The Operating Manual for updating of DENON A/V receiver/amplifier firmware |
Page 1 / 16 |
The Operating Manual for
updating of DENON A/V receiver/amplifier firmware
DFW (D&M Firmware Writer)
Model Name AVR-3311CIE3 AVR-3311E2 AVR-3311E1C
Version DFW_0043_AVR3311_AVR991_(Rev.1.0.13)
Date 2010-03-31
The Operating Manual for updating of DENON A/V receiver/amplifier firmware |
Page 2 / 16 |
|
Index |
|
1. |
Preparations before starting the operation: ........................................................................ |
.......3 |
1.1 |
Preparation for the Personal Computer:...................................................................................... |
3 |
1.2 |
Preparations for the cables. ........................................................................................................ |
3 |
1.3 |
Connection of the A/V receiver/amplifier and PC ........................................................................ |
4 |
1.4 |
Install the D&M Firmware Writer.................................................................................................. |
4 |
2. |
Procedure of updating for firmware. .................................................................................... |
.......5 |
2.1 |
Notice: ......................................................................................................................................... |
5 |
2.2 |
Procedure of updating for firmware. ............................................................................................ |
5 |
2.3 |
Check the communication between A/V amplifire and PC........................................................... |
6 |
2.4 |
Start the firmware update ............................................................................................................ |
7 |
2.6 |
Complete the firmware update. ................................................................................................... |
7 |
3. |
Confirming the firmware’s number after update. ................................................................ |
.......8 |
4. |
ERROR massage and countermeasure ............................................................................... |
.9~10 |
5. |
Setting of “Run this program in compatibility mode” for Windows Vista......................... |
11~13 |
6. |
Setting of “Run this program in compatibility mode” for Windows 7............................... |
14~16 |
The Operating Manual for updating of DENON A/V receiver/amplifier firmware |
Page 3 / 16 |
1. Preparations before starting the operation:
1.1 Preparation for the Personal Computer: Minimum hardware and software requirements:
Type |
PC/AT compatible |
CPU |
Intel Pentium/Celeron300MHz or faster |
RAM |
256MB or more |
Free hard disc space |
25MB or more |
OS |
Recommend OS: |
|
Windows XP Home Edition / Professional SP1 or more |
|
* Confirmed languages: English, Japanese and German available. |
|
Other language is able to work in PC, but we don’t confirm it. |
|
* “Windows Vista” and “Windows 7 (upper of Home Premium)” are |
|
able to update properly. |
|
* Window 2000 is impossible to use. |
Display resolution |
Super VGA (800x600) or more. |
Port. |
Serial COM port (D-Sub 9pin) |
Communication speed |
RS-232C:115,200bps |
1.2Preparation for the cables.
(1)Preparation for RS-232 cable
Serial Straight Cable for RS-232C consisting of D-Sub 9P(female) and D-Sub 9P(female) cable. D-Sub 9P(male) and D-Sub 9P(male) Gender Changer.
D-Sub 9P(female) and D-Sub |
|
Gender Changer |
9P(female) cable |
|
D-Sub 9P(male) and D-Sub 9P(male) |
Note: There is the RS-232C(Male and Female) 9P cable like the following picture on the market. Then you don’t need to use Gender Changer.
The Operating Manual for updating of DENON A/V receiver/amplifier firmware |
Page 4 / 16 |
1.3 Connection of the A/V receiver/amplifier and PC
Connect the RS-232C cable between RS-232C port of PC and RS-232C port on the Rear panel of A/V Receiver/Amplifier.
|
|
|
|
Rear Panel |
|
|
HUB |
|
|
|
Router |
|
||||||||
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
From Internet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A/V Receiver |
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
(A) |
||||||||||
/Amplifier |
|
|
|
LAN cable |
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
PC |
|
|
|
|
|
RS-232C |
||
|
|
||
|
Straight cable |
|
|
|
|
|
|
1.4Install the D&M Firmware Writer.
1)Please install “DFW_0043_AVR3311_AVR991_(Rev.1.0.13).exe” to any folder of your PC.
2)Please make shortcut icon on your PC.
DFW_0043_AVR 3311_AVR991_( Rev.1.0.13).exe
The Operating Manual for updating of DENON A/V receiver/amplifier firmware |
Page 5 / 16 |
2 Procedure of updating for firmware
2.1 Notice
Please keep the following notice for firmware update.
a)Keep the PC environment refer to 1.1.
b)Avoid the communication cable from the electrical noise source. (E.g. telephone cable, AC line, a fluorescent light)
c)Don’t remove cable during update.
d)Don’t turn off the power during update.
e)Don’t run other PC application during update.
f)Stop the resident program on PC.
g)Stop the screen saver ability on PC.
h)Stop the power save ability on PC.
i)In case of laptop PC, Use the AC adaptor.
2.2Procedure of updating for firmware
2.2.1Please initialize the unit.
1)Turn on the power of unit while pressing the [STANDARD] button and [DSP SIMULATION] button simultaneously.
2)When FL Display will be indicated perfectly, please remove the [STANDARD] button and [DSP SIMULATION] button.
2.2.2Please disconnect “A” Ethernet cable.
CAUTION!:
If you connect LAN cable (Ethernet connection) “A” to A/V rceiver/amplifierre, the “Ether image” firmware of A/V rceiver/amplifierre will be damaged.
Loading...