D Link DBT900APA1 User Manual
t
r
DBT -900AP
Bluetooth-to-LAN Access Poin
Check Your Package Contents
These are the items included with your DBT-900AP purchase:
D-Link PersonalAir™
• DBT-900AP Bluetooth-to-LAN Access Point
• Power Adapter
• RJ-45 LAN Cable
If any of the above items are missing, please cont act your reseller .
©2003 D-Link Corp. All rights reserved. Trademarks or registered trademarks are the property of thei
Connect the DBT-900AP Bluetooth Access Point
to Your Network
Straight up the antenna of the DBT-900AP
You may need to adjust the direction of the antenna to get better signal strength.
Attach the External Power Supply for DBT-900AP
Attach the external power supply to the DC power input connector located on the rear p an el of DBT-900AP and
connect it to your local power supply. The Power LED will turn ON to indicate proper operation.
Connecting DBT-900AP to Your Network
Insert one end of the cable to the Ethernet port on the back panel of the DBT-900AP and the other end of the
cable to an Ethernet Broadband Router (i.e., D-Link DI-604) or Switch (i.e., D-Link DES-1005D) that supports
DHCP Client function. The LAN LED light will illuminate to indicate a proper Ethernet connection.
Note: The Ethernet Port on DBT-900AP is Auto-MDI/MDIX. Meaning you can use a straight-through or
crossover-Ethernet cable to connect to the Ethern et port on the DBT-900AP.
Connect Bluetooth-enabled computers to
DBT-900AP
Note:
This Access Point supports the state-of-the-art PAN profile. Please make sure if your Bluetooth Software
installed in your computers or PDAs support this profile before this step.
This Access Point does not need to install any specific driver; it requires the Bluetooth adapter (for example:
D-Link DBT-120 USB Bluetooth Adapter) to be installed on the PC or laptop computer in order to access to the
DBT-900AP wirelessly.
The step-by-step instructions that follow are shown with Widcomm Bluetooth Software (version 1.4 or above)
that included with D-Link DBT-12 0 USB Bluetooth Adapter under Windows 98SE/ME/2000.
Right-click to the “B” logo on the system tray and choose “Explorer” or double click “My Bluetooth Places” to
open Bluetooth Adapter.
Double-Click the “Find Bluetooth Devices” to have USB Bluetooth Adapter to find the DBT-900AP.
Note: Before searching, please make sure the DBT-900AP is in the range, up to 20 meter, from DBT-120
D-Link USB Bluetooth Adapter .
Once the DBT-900AP is found by USB Bluetooth Adapter, double-click the icon of the unit.
Loading...