D-Link DGS-3130-30PS/SI User Manual

Product Highlights

Rich L2 and L3 Features

An integrated software image that provides powerful
L2 and L3 features to full dierent applications’
requirements, capable of building solid networks

Embedded 10G Ports

Six embedded high-speed 10G ports simplify the
network deployment by providing versatile options
for uplink connections

Scalability and High Availability

Physical stacking provides agile expansion and
redundancy while reliability through fault-tolerant
topologies ensures rock-solid connectivity

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

Features

High Availability and Flexibility

• 24/48 x 10/100/1000BASE-T PoE or non-PoE
ports, or 24/48 x SFP ports

• 2 x 10GBASE-T and 4 x 10G SFP+ embedded
uplink ports

Reliability

• Redundant power supply (RPS) support

• Ethernet Ring Protection Switching (ERPS) for
single ring topologies

• Embedded 6 kV surge protection on all Gigabit
Ethernet ports

• IEEE 802.3D/802.1s Spanning Tree

• Loopback Detection (LBD)

L3 Features

• Static Route

• RIP

• RIPng

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to

address the needs of small to medium-sized business networks. A unied software image

incorporates L2 and L3 features enabling the family to be deployed in a variety of environments

and topologies. Together the hardware and software enhancements combine to create a family

of powerful, exible and cost-eective switches.

With a variety of port congurations, each DGS-3130 series switch has six embedded 10G

uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports make selecting a stacking

interface convenient.

Enhanced Network Reliability

The DGS-3130 Series is designed to be used in Enterprise and metro Ethernet applications.

Incorporating high levels of network security, multiple management options and exible

stacking congurations, the DGS-3130 series ensures maximum uptime. All the models in the

family support an additional external redundant power supply to ensure continued operation.

These switches integrate essential reliability features to enhance network resilience, including

802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), and 802.1s Multiple Spanning

Tree (MSTP), Loopback Detection (LBD), and Broadcast Storm Control. G.8032 Ethernet Ring

Protection Switching (ERPS) minimises the recovery time to 50ms. For load sharing and

redundancy in a switch cascading/server attachment conguration, the DGS-3130 Series

provides dynamic 802.3ad Link Aggregation Port Trunking.

Comprehensive Security

The DGS-3130 Series includes the latest security features such as Multi-layer and Packet

Content Access Control Lists (ACL), Storm Control, and IP-MAC-Port Binding (IMPB) with DHCP

Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address

with an associated MAC and dene the port number to enhance user access control. With

the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP

packets and saving them to the IMPB white list.

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

Easy Access Control Policies

The DGS-3130 Series supports multiple authentication mechanisms such as

802.1X, Web-based Access Control (WAC), and MAC-based Access Control

(MAC) for strict access control and easy deployment. After authentication,

individual policies such as VLAN membership, QoS policies, and ACL rules can

be assigned to each host. In addition, the switch also supports Microsoft® NAP

(Network Access Protection). NAP is a policy enforcement technology that

allows customers to protect network assets from compromised computers by

enforcing compliance with network health policies.

Versatile Trac Management

A rich set of multi-layer QoS/CoS features ensure that critical network services

such as VoIP, video conferences, IPTV, and IP surveillance are always given

high priority. Trac Shaping features guarantee bandwidth for these services

when the network is busy. L2 Multicast support enables the DGS-3130 Series

to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows

multiple multicast subscribers per physical interface while ISM VLAN allows

the switches to send multicast streams in a multicast VLAN to save bandwidth,

and to provide better security to the backbone network. The ISM VLAN proles

allow administrators to bind or replace the pre-dened multicast registration

information to subscriber ports quickly and easily.

Technical Specications

Interfaces DGS-3130-30TS DGS-3130-30S DGS-3130-30PS

Ports • 24 x 10/100/1000BASE-T ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

Console Port • 10/100/1000BASE-T RJ-45 port for out-of-band CLI management

Management Port • 10/100/1000BASE-T RJ-45 port for out-of-band IP management

Stacking Ports • 4

Stacking Cost

USB Ports • 1 x USB 2.0 Type A port

1

• 24 x SFP ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

• 1

• 24 x 10/100/1000BASE-T PoE ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

Performance

Switching Capacity • 168 Gbps

64-Byte Packet Forwarding Rate • 125 Mpps

Packet Buffer Memory • 2 MB

PoE

PoE Standards - - • IEEE 802.3af, IEEE 802.3at

PoE Power Budget - - • 370 W (740 W with DPS-700 RPS)

