D-Link DCS-825L Quick Guide

Wi-Fi Baby Camera
DCS- 825L

Quick Installation Guide

Before you get started...

• Please save this guide for future reference.

• Please read these instructions before using your product.

• Do not cover the ventilation holes.

• Do not cover this product with a blanket.

• Do not allow children to play with this product.

• Do not allow this product to get wet. Only use a dry cloth to clean it.

• Do not place this product near water or other liquids, such as near a
sink, shower, or bathtub.

• Do not attempt to open or disassemble this product.

• Cleaning: Clean the camera with a dry cloth only; do not allow
the camera to get wet. The sticky pad on the desktop base may be
cleaned with water and air dried(do not use a cloth to dry it); make
sure the base is completely dry before using it with the camera again.
Strangulation Hazard: Keep this product and any attached cords at
least 3 feet out of reach of a child. Keep any attached cords out of
your baby's crib/cot.

• This product is not a replacement for responsible adult supervision.

Check to make sure your box has these items:

1

En glis h

Wi-Fi Baby Camera
(DCS-825L)

Desktop base Wall mount kit

Pink accent rings

Power adapter

If any of these items are missing from your packaging, contact your reseller.

DCS -82 5L

1

Plug in your camera, and wait until the Power

2

En glis h

LED turns green.

You can use the included power adapter, or you can use a portable USB
battery(not included) that can supply 5 V / 2 A of power.

Download and run the free mydlink Baby

3

Camera Monitor app to set up your camera.

Search for the free mydlink Baby Camera Monitor on the App Store or
Google Play, then download and run the app. The app will guide you step by
step through the setup process.

2

DCS -82 5L