Denon AVR3300 Service Manual
Specifications and Main Features
- AUDIO SECTION
- Rated output:
- Front: 105 W + 105 W 8 Ohms between 20Hz – 20KHz 0.05 % THD
Center: 105 W 8 Ohms between 20Hz – 20KHz 0.05 % THD
Surround: 105 W + 105 W 8 Ohms between 20Hz – 20KHz 0.05 % THD
Dynamic power: 170W+170W (6 Ohms)
Maximum output: 140W + 140W (6 Ohms)
- Input sensitivity/input impedance: 200mV/47kΩ
- Frequency response: 10 Hz ~ 50 KHz +0, -3 dB DIRECT mode Feasibly: 10Hz~50KHz.
- Signal to noise ratio: 102D bn DIRECT mode
- Distortion: 0.01 % (20Hz-20KHz) DIRECT mode
- DIGITAL SECTION
- D/A output: 2V during play at 0dB
- Digital input: Format – Digital audio interface
- VIDEO SECTION
- Input/output level and impedance: 1V p-p, 75 Ohms
- Frequency response: 5Hz – 10MHZ +0, -3dB
- TUNER SECTION
- FM receiving range: 87.50 MHz ~ 107.90 MHz
- Usable sensitivity: 1.0nV
- S/N ratio: 80dB OPT MONO
- Total harmonic distortion: 0.15 % stereo
- GENERAL
- Power supply: AC120V 60Hz, North America model
Frequently Asked Questions
- Q: How wide and tall are the AVR-3300?
- A: The AVR-3300 weighs 15 kgs and has external dimensions of 434 (W) x 171 (H) x 416 (D) mm.
- Q: How does the rated output differ for the front channels?
- A: The rated output 105 W + 105 W at 8 Ω and 20 kHz with a distortion of 0.05%.
- A: AVR-3300 has a weight of 15.0 kg (33 lbs 2 oz) and has a power consumption of 320W.
- A: The recommended power supply for the north American model is AC120 V, 60Hz.
- A: The AVR-3300 model has been reported to `have` digital audio input and interface.
- A: The recommended frequency response for the DIRECT mode is from 10Hz to 50kHz, which is accompanied by a tolerance of +-3 dB.
User Manual
Loading...