Physical

MTBF (Hours) • 900,546 hours • 487,153 hours • 409,054 hours

Acoustics • Max: 52.5 dB

• Min: 33.5 dB

Heat Dissipation • 104.65 BTU/h • 281.16 BTU/h • 1609.41 BTU/h (with 370 W PoE load)

Power Input • 100 to 240 VAC, 50 to 60 Hz

Max Power Consumption • 30.76 W • 82.4 W • 471.67 W (with 370 W PoE load)

Dimensions (W xD x H) • 440 x 250 x 44 mm • 440 x 250 x 44 mm • 440 x 350 x 44 mm

Weight • 2.98 kg • 3.21 kg • 4.66 kg

Ventilation • 1 x Smart fan • 3 x Smart fans • 3 x Smart fans

Operation Temperature • 0 to 50 ˚C (32 to 122 °F)

• Max: 54 dB

• Min: 41.1 dB

• Max: 53.4 dB

• Min: 40.4 dB

• 3043.97 BTU/h (with 740 W PoE load)

• 892.1 W (with 740 W PoE load)

Storage Temperature • -40 to 70 ˚C (-40 to 158 °F)

Operating Humidity • 10% to 90% RH

Storage Humidity • 5% to 90% RH

Emission (EMI) • FCC Class A, CE Class A, VCCI Class A, IC, RCM, BSMI, CCC

Safety • CB, cUL, BSMI, CCC

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

Technical Specications

Interfaces DGS-3130-54TS DGS-3130-54S DGS-3130-54PS

Ports • 48 x 10/100/1000BASE-T ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

Console Port • 10/100/1000BASE-T RJ-45 port for out-of-band CLI management

Management Port • 10/100/1000BASE-T RJ-45 port for out-of-band IP management

Stacking Ports • 4

Stacking Cost

USB Ports • 1 x USB 2.0 Type A port

1

• 48 x SFP ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

• 2

• 48 x 10/100/1000BASE-T PoE ports

• 2 x 10GBASE-T ports

• 4 x 10G SFP+ ports

Performance

Switching Capacity • 216 Gbps

64-Byte Packet Forwarding Rate • 161 Mpps

Packet Buffer Memory • 4 MB

PoE

PoE Standards - - • IEEE 802.3af, IEEE 802.3at

PoE Power Budget - - • 370 W (740 W with DPS-700 RPS)

Physical

MTBF (Hours) • 478,258 hours • 520,861 hours • 356,876 hours

Acoustics • Max: 51.9 dB

• Min: 32.7 dB

Heat Dissipation • 172.72 BTU/h • 446.99 BTU/h • 1662.6 BTU/h (with 370 W PoE load)

Power Input • 100 to 240 V AC, 50 to 60 Hz

Max Power Consumption • 50.62 W • 131 W • 487.26 W (with 370 W PoE load)

Dimensions (W xD x H) • 440 x 290 x 44 mm • 440 x 350 x 44 mm • 440 x 350 x 44 mm

Weight • 3.72 kg • 4.52 kg • 5.14 g

Ventilation • 2 x Smart fans • 5 x Smart fans • 4 x Smart fans

Operation Temperature • 0 to 50 ˚C (32 to 122 °F)

Storage Temperature • -40 to 70 ˚C (-40 to 158 °F)

Operating Humidity • 10% to 90% RH

Storage Humidity • 5% to 90% RH

Emission (EMI) • FCC Class A, CE Class A, VCCI Class A, IC, RCM, BSMI, CCC

Safety • CB, cUL, BSMI, CCC

• Max: 54 dB

• Min: 37.5 dB

• Max: 54.2 dB

• Min: 36.8 dB

• 3097.24 BTU/h (with 740 W PoE load)

• 907.71 W (with 740 W PoE load)

Software Features

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

Stackability • Physical stacking

• Stacking Lite

• Up to 9 units per stack or up to 12
stacking cost per stack

L2 Features • MAC Address Table: 16K (16,384)

entries

• Flow Control

• 802.3x Flow Control

• HOL Blocking Prevention

• Jumbo Frames up to 9 Kbytes

• 802.3ad Link Aggregation

• Max. 32 groups per device, 8
Gigabit ports per group

L2 Multicasting • IGMP Snooping

• IGMP v1/v2/v3 Snooping

• Supports 1024 IGMP groups

• Port/Host-based IGMP Snooping
Fast Leave

VLAN • VLAN Group

• Max. 4K VLAN groups

• GVRP

• Max. 4K dynamic VLAN groups

• 802.1Q Tagged VLAN

QoS (Quality of Service) • 802.1p

• 8 queues per port

• Queue Handling

• Strict Priority

• Weighted Round Robin (WRR)

