Denon AVR-2807 User Manual

A/V Surround Receiver

AVR-2807

The AVR-2807 is Denon's latest addition of versatile A/V Receivers,
which incorporate all current surround formats and enhanced installation
flexibility, all with great simplicity of setup and operation.

Audio section

■ Full discrete 7-channel high power amplifier

Front 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Center 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround back 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)

■ Latest 32-bit floating point DSP for the decoder

• 24-bit/192-kHz D/A converter

• 96kHz A/D converter

■ 'AL24 Processing Plus,' for high sound quality

■ Digital interface receiver supporting 24-bit/192-kHz signals

■ Large-output power amp section and power supply configuration,

for stable high-power output

■ Stable power supply for high-quality sound and picture playback

■ Pure Direct mode, for the pure enjoyment of music in high-quality sound

■ Supports the most advanced surround playback formats

• Dolby Digital EX • Dolby Digital • Dolby Pro Logic IIx

• DTS-ES • DTS 96/24 • DTS Neo:6 • DTS

■ Configurable surround back amplifiers

• Multi-zone system:

environment in a second room.

• "Bi-amp" system: Front (L/R) channels are bi-wired in a 5.1-channel theater to
improve playback quality in the front for enhanced listening enjoyment.

a 5.1-channel theater in the main room and a stereo

Video section

■ HDMI digital video interface supporting high-quality video of 1080p (*1)

The AVR-2807 has HDMI digital video interface terminals (2 inputs and 1 output) that
can be switched for high-resolution 1080p video signal transmission. These HDMI
terminals also support digital input of multi-channel audio signals.

*1) Version 1.1 compliant. Since HDCP is also supported, video cannot be viewed on a non-HDCP display
connected to the AVR-2807; please connect a HDCP-compliant display when viewing video material.

■ Video Up/Down conversion capable of output to HDMI

The AVR-2807 includes a video up/down conversion function that allows the unit to be
connected to the video monitor via a single cable regardless of the video input signal's
format as follows:

1) Composite video signals are converted to HDMI (*2), component video, & S-video;

2) S-video signals are converted to HDMI (*2), component video, & composite video;

3) Component video signals are converted to HDMI (*2), composite video (*3), & S-video (*3).

*2. I/P conversion from 480i/576i to 480p/576p
*3. Down-conversion from component video to composite or S-video applies only to 480i input signals.

■ High-speed, high-accuracy 12-bit/216-MHz Video DAC

■ I/P conversion from 480i to 480p ( When a 480i/576i signal is input from a

Composite Video, S-Video, or Component terminal, it should be output from the
HDMI terminal.)

■ 3 Sets of Component Video Inputs

■ High Definition Quality Video Switching

■ Composite and S-video signal processing

The AVR-2807 uses a time base corrector (TBC) in converting composite video & S-video
signals to component video to suppress jitter in the video signal during playback.

Connectivity/ Expandability

■ Variable subwoofer crossover switching

(40/60/80/90/100/110/120/150/200/250Hz)

■ ASD-1R iPod®Control Dock (option): Supports iPod play-
back when connected to the AVR-2807

iPod (*4) playback can be enjoyed through the AVR-2807 when the
ASD-1R, Denon's original iPod Control Dock (sold separately), is
connected to the dedicated control terminal of the AVR-2807. The
iPod can also be controlled via the remote controller supplied with
the AVR-2807.

*4) Supports 3rd-generation and later iPods equipped with a Dock connector. Some functions may not work
depending on the generation of the iPod and the version of the software..

■ New Auto Set-up and Room EQ, featuring MultEQ from Audyssey,
for overall listening area support using supplied microphone

■ Room EQ Memory

Black version is also available.

AVR-2807

■ Assignable Room EQ

■ Auto Surround Back Channels ON function, for auto-detection of supporting

sources

■ Auto Surround mode

The AVR-2807 can automatically store the surround mode for any of three inputs
signals: (1) Analog and PCM 2 channel, (2) Bit stream 2-channel (Dolby Digital,
DTS) and (3) Bit stream multi-channel.If the type of input signal changes, the most
appropriate surround mode is automatically selected for the signal.

■ Audio Delay function (max. 6 frames or 200 msec)

The Audio Delay function corrects slight lags between sound and picture that
can occur when a video signal is processed,such as in a Progressive Scan
DVD player or outboard video processor.

