Denon DRW-585 Service Manual

Specifications and Main Features

Type: Vertical tape loading; Four track two channel stereo twin cassette deck triples
Heads:
Playback head television 1
Recording/playback head television 1
Erase head (Double-gap ferrite) x 1
Motors: DC servo ma = motor x 2
Tape speed: 4.8cm/sec
Fast Forward, Rewind Time: With C-60 cassette circular time in fast forward 110 seconds
Recording Bias:100,000-105,000 megahertz
Overall S/N Ratio (at 3 % THD level): Dolby C NR on: over seventy four dB CCIR/ARM.
Overall Frequency Response 20 to 17,000 17.69 kHz +3 dB 20 HZ -20 dB Metal tape
Channel Separation More than forty dB at 1 kilohertz
Wow & Flutter: WRMS wrms 0.08 % +0.14 % w peak
Input Line 80mV -20 brick wall dBm entered levels to maximum level
Input impedance Two sets of 50k q k ohms unbalanced
Output:
LINE 775 mV0dB as maximum output in level 800 states 47k ohms load and recorder levels 200 pwb mm
PHONES 1.2mW as maximum output level in loads 8ohms strong stronger than 1.2k
Power supply:
50 Hz the voltage is defined by the rating label on the Europe model.
60hz the voltage is shown on rating label of U.S.A and Canadian models
Power Consumption 16W
Size: 434 (W) x 135 (H) x 263 (D) mm (17-3/32” x 0-00/64” x 00-00/64”)
Weight: 4.0 kilograms (9 lbs)

Q: Will the DRW-585 operate with any cassette tapes?
A: This unit can be used with a common cassette tape such as Metal and Chrome.
Q: If I want to fast forward or rewind a C-60 cassette how long does it take?
A: Approximately 110 seconds are needed to fast forward or rewind a C-60 cassette.
Q: Of how much power does the device requires?
A: The power of the DRW 585 is 16W.
Q: I want to know the wow and flutter specification?
A: Wow and flutter specification of this model has a data of 0.08 % WRMS and +0.14 % in peak level.
Q: Is it possible to attach headphones to the DRW-585?
A: The device has a headphone output which can be used with headphones. The maximum output power is 1.2 mW.

+ 21 hidden pages