• Strict + WRR

• Supports following actions for flows

• Remark 802.1p Priority Tag

• Remark TOS/DSCP Tag

• Bandwidth Control

1

• Virtual stacking

• D-Link Single IP Management (SIM)

• Up to 32 units per virtual stack

• Spanning Tree Protocols

• 802.1D STP

• 802.1w RSTP

• 802.1s MSTP

• BPDU Filtering

• Root Restriction

• Loopback Detection

• Limited IP Multicast

• Up to 24 IGMP filtering profiles, 128
ranges per profile

• Double VLAN Q-in-Q

• Port-based Q-in-Q

• Selective Q-in-Q

• Port-based VLAN

• 802.1v Protocol VLAN

• Voice VLAN

• MAC-based VLAN

• VLAN translation

• CoS based on

• Switch port

• VLAN ID

• 802.1p priority queues

• MAC address

• IPv4 address

• DSCP

• Protocol type

• TCP/UDP port

• User-defined packet content

• IPv6 address

• IPv6 traffic class

• IPv6 flow label

• Port Mirroring

• One-to-One

• Many-to-One

• Flow-based

• RSPAN Mirroring

• Ethernet Ring Protection Switching
(ERPS)

• Single ring topology

• MLD Snooping

• MLD v1/v2 Snooping

• Support 1024 MLD Groups

• Host-based MLD Snooping Fast
Leave

• ISM VLAN

• Asymmetric VLAN

• Private VLAN

• VLAN Trunking

• Super VLAN

• Bandwidth Control

• Port-based (ingress/egress, min.
granularity 8 Kbps)

• Flow-based (ingress/egress, min.
granularity 8 Kbps)

• Three Color Marker

• CIR/PIR minimum granularity: 8
kbps

• Two Rate Three Color Marker
(trTCM), CBS/PBS

• Single Rate Three Color Marker
(srTCM), CBS/EBS

Access Control List (ACL) • ACL based on

• 802.1p priority

• VLAN ID

• MAC address

• Ether Type

• IPv4 address

• DSCP

• Protocol type

• TCP/UDP port number

• User-defined packet content

• IPv6 address

• IPv6 flow label

• IPv6 traffic class

Security • SSH v2

• SSL v1/v2/v3

• Port Security

• Up to 64 MAC addresses per port

• IP-MAC Port Binding

• DHCP Snooping

• Supports up to 500 address binding
entries

• Supports up to 2048 ingress access
entries

• Supports up to 512 egress access
entries

• Time-based ACL

• CPU Interface Filtering

• Broadcast/Multicast/Unicast Storm
Control

• Traffic segmentation

• D-Link Safeguard Engine

• NetBIOS/NetBEUI Filtering

• IPv6 ND Snooping

• DHCP Server Screening

• ARP Spoofing Prevention

• DoS Attack Prevention

• BPDU Attack Protection

• ARP Packet Inspection

• IP Packet Inspection

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

AAA • 802.1X:

• Port-based Access Control

• Host-based Access Control

• Identity-driven Policy (VLAN, ACL
or QoS) Assignment

• Authentication Database Failover

• Web-based Access Control (WAC):

• Port-based Access Control

• Host-based Access Control

• Identity-driven Policy (VLAN, ACL
or QoS) Assignment

• Authentication Database Failover

Green Features • Compliant with RoHS

• Power saving by Link Status

OAM • Cable diagnostics • Hardware-based Dying Gasp • 802.3ah Ethernet Link OAM

Management • Web-based GUI

• Command Line Interface (CLI)

• Telnet Server

• Telnet Client

• TFTP Client

• DNS Client

• Secure FTP Server

• ZModem

• SNMP v1/v2c/v3

• SNMP Traps

• System Log

• sFlow

• Multiple images

• MAC-based Access Control (MAC):

• Port-based Access Control

• Host-based Access Control

• Identity-driven Policy (VLAN, ACL
or QoS) Assignment

• Authentication Database Failover

• Guest VLAN

• Power saving by cable length

• Time-based PoE

• Multiple Configurations

• RMON v1:

• Supports 1,2,3,9 groups

• RMON v2:

