MA1711-EA © 2017 CASIO COMPUTER CO., LTD.
Quick Reference Manual 5554
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Bluetooth® is a registered trademark or trademark of Bluetooth SIG, Inc. of the United States.
Your watch has a Mobile Link function that allows it to communicate with a Bluetooth® mobile phone and adjust its time settings to match those of the mobile phone.
x This product complies with or has received approval under radio laws in various countries and geographic areas. Use of this product in an area where it does not conform to or where it has not been approved under applicable radio laws may be punishable under local laws. For details, visit http://world.casio.com/ce/BLE/.
x Use of this product inside of an aircraft is restricted by the aviation laws of each country. Be sure to obey instructions provided by flight personnel concerning use of devices such as this product.
Visit the website below for the operation manual (Operation Guide) of this watch. http://world.casio.com/manual/wat/
Using the Watch
General Guide
|
4 |
1 |
5 |
|
|
2 |
|
3 |
|
|
9 |
|
6 |
10 |
|
11 |
||
7 |
||
12 |
||
|
||
8 |
13 |
|
|
14 |
1.Mobile phone connection indicator*
2.Graphic area
3.Step indicator
4.Target time alert enabled indicator
5.Auto Light enabled indicator
6.p.m. indicator (No indication for a.m.)
7.Lap time display indicator
8.Split time display indicator
9.Alarm enabled indicator
10.Hourly time signal enabled indicator
11.Summer time indicator
12.Recall Mode indicator
13.Number of steps display indicator
14.Hands shifted indicator
*In the Timekeeping Mode, hold down D for about two seconds to establish a Bluetooth connection with a phone.
Selecting a Mode
Each press of C cycles between modes as shown below.
x Hold down C for about two seconds to enter the Timekeeping Mode.
Timekeeping
Mode
|
Stopwatch Mode |
Recall Mode |
|
C |
C |
|
|
C |
Alarm Mode |
Dual Time Mode |
Timer Mode |
C
C |
C |
Setting the Time
1.In the Timekeeping Mode, hold down A for about two seconds.
2.Press C to display the seconds setting
screen.
x This causes the seconds count to flash.
3.Press D to reset the seconds count
to 00.
x 30 to 59 seconds: Adds 1 to minutes.
4.Press C to move the flashing to the hour setting.
5.Use D and B to change the hour setting.
6.Press C to move the flashing to the minute setting.
7.Use D and B to change the minute setting.
8.Press C twice to move the flashing to the year setting.
9.Use D and B to change the year setting.
10.Press C to move the flashing to the month setting.
11.Use D and B to change the month setting.
12.Press C to move the flashing to the day setting.
13.Use D and B to change the day setting.
14.After all the settings are the way you want, press A to exit.
Specifications
Accuracy at Normal |
±15 seconds per month average when time adjustment by |
Temperature: |
communication with a phone is not possible. |
Analog Timekeeping: |
Hour, minute (moves every 20 seconds) |
Digital Timekeeping: |
Hour, minute, second, month, day, day of the week, a.m./p.m. |
|
(P)/24-hour timekeeping, Full Auto Calendar (2000 to 2099), |
|
Summer Time |
Pedometer: |
Step count using a 3-axis accelerometer |
|
Step count display range: 0 to 999,999 |
|
Step indicator |
|
Step count graph |
|
Step count reset |
|
Auto reset at midnight each day |
|
Manual reset |
|
Daily step goal setting |
|
Step count setting unit: 1,000 steps |
|
Step count setting range: 1,000 to 50,000 steps |
|
Step count accuracy: ±3% (According to vibration testing) |
|
Power Saving |
Stopwatch/Data Recall: |
Measurement unit: 1/100 seconds (first hour); |
|
1 second (after first hour) |
|
Measurement range: 23 hours, 59 minutes, 59 seconds |
|
Measurement functions: Normal elapsed time; cumulative |
|
time; lap/split times; 200-record data |
|
memory |
|
Target time alarm: |
|
Up to 10 time settings; watch beeps (10 seconds) when a |
|
target time is reached |
Timer: |
Unit: 1 second |
|
Range: 60 minutes |
|
Number of intervals: 1 to 5 |
|
Number of auto repeats: 1 to 20 |
|
Time setting unit: 1 second |
|
Time setting range: 1 second to 60 minutes |
|
Beep every second for final 5 seconds, alert beeper at the end |
|
of the countdown. |
|
Auto Start |
Dual Time: |
Hour, minute, second |
|
Swapping with Home Time |
Alarms: |
Daily Alarms |
|
Number of alarms: 5 |
|
Setting units: Hours, minutes |
|
Alarm tone duration: 10 seconds |
|
Hourly time signal: Beep every hour on the hour |
Mobile Link: |
Auto time correction |
|
Time setting adjusted automatically at preset time. |
|
One-touch time correction |
|
Manual connection and time adjustment |
|
Phone finder |
|
Watch operation sounds the alert sound of the mobile |
|
phone. |
|
World Time |
|
Current time for approximately 300 cities selected for the |
|
watch |
|
Home Time/World Time swapping |
|
Step count data transfer |
|
Step count, calories |
|
Stopwatch data transfer |
|
200 lap/split time records |
|
(date and time, lap/split time, lap number) |
|
Auto summer time switching |
|
Automatic switching between standard time and summer |
|
time |
|
Timer setting |
|
Alarm setting |
|
Hand position correction |
|
Data Communication Specifications |
|
Bluetooth® |
|
Frequency band: 2400 MHz to 2480 MHz |
|
Maximum transmission: 0 dBm (1 mW) |
|
Communication range: 2 meters max. |
|
(depends on environment) |
Other: |
High-brightness LED light; illumination duration setting; |
|
Auto Light; operation tone on/off; Hand Shift; Low Battery Alert |
Power Supply: |
One lithium battery (CR2016) |
|
Battery life: Approximately 2 years |
|
Conditions: |
|
x Auto time correction: 4 times/day |
|
x Alarm: Once (10 seconds)/day |
|
x Illumination: Once (1.5 seconds)/day |
|
x Step counting: 12 hours/day |
Specifications are subject to change without notice.
1