Denver MTW-731TWIN User Manual

Table of Contents

Contents

Table of Contents

Safety Precautions

Before Use(Continued)

Identification of Controls

Main Unit Remote control unit

Insert the battery

Getting Started

DVD Introduction

Playing a DVD or Video CD(Operation)

Basic operation

Audio CD and MP3/WMA Disc Features Playing an Audio CD or MP3/WMA Playing a JPEG Disc Program playback(not for Picture CD/MP3)

P3-P4

P5-P7

P6 P7

P7-P9

P8-P9

P10-P13

P10

P11

P11-P12

P13

SETUP Menu Setting

General Operation

General Setup Page

Audio Setup Page

Dolby Digital Setup

Preference Page

Password Setup Page

LCD Setup menu

Parameters and specifications

Troubleshooting tips

Definition of terms

P14-P21

P9-P10

P14

P9-P10

P14-P16

P16-P17

P18

P9-P10

P19-P20

P9-P10

P21

P9-P10

P22

P9-P10P9-P10P9-P10

P23

P9-P10

P24

P25

P9-P10P9-P10

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning:To reduce the risk of electric shock,do not remove the cover or back of this product.There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water,rain, or moisture. Do not place objects filled with water such as vases, on the Product.

Warning: This digital video disc player employs a laser system. Use of controls,adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure.

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without permission.

This product features the copy protection function developed by Macrovision.Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear.This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision Corporation. Reverse engineering or disassembly is prohibited.

Warning: To prevent direct exposure to laser beam,do not open the enclosure.Visible laser radiation when open.

Warning: Never stare directly into the laser beam.

Caution: Do not install this product in a confined space such as a book case or similar unit.

SERIAL NUMBER:

You can find the serial number on the back of the unit.This number is unique to this unit and not available to others.You should record requested information here and retain this guide as a permanent record of your purchase.

Model No. ______________________________ Serial No. ______________________________ Date of Purchase_________________________

Before Use(Continued)

Introduction

To ensure proper use of this product, please read this owner's manual carefully and retain for future reference.

This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.

Symbol Used in this Manual

The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock.

The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions.

Indicates hazards likely to cause harm to the unit itself or other material damage.

Note:

Indicates special notes and operating features.

Tip: Indicates tips and hints for making the task easier.A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

DVD

DVD and finalized DVD+R/RW

VCD

Video CDs

Audio CDs

MP3

MP3 Discs

WMA

WMA Discs

JPEG

JPEG Discs

MPEG4

MPEG4 Discs

About the Symbol Display

¡° ¡±may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that specific DVD video disc.

Notes on Discs Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing,store the disc in its case.Do not expose the disc to direct sunlight or source of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing,clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol,benzine,thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Before Use (Continued)

Types of Playable Discs

_________________________________________

In addition, this unit plays , DVD -R, DVD +R,DVD -RW,DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio titles,MP3, WMA,JPEG and MPEG4 files.

_________________________________________

DVD (8 cm / 12 cm disc)

Video CD (VCD) (8 cm / 12 cm disc)

Audio CD (8 cm / 12 cm disc)

C0MPATIBLE

Notes:

1.Depending on the conditions of the recording equipment or the CD-R/RW (or DVD -R, DVD +R,DVD -RW, DVD +RW) disc itself, someCD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played on the unit.

2.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

3.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in malfunctions.

4.Some playback operations of DVDs and Video CDs may be

intentionally programmed by software manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the software manufacturer, therefore some playback features may not be available or other functions may be added.

This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format.

Manufactured under license from Dolby Laboratories."Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

Region code

This DVD player is designed and manufactured for playback of region "2"encoded DVD software. This unit can play only DVD discs labeled "2" or "ALL".

Notes on Region Codes

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player's region code or the disc cannot play. If you try to play a DVD with a different region code from your player,the message "Check region Code" appears on the TV screen.

Identification of Controls

Remote control unit

1. PLAY/PAUSE ( )

Starts playback or pause playback.

2. STOP ( ) Stops playback.

3. Reverse Skip ( ) Go to previous chapter / track or to the beginning.

4. Forward Skip( )

Go to the next chapter / track.

5.ZOOM

Enlarges video image.

6.REPEAT

Repeat chapter, track, title all.

7.A B

Repeat sequence.

8. PROGRAM

Place a track on the program list.

9. MUTE

Disable Audio output.

10.TITLE

Return to DVD title menu.

11.POWER

Switches DVD Player standby mode.