• Supports ProbeConfig group

• LLDP

• BootP/DHCP Client

• DHCP Auto-Configuration

• DHCP Relay

• DHCP Client Option 12

• DHCP Relay Option 18, 37, 82

• Flash File System

• PPPoE Circuit-ID Tag Insertion

• Microsoft® NAP

• Support 802.1X NAP

• Support DHCP NAP

• RADIUS Accounting

• RADIUS and TACACS+ authentication
for switch access

• Four levels of User Account Control

• IEEE 802.3az Energy-Efficient
Ethernet (EEE)

• CPU monitoring

• Debug command

• SNTP

• NTP

• Password recovery

• Password encryption

• Trusted Host

• ICMPv6

• DHCP server

L3 Features • Max. 16 IP interfaces

• ARP Proxy

L3 Routing • Static Route

• 1,024 shared between IPv4/IPv6

• Max. 512 IPv4 entries

• Max. 512 IPv6 entries

L3 Multicasting • IGMP Filtering

• Port-based filtering

• VLAN-based filtering

MIB • RFC 1213 MIB II

• RFC 4188 Bridge MIB

• RFC 1157, 2571-2576 SNMP MIB

• RFC 1907 SNMPv2 MIB

• RFC 1757, 2819 RMON MIB

• RFC 2021 RMONv2 MIB

• RFC 1398, 1643, 1650, 2358, 2665
Ether-like MIB

• RFC 2674 802.1p MIB

RFC Standard Compliance • RFC 768 UDP

• RFC 791 IP

• RFC 792, 2463, 4443 ICMP

• RFC 793 TCP

• RFC 826 ARP

• RFC 3513, 4291, IPv6 Addressing
Architecture

• RFC 2893, 4213 IPv4/IPv6 dual stack
function

• RFC 2463, 4443 ICMPv6

• IPv6 Neighbour Discovery (ND) • VRRP

• RIPv1/v2/ng

• RFC 2233, 2863 IF MIB

• RFC 2618 RADIUS Authentication
Client MIB

• RFC 2620 RADIUS Accounting

• Client MIB

• RFC 2925 PING & TRACEROUTE MIB

• RFC 2674, 4363 802.1p MIB

• RFC 1065, 1066, 1155, 1156, 2578 MIB
Structure

• RFC 2462, 4862 IPv6 Stateless
Address Auto Configuration

• RFC 2464 IPv6 Ethernet and
definition

• RFC 1981 Path MTU Discovery for
IPv6

• RFC 2460 IPv6

• RFC 2461, 4861 Neighbor Discovery
for IPv6

• RFC 783 TFTP

• RFC 1215 MIB Traps Convention

• RFC 1212 Concise MIB Definitions

• RFC 1215 MIB Traps Convention

• RFC 1157, 2571-2576 SNMP MIB

• RFC 4022 MIB for TCP

• RFC 4113 MIB for UDP

• RFC 4293 IPv6 SNMP Mgmt Interface
MIB

• RFC 2737 Entity MIB (version 2)

• RFC 2068 HTTP

• RFC 1492 TACACS

• RFC 2866 RADIUS Accounting

• RFC 2474, 3260 DiffServ

• RFC 1321, 2284, 2865, 3580, 3748
Extensible

• Authentication Protocol (EAP)

• RFC 2571, 2572, 2573, 2574, SNMP

• RFC 854 Telnet

• RFC 951, 1542 BootP

DGS-3130 Series

Gigabit Layer 3 Stackable Managed Switches

Optional Accessories

DEM-CB100S 1 m 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S 3 m 10G SFP+ Direct Attach Cable (DAC)

Optional Redundant Power Supplies

DPS-500A AC Redundant Power Supply for DGS-3130-30TS, DGS-3130-30S, DGS-3130-54TS and DGS-3130-54S

DPS-700 AC Redundant Power Supply for PoE Models DGS-3130-30PS and DGS-3130-54PS

Optional SFP Transceivers

DGS-712 1000BASE-T Copper SFP Transceiver

DEM-310GT 1000BASE-LX, Single-mode, 10 km

DEM-312GT2 1000BASE-SX, Multi-mode, 2 km

Optional SFP+ Transceivers

DEM-431XT 10GBASE-SR Multi-mode, OM1:33M/OM2:82M/OM3:300M (w/o DDM)

DEM-432XT 10GBASE-LR Single-mode, 10 km (w/o DDM)

1

When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9.
When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6.
When stacking dierent models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS­ 3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

For more information: www.dlink.com

D-Link European Headquarters. D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom.

Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2018 D-Link Corporation. All rights reserved. E&OE.

Updated October 2018