D-LINK DCS-3110 User Manual

MEGAPIXEL PoE NETWORK CAMERA

DCS-3110

Quick Installation Guide+

Installations-Anleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

Quick Installation Guide

DCS-3110

Megapixel PoE Network Camera

Package Contents

If any of the items are missing, please contact your reseller.

DCS-3110 Megapixel PoE

Network Camera

CD-ROM with Manual and Setup Wizard

CAT5 Ethernet Cable

Power Adapter Camera Stand

Hardware Installation

Connect the Ethernet Cable

Connect an Ethernet cable to the network cable connector located on the Internet Camera’s back panel and attach it to the network.

Connect Using Power-Over-Ethernet

Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3110 will turn green to indicate a proper connection.

Attach the External Power Supply

Attach the external power supply to the DC power input connector located on the Network Camera’s back panel (labeled DC 12V) and connect the other end to an AC power outlet.

Note: The LED on the network camera will turn green, when you have a proper connection,. The light may go on and off and your computer may show an intermittent loss of connectivity, this is normal until you have configured your Network Camera.

Troubleshooting

1. Why does the Megapixel PoE Network Camera work locally but not externally?

‧

This might be caused by network firewall protection. The setting of the firewall may need to be

changed in order for the Megapixel PoE Network Camera to be accessible outside of your local LAN. Check with the Network Administrator for your network.

‧

Make sure that your Megapixel PoE Network Camera isn’t conflicting with any Web server you may

have running on your network.

‧ The default router setting might be a possible reason. Check that the configuration of the router

settings allows the Megapixel PoE Network Camera to be accessed outside of your local LAN.

2. Noisy images occur. How can I solve the problem?

The video images might be noisy if the Megapixel PoE Network Camera is used in a very low light environment. To solve this issue you need more lighting.

3. The images appear to be of poor quality, how can I improve the image quality?

‧ Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256

colors on your computer will produce dithering artifacts in the image, making the image appear to be of poor quality.

The configuration on the Megapixel PoE Net‧ work Camera image display is incorrect. Through the

Advanced > Image Setup

parameters such as brightness, white balance and power line frequency for fluorescent light.

4. Can the Megapixel PoE Network Camera be used outdoors?

The Megapixel PoE Network Camera is not weatherproof. It needs to be equipped with a weatherproof case for outdoor use but it is not recommended.

5. Can the network camera be installed and work if a firewall exists on the network?

If a firewall exists on the network, port 80 is open for ordinary data communication. The DCS-3110 uses port 554 for RTSP streaming. These ports – or the ports that you specified in the Setup Tab in the Configuration screen – need to be opened on the firewall.

6. Why am I unable to access the Megapixel PoE Network Camera from a web browser?

If a router or firewall is used on the network, the correct ports for the DCS-3110 may not be configured on the router or firewall. To correct the problem, you need to determine if the DCS-3110 is behind a router or firewall and if the router or firewall is properly configured for the ports the DCS-3110 is using. Refer to Page 28 for help in opening the correct ports on a router or firewall for use with the DCS-3110. Other possible problems might be due to the network cable. Try replacing your network cable. Test the network interface of the product by connecting a local computer to the unit, utilizing an Ethernet crossover cable. If the problem is not solved the Megapixel PoE Network Camera might be faulty.

7. What is the maximum number of users that can access DCS-3110 simultaneously?

The maximum number of users that can log onto the Megapixel PoE Network Camera at the same time is 10. Please keep in mind the overall performance of the transmission speed will be reduced if many users have logged on to the camera simultaneously.

(For further troubleshooting, please refer to the User manual on the CD ROM)

Other carriers could be lower. Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm

€0.05ppm peak, €0.045ppm off peak Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm

section of the Web management you need to adjust the image related

Technical Support

D-Link UK & Ireland Technical Support over the Telephone:

BT 3ppm peak, 1.5ppm off peak, 0.5ppm weekends. (UK Pence per minute).

08456 12 0003 (United Kingdom)

+1890 886 899 (Ireland)

D-Link UK & Ireland Technical Support over the Internet:

http://www.dlink.co.uk

ftp://ftp.dlink.co.uk

Schnellinstallationshandbuch

DCS-3110

Megapixel PoE Network Camera

Paketinhalt

Wenn eines dieser Elemente fehlt, wenden Sie sich bitte an Ihren Vertriebspartner.

DCS-3110 Megapixel PoE

Network Camera

CD-ROM mit Handbuch und Setup-Assistent

CAT5-Ethernet kabel

Stromadapter Kamerastativ

Hardware-Installation

Anschluss des Ethernet-Kabels

Schließen Sie das Ethernet-Kabel an den Netzwerkkabelanschluss auf der Rückseite der Internet-Kamera an und verbinden Sie es mit dem Netzwerk.

Verbindung mithilfe von Power-Over-Ethernet

Sobald Sie ein Ethernet-Kabel an Ihren PoE Switch oder Adapter angeschlossen haben, leuchtet die Stromversorgungs-LED auf dem DCS-3110 grün. Das zeigt an, dass die Verbindung korrekt hergestellt ist.

Anschluss der externen Stromversorgung

Schließen Sie die externe Stromversorgung an den Gleichstromeingang auf der Rückseite der Netzwerkkamera (durch DC 12V gekennzeichnet) an und stecken Sie das andere Ende in eine Wechselstrom-Steckdose.

Die LED auf der Netzwerkkamera leuchtet grün, sobald die Verbindung korrekt hergestellt ist.

Hinweis:

Es ist möglich, dass das Licht an und aus geht und Ihr Computer zwischenzeitlich die Verbindung zu verlieren scheint. Das ist normal und ändert sich, sobald Sie Ihre Netzwerkkamera konfiguriert haben.

+ 8 hidden pages