UMM-6 USB Measurement Microphone
•Precision condenser microphone for critical measurement and recording applications
•Connects to your PC or Mac via USB port
•True omnidirectional pattern with calibrated flat frequency response
•Rugged construction with high-quality components
•Compact design; includes sturdy carrying case with foam insert
•Compatible with industry-standard measurement software
•USB Powered – No external power required
•Integrated design eliminates need for additional signal conditioning hardware
Technical Specifications:
•Capsule type: Precision 6 mm electret condenser
•Polar Response: True Omnidirectional
•Frequency Response: 18 Hz - 20 kHz (Calibrated)
•Impedance: N/A (USB Connection)
•Sensitivity at 1 KHz into 1K ohm: 10mV/Pa (-40dBV, re. 0dB = 1V/Pa)
•Max. SPL for 1% THD @ 1000Hz: 127dB
•S/N Ratio: 70 dB A-weighted
•Connector: USB “B”
•Weight: 148 grams (Microphone unit only)
Setup:
To set up the UMM-6 for use, simply plug it into an available USB port on your PC or Mac using the supplied USB cable. The UMM-6 is also compatible with USB extenders. Within Windows, in the Sound control panel, make sure the item “UMM-6” is selected as the recording device. On the Mac OS, in System Preferences > Sound, make sure the “UMM-6” is selected as the Input device.
Calibration:
To deliver the most accurate results, a calibration file must be loaded into the software program being used for audio analysis. This calibration file is generated based on the serial number of your UMM-6. To obtain your calibration file in text format (compatible with most audio analysis software), visit DaytonAudio.com and navigate to the UMM-6 product page. Enter the serial number of your UMM-6, then click on “Download.” Write your serial number in the blank provided below, in case the printed number becomes scratched or worn on the microphone body.
Support:
If you encounter problems or have unanswered questions, please visit the Support page on the Dayton Audio web site for support contact information.
Warranty Information:
This Dayton Audio product is warranted for a period of one year exclusively against defects in materials and workmanship. Dayton Audio is not responsible for any consequential or inconsequential damage to any other unit or component resulting from use or failure of this product. In the rare case of a product failure, please refer to the support contact information above to obtain a replacement under the terms of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. There are no other warranties, express or implied, which extend the foregoing, and there are no warranties of merchantability or fitness for any particular purpose.
Serial No.:
daytonaudio.com
Designed and Engineered in USA
705 Pleasant Valley Drive • Springboro, OH 45066 • Phone: (937) 743-8248
© Dayton Audio®
Loading...