Denon DN-HC5000 User Manual

USE IT. LIVE IT.
DN-HC5000
USB MIDI/Audio Interface & controller
Denon DJ is excited to announce the DN-HC5000 – a landmark turnkey digital DJ system powered by the two most powerful companies in mobile entertainment today: Denon DJ and Serato.
What is ITCH?
Serato ITCH is an integrated software and hardware system, designed to give DJs new kinds of control. Serato ITCH software lets you DJ music from your computer using purpose built ITCH hardware, the DN-HC5000.
Features
• Hardware/Software Turnkey solution for the Mobile DJ
• Includes Serato ITCH software
• Dedicated 1:1 Function Structure
• USB MIDI Controller with Built-In Sound Card
• Compatible with PC/MAC
• Internal 24-Bit Processing & USB Audio
• Compatible with CD/MP3 Drive Unit, BU-4500, also sold separately
• Multi Functional Touch Sensitive Jog Disc
• Vibrant FL Tube Display w/ 2-line Character Text Support
• Highly Responsive Soft Rubber Buttons, Switches & Knobs
• High Speed USB 2.0 Interface
DISCOVER MORE AT WWW.DENONDJ.EU
Specifications
General
Power requirement: U.S.A, CANADA model: AC 120 V 60 Hz
European model: AC 230 V 50 Hz
Power consumption: U.S.A, CANADA model: 12 W
European model: 1 2 W Ambient operation temperature: 5 °C to 35 °C Dimensions: 483 (W) x 133 (H) x 92 (max106) (D) mm
rack space: EIA 3U Weight: 3.7 kg Finish: Front panel: Black (Painted steel) Rear & Enclosure: Black (Painted steel)
USE IT. LIVE IT.
DN-HC5000
USB MIDI/Audio Interface & controller
Audio Section
Analogue output: 1, 2 RCA pin: unbalanced
2 Vrms = 0 dBFS DA converter: Type 24 bit 32 times oversampling Fs: 44.1 kHz/48 kHz D-range 106 dB (TYP) S/N 106 dB (TYP) (DIN) Frequency response: 20 to 22 kHz, ±0.5 dB T.H.D: Less than 0.05 % (input = output = 2 Vrms/1 KHz, RL: 10 k) Residual noise: Less than –94 dBV (TYP) Crosstalk: Less than –110 dB (TYP @1 kHz)
USB I/F
USB B connector: USB 2.0 (Max 480 Mbps)
PC/MAC (Host)  DN-HC5000 (Slave) application USB Audio (Speaker) PCM 24 bit 44.1 kHz/48 kHz 4 ch USB HID I/O (General) 32 Byte packet
Control I/F
Fader start: FADER 1
3.5 mm stereo mini jack (Tip/Ring:signal, Sleeve: GND), 0.5 VDC FADER 2
3.5 mm stereo mini jack (Tip/Ring:signal, Sleeve: GND), 0.5 VDC
X-CONTROL: Input
3.5 mm stereo mini jack (Tip/Ring:signal, Sleeve: GND), 0.5 VDC
CD Drive control: Mini-DIN 8 pin connector (DN-D4500/D4000/BU4500 Drive unit control)
Others
Display: 40 mm x 100 mm VFD
Character w/12 digit x 2 line dot matri x & Scratch marker
Jog wheel: 71 mm, touch moving detection
(Touch ON/OFF, Dir FWD/RVS, Pulse count) 1480/740/555/370 Pulse/cycle
* Specifications and design are subject to change without notice for purpose of improvement.
DISCOVER MORE AT WWW.DENONDJ.EU
Loading...