DUB-C2 Hi-Speed USB 2.0 Notebook
Cardbus Adapter
• CD-ROM (containing Drivers,
Installation Guide and Warranty)
Windows Users
Run the Driver CD before you install the DUB-C2.
The Driver CD contains an installation program that
significantly simplifies your installation process.
Page 2
Insert the D-Link CD-ROM
Into Your Computer
Mac users please proceed to
the last section of this guide.
Turn on your computer and
insert the D-Link DUB-C2
Driver CD in the CD-ROM drive.
Click Install Driver
If the Autorun screen does not automatically start, click on Start > Run, enter
“D:\Autorun.exe” and click OK. “D” represents the letter of your CD-ROM drive.
Replace it if your CD-ROM drive is a different letter.
Only Windows 98 users
will see this screen.
Click Next
Only Windows XP users
will see this screen.
Click Continue Anyway
Page 3
Select No and
Shut Down Your
Computer
Installing The DUB-C2 USB 2.0 Cardbus
Adapter Into Your Computer
Make sure your computer is completely
turned OFF before installing the DUB-C2.
Locate an available
cardbus slot and insert
the DUB-C2 into the
cardbus slot.
Turn On your computer.
Page 4
Completing The Driver Installation
Windows XP Users
Follow these steps to complete installation under Windows XP for
each device that Windows prompts you to install.
Click Next
Click Continue Anyway
Click Finish
Page 5
Windows XP Users
Click Next
Click Continue Anyway
Click Finish
Windows 2000 & Me Users
The DUB-C2 driver installation will proceed automatically for Windows
2000 & Me users while Windows is starting.
Page 6
Windows 98SE Users
Follow these steps to complete installation under Windows 98. You
will have to repeat these steps twice.
Click Next
Click Next
Select only
CD-ROM
drive
Click Next
Page 7
Windows 98SE Users
Click Next
Click Next
Windows 98 may prompt
you for the Windows 98
Setup disk. If prompted,
insert the Windows 98
Setup disk and select OK.
Click Finish
If prompted, Restart Your
Computer to complete the installation.
Page 8
Macintosh OS X 10.1 Users
Follow these steps to complete installation under Macintosh OS X 10.1.
Insert the DUB-C2 Driver CD
into the CD-ROM drive.
Double-click DUB-C2 when it
appears on the desktop
Drag-&-drop
USB2EHCI_V1033_1130.img
to the desktop
Double-click
USB2EHCIV1033_1130.IMG
from the
desktop
Double-click
USB2EHCI_V1033 when
it appears on the desktop
Double-click
USB2EHCI_V1033.pkg
Page 9
Macintosh OS X 10.1
Click the Lock
Enter your Name
& Password
Click OK
Click Continue
Page 10
Macintosh OS X 10.1
Select a
Destination
Volume
Click Continue
Click Install
Click Continue
Installation
Page 11
Macintosh OS X 10.1
Click Restart
Typical DUB-C2 Installation
Once properly installed, the DUB-C2 Hi-Speed USB 2.0 2-Port Cardbus Adapter can
be used to connect both USB 2.0 and USB 1.1 devices to any of its two USB ports.
The diagram below shows a typical installation using the DUB-C2 and other USB devices.
Page 12
Introduction to USB 2.0 and Helpful Tips
Introduction
USB stands for Universal Serial Bus. It is a standard for connecting external devices to your computer quickly and easily. One of the nice things
about USB is that power can be provided to the USB device through the
USB cable. However, some devices such as printers need more power
than the USB ports can provide, so those devices will have to use an
external power source. USB also allows the device to be connected and
removed from the PC without the need to shut -down the computer.
USB 2.0 is the second generation standard that improves on USB 1.1 to
provide faster and more reliable data transfers. USB 1.1's speed of
12Mbps is extended to 480Mbps in USB 2.0. The improved speed and
bandwidth opens up the possibility for newfound solutions such as external
backup or data storage solutions, as well as digital audio and video
solutions.
One important feature of the USB 2.0 standard is that it is backward
compliant with USB 1.0 and USB 1.1. This means that all of your current
USB products will work with USB 2.0 adapters.
Many USB products are widely available on the market and more are
being developed for future release. Because of the high speed of the USB
interface, a USB hub can be used to connect more than one USB device
to one USB port at one time. The USB standard specifies that up to 127
devices can be connected to your computer.
Helpful Tips
• When connecting the USB cable to the computer, make sure that the
USB cable is inserted securely.
• Remember that when connecting USB 1.0 or USB 1.1 products into a
USB 2.0 adapter, the USB 1x product will not work faster.
• To ensure optimal performance when using USB 2.0 devices, use a
USB 2.0 certified cable such as the DUB-C5AB.
• The DUB-C2 will work in Macintosh OS 8/9 at USB 1.1 speeds using
the built-in drivers for the appropriate operating system.
Page 13
Technical Support
You can find the most recent software and user documentation on
the D-Link website.
D-Link provides free technical support for customers within the
United States for the duration of the warranty period on this product.
U.S. customers can contact D-Link technical support through our
web site or by phone.
D-Link Technical Support over the Telephone:
(877) 45D-LINK
(877) 453-5465
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
email: support@dlink.com
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DUB-C2.11222002
Loading...