Denon DRA365RD Service Manual
Specifications and Main Features
- Model: DRA-565RD / DRA-365RD
- Continuous Power Output:
- DRA-565RD: 80 W + 80 W (8 ohms, 1 kHz),
- DRA-365RD: 62 W + 62 W (8 ohms, 1 kHz),
- Power Bandwidth (FM): 20 HZ to 40 KHZ
- Total Harmonic Distortion: 03% (rated output at 8 ohms)
- Frequency Response:
- PHONO (MM ): 20 HZ - 20 khz +/- 0.5 DB,
- CO, VIDEO: 200 MV 2 KOHM,
Maximum Input:
Level: PHONO (MM): 28 MV
CO ,VIDEO , TAPE-1 , TAPE-2:200 MV
- Signal to Noise Ratio A (Weighted): 100 dB
- Treble Control: Variable
- Bass Control: Variable
- Loudness Control: Variable
- Tuner Section- AM and FM Radio- Part 2
Receiving Range:
- FM 87.5 MHz to 108.0 MHz
- AM 530 kHz to 1710 kHz
Usable Sensitivity-
- FM 0.9 MV IHF
- AM 15 MV / M
General Specifications- Part 3
- Power Supply AC230V, 50Hz
- Power Consumption
- DRA-565RD: 145 W
- DRA-365RD: 120 W
- Dimensions (W x H x D)
- DRA-565RD: 434 mm x 120 mm x 360 mm
- DRA-365RD: 434 mm x 120 mm x 360 mm
- Weight
- DRA-565RD: 7.2 kg
- DRA-365RD: 6 kg
Frequently Asked Questions
Q1: What speakers are compatible with the DRA-565RD.DRA-365RD products?
A1: The unit can connect a maximum of four speakers; these are designated as Speaker Systems A and B.
Q2: How can I change from AM to FM or vice versa on the tuner?
A2: Use the BAND selector switch on the unit to switch between opposite sides of the AM and FM radio.
Q3: Is it possible to connect headphones to this particular receiver?
A3: This type of equipment has a headphone socket that allows listeners to listen to music on headphones.
Q4: Which antenna would ensure maximum reception for the device?
A4: Indoor FM antenna and AM loop antenna are provided for their respective use. A good antenna can solve many reception-related problems.
Q5: How do you save radio stations to the receiver?
A5: To set a radio station in memory, press the MEMORY key and press the SHIFT/PTY key followed by selecting the memory block that you want to use, then using the PRESET UP / DOWN keys choose the preset channel that you want to use.
Q6: What other devices can be connected to the stereo unit?
A6: Other devices can also be connected through the jacks found at the back side of the receiver marked PHONO, CO, VIDEO, TAPE-1 or TAPE-2.
Q7: Which actions should I take in the event that sound does not come out of my speakers?
A7: The first troubleshooting step is to ensure all the speaker selector switches are TUNED ON and the INPUT SELECTOR is set to the right input. Once that is done, ensure that all the connections are properly switched and corrected.
User Manual
Loading...