12.0-9 NUMBER BUTTON

Selects numbered items in a menu.

13.ENTER

Confirms menu selection.

1010

2626

1818

1919

1111

1717

1313

1515

14. MENU

Accesses menu on a DVD disc. (Left/right/up/down)

15.DISPLAY

Accesses On-Screen display.

16.AUDIO

Selects an audio language (DVD).

SOURCE

ANGLE PBC

6 6

REPEAT

PROGRAM

GOTO

MUTE

STEP

MODE

2525

2323

2727

2020

1616

2222

1414

17.SUBTITLE

Selects a subtitle language.

18.ANGLE

1212

Selects a DVD camera angle if available

19.SETUP

2121

Accesses or removes setup menu.

20.10+ BUTTON

Add 10+ while your selection is more than10.

2424

21.STEP

Step the motion.

22. BUTTON

Fast backward.

23. BUTTON

Fast forward.

24. PBC

PBC on/off switch.

25.MODE

It should be enter TFT menu adjust TFT.

26.SOURCE

Switch DVD and AV.

27.GOTO

Goto time point , title or chapter you want in DVD Mode

Identification of Controls

Getting Started

Insert the battery

1.Open the battery door.

2.Insert two AAA size batteries.

1 2

Refer to the drawing, take the back cover of the remote control off and remove the empty battery receptacle.

Prior to shipping, a separating film was applied to the battery. Remove this film.

Insert the battery into the receptacle and insert the receptacle into the remote.

For the best results,aim the remote towards at the player's receiving window. Stay within 15 feet and angles of 60 degrees or less.

Under normal use the battery will last for one year.

Remove battery during storage or when you are not using the DVD player for a long time.

DVD Introduction

DVD+R/RW

DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc only once. DVD +RW and DVD -RW are two standards for re-writable media, meaning the DVD content can be erased and re-recorded. Single-sided discs can hold 4.38 gigabytes and double-sided discs hold twice as much.There are no dual layer single sided recordable discs.

VCD (Video CD)

A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along with quality stereo sound.

MPEG

MPEG is an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, and MPEG audio.

MP3

MP3 is a popular compression format used for digital audio files that yields very high near-CD quality.

WMA

Windows media audio file. A type of coding / decoding developed by Microsoft Corp.

JPEG

Joint Pictures Expert Group. JPEG is a compressed file format that allows you to save images with no limit on the number of colors.

MPEG4

MPEG4 is the name of a revolutionary new video codec.which is based On the new MPEG-4 compression standard for video.You will be able to play MPEG4 movies using this DVD player.

Title (DVD video discs only)

A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, and cast interviews could be title 3. Each title is assigned a reference number enabling you to locate it easily.

Getting Started

Playing a DVD or Video CD(Operation)

Playback Setup

1. turn on the power switch at the left side of the product.

2. Press OPEN to open the disc tray and insert your chosen disc in the tray, with the playback side down.

3. Close the tray. Playback will start automatically.

DVD

Use the buttons to select the title/chapter you want to view, then press ENTER to start.Press MENU to return to the menu screen.

VCD

Use the number buttons to select the track you want to view and press MENU to return to the menu screen. Menu settings and operating procedures may differ.Follow the instructions on the each menu screen.

Notes:

1.If parental control is set and the disc isn't fit for the rating setting you must input the password.(See "parental" on page 22).

2.DVDs may have a region code.Your player does not play discs that have a region code different from your player.

3.Unless stated otherwise,all operations described use the remote control.Some features may also be available on the setup menu.

DVD

Moving to another CHAPTER/TRACK

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

1.Press SKIP or briefly during playback to select the next (or previous)chapter/track or to return to the beginning of the current chapter/track.

Most of the functions can be controlled by remote control unit.Most of the functions can be controlled by remote control unit.Most of the functions can be controlled by remote control unit.Most of the functions can be controlled by remote control unit.

2.Press SKIP twice briefly to step back to the previous chapter/track.

3.To go directly to any chapter during DVD playback, input the chapter/track number .

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a different audio channel (Stereo, Left, or Right).

DVD

Repeat A-B

To repeat a sequence.

1. Press A-B at your chosen starting point " A". Appears briefly on the TV screen.

2. Press A-B again at your chosen end point." AB" appears briefly on the TV screen and the repeat sequence begins.

3. Press A-B again to cancel.

Repeat

You can play a title/chapter/all/track on a disc repeatedly. Press REPEAT during playback to select a desired repeat mode.

DVD

VCD

+ 18 hidden pages