AV SURROUND RECEIVER
AVR-4311CI Addendum Sheet
Thank you for purchasing DENON’s product. When you operate the unit, please read the owner’s manual and this sheet.
vPage 68 :
Addition
Party mode function
A function has been added when playing back in
party mode that enables attendees to perform
controls such as selecting songs etc.
Also, DENON products that are connected to the
network can control each other.
n Participating in the party mode as
an attendee
Press PARTY.
1
“Enter Party Mode?” is displayed.
• An error message is displayed when you are not
connected to a network.
Press o p to select “Yes”, then press
2
ENTER.
When you start the party mode, the monitor
of the attendee (child) displays the network
menu screen for the organizer (parent).
Press uiop and ENTER to
3
select the desired track.
DENON:[ AVR-4311CI]
Favorit es
Interne t Radio
Media S erver
[1/3]
PARTY ATTENDEE
vPage 93 :
The “Network Setup” – “Other” menu was
changed.
Network Connectin g
Other
Rhapsod y Account
Napster Account
Network Info
Change
MANUAL SETUP
G
NETWORK SETUP
NETWORK SETUP
PC Lang uage
Friendl y Name Edi t
Party M ode Functi on
Party S tart Level
Network Status
Update Notificati on
PC Lang uage
Friendl y Name Edi t
Party M ode Functi on
Party S tart Level
Zone Ma nagement
Update Notificati on
OTHER
OTHER
OTHER
G
⇩
H
H
Before change
After change
vPage 102 :
Addition
Zone management function
DENON products that are connected to the network
can control.
The “Device Control” item was added to the
“Network Setup” – “Other” – “Zone Management”
menu.
With “Device Control”, the network functions
(Internet radio when the input source is NET/
USB etc) of the device selected in step 2 can be
controlled using this product.
Press ui to select “Network Setup”
1
– “Other” – “Zone Management”
from the menu, and then press
ENTER or p.
OTHER
PC Lang uage
Friendl y Name Edi t
Party M ode Functi on
Party S tart Level
Zone Ma nagement
Update Notificati on
Check t he status of other D enon produc ts on
your ne twork and browse the network me nu
Press ui to select the device, and
2
then press ENTER or p.
ZONE MA NAGEMENT
DENON:[ AVR-4311CI ]
ENGLISH
Press ui to select “Device
3
Control”, and then press ENTER.
The monitor of the unit displays the network
menu for the target device.
DENON:[ AVR-4311CI ]
AVR-431 1CIModel
Power
プロキシ
Device Control
ON
NET/USBSelect Source
-24.0dBVolume Level
Enter
RETURN
Return
Press uiop and ENTER to
4
select the desired track.
DENON:[ AVR-4311CI ]
Favorit es
Interne t Radio
Media S erver
iPod
Flickr
Napster
Pandora
MENU
Exit
• When in device control mode,
is displayed on the television screen of the
controlling device, and is displayed
on the television screen of the device being
controlled.
• For information about how to operate, see the
Owner’s Manual provided with the product.
CH+
Vol. up
[1/8]
REMOTE C ONTROL
CH-
Vol. do wn
The party mode function can only be used on a
combination of DENON devices that are equipped
with the party mode function.
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting
The zone management function can only be used
on a combination of DENON devices that are
equipped with the zone management function.
NOTE
The volume of the selected device can be controlled
using this unit, but the volume level is not displayed.
Be careful not to increase the volume too high.