■ 3 User Mode Buttons

■ Night Mode for not disturbing others

■ XM Satellite Radio Ready with optional 'Connect and Play' antenna*

*Subscription to XM services also required.

■ 8ch Analog EXT IN terminal

Input/Output Terminals For Every A/V System
Audio Inputs

11 Sets Analog Inputs

PHONO, CD, (TUNER), DVD, VDP, TV, DBS, VCR-1, VCR-2, CDR/TAPE, V.AUX (FRONT)

1 Set 8-ch Analog EXT. Input

FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER

7 Sets Digital Input

OPTICAL x 5 (including FRONT x 1) (Assignable)
COAXIAL x 2 (Assignable)

Audio Outputs

1 Set 8-ch Analog PRE Output

FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER

3 Sets Analog REC Output

VCR-1, VCR-2, CDR/TAPE

1 Set Analog Multi Zone LINE Output

ZONE2 L/R

2 Digital Output

OPTICAL x 2

Video Inputs

3 Sets Component Video Input

VIDEO-1, VIDEO-2, VIDEO-3

7 Sets S-Video Input

DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX (FRONT)

7 Sets Composite Input

DVD, VDP, TV, DBS, VCR-1,VCR-2, V.AUX (FRONT)

Video Outputs

2 Sets Component Video Output

MONITOR1, MONITOR2

4 Sets S-Video Output

VCR-1, VCR-2, ZONE2, MONITOR

3 Sets Composite Output

VCR-1, VCR-2, ZONE2, MONITOR

A/B switching between front speakers

■

Other Functions

■

RS-232C terminal, for external 3rd party control systems and possible future upgrades

■ Remote IN/OUT ports

■ +12 V Trigger Output x 2 (Assignable)

■ Muting level settings (∞/-40dB/-20dB)

■ Personal Memory Plus

■ Audio Level Memory, for correcting different signal levels from each input device

■ Volume Level Limiter, for limiting the maximum volume value

■ Power-ON Volume Level Memory

■ On-screen Display

■ Function Rename

■ Setup Lock, for locking the system setup

■ Pre-programmed learning remote controller with GLO-key

■ Detachable AC Power Cord

■ Frequency Synthesis Tuning

56-Station AM/FM Random Preset Memory Tuning

•

• Auto Preset Memory

Specifications
Power Amplifier Section

Rated output *THD figures are power amp stage values.

Front 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Center 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround Back 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

Preamplifier Section

Analog

Input sensitivity / impedance 200mV/47kohms
Frequency response 10Hz-100kHz (+0,-3dB direct mode)
S/N 102dB (direct mode)
Rated output 1.2V

Digital

D/A output 2.0V

Phono

Input sensitivity / impedance 2.5mV
RIAA deviation +/-1dB (20Hz to 20kHz)
Rated output 150mV

Video Section

Frequency response
Composite video/S-video 5Hz-10MHz (+0,-3dB)
Component video 5Hz-100MHz (+0,-3dB)

FM Section

Tuning frequency range 87.5 - 107.9 MHz
Usable sensitivity 1.0 µV (11.2 dBf)

AM Section

Tuning frequency range 520 - 1710 kHz
Usable sensitivity 18 µV

General

Power supply AC120V, 60Hz
Power consumption 6.0 A (1W max at standby mode)
Dimensions 434 (W) x 171 (H) x 429 (D) mm

Weight 14.0 kg, 30 lbs 14oz

17.1'' (W) x 6.7'' (H) x 16.9'' (D)

* Design and specifications are subject to change without notice.
* "Dolby", "Pro Logic", and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation,
* "DTS", "DTS-ES" and "NEO:6" are trademarks of Digital Theater System, Inc.
* HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
* "DCDi" is a trademark of Faroudja, a division of Genesis Microchip Inc.
* Audyssey MultEQ XT is a trademark of Audyssey Laboratories. MultEQ and the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.
* NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc.
* iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Denon Electronics (USA), LLC.

19C Chapin Road, Suite 205 Pine Brook, N.J. 07058-9385 USA
TEL: [phone] usa.denon.com

Denon Canada Inc.

505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: [phone] ca.denon.com

Denon Brand Company

D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kanagawa 210-8569, Japan
www.